Wiki-DB - User contributions [en]

Main Page

2016-08-17T12:16:13Z

Tbreyer:

__NOTOC__
{| style="width: 100%; color: #000000; border-spacing: 2px; border: 1px solid darkgray;" valign="top" |
| style="width: 25%; text-align: center;" |
| style="width: 50%; text-align: center;" |
| style="width: 25%; text-align: center;" |
|-
| style="text-align: center;" | [[Image:Welcome.jpg|200px|Welcome to DH electronics MediaWiki]]
| style="text-align: center;" | [[Image:LOGO_DH_electronics.jpg|250px|Welcome to DH electronics MediaWiki]]
| style="text-align: center;" | [[Image:Mediawiki.jpg|183px|Welcome to DH electronics MediaWiki]]
|}

''Welcome to DH electronics new MediaWiki. This Wiki has the aim to provide our customers technical support for DH electronics products.''

----

{| style="width: 100%; color: #000000;"
|[[Image:DHCM-120pix-ws.jpg|DH Computer on Module|link=DHCOM]]
|
|
=== [[DHCOM|<span style="color:black;">DHCOM</span>]] ===

A '''Computer On Module''' (COM) is a powerful embedded computer on a compact circuit board.

Our DHCOM modules offer high performance coupled with extensive features and interfaces, low power consumption<br>as well as compact size.Possible applications for our modules are in visualization, multimedia, automation and communication devices

Click '''[[DHCOM|here]]''' to get support information for our '''[[DHCOM]]''' products.
| style="text-align: right;" |[[Image:DHCM_AM35_D2_persp_h120px.jpg|DHCOM AM3517]]
|}

----

COM iMX25 WinCE

2012-03-06T13:48:40Z

Tbreyer:

== FAQ ==
:'''Q: How long does it take to start WinCE from MicroSD Card?'''
:'''A:''' Start time is depending on the image size. With normal image size of 10MByte (nk.gz file) it takes roughly 18 up to 20 seconds to boot WinCE.
:'''Q: How long does it take to start WinCE from NAND flash?'''
:'''A:''' Start time is depending on the image size. With normal image size of 10MByte (nk.gz file) it takes roughly 16 up to 18 seconds to boot WinCE.

== Registry Settings ==

=== LCD Controller ===

[HKEY_LOCAL_MACHINE\Drivers\Display\LCDC]
"PanelType"=dword:1 ; LCD Panel identifier
; Description: Set "PanelType" = 0 to use the bootloader LCD controller settings, which can be programmed to NAND Flash via settings.bin file.
[HKEY_LOCAL_MACHINE\SYSTEM\GDI\ROTATION]
"Angle"=dword:0 ; no rotation
; "Angle"=dword:5A --> 90 degrees rotated clockwise
; "Angle"=dword:B4 --> 180 degrees rotated clockwise
; "Angle"=dword:10E --> 270 degrees rotated clockwise

=== Task Bar Look ===

[HKEY_LOCAL_MACHINE\Explorer]
“QVGA“=dword:00000001 ; Change Task bar style: 0 --> normal Windows look, 1 --> PDA look

=== NAND Flash (FlashDisk) base address===

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\NAND_Flash]
“FlashDiskBaseAddress“=dword:02000000 ; Configures the WinCE NAND FlashDisk Base address

DHCOM PXA270-D2

2012-03-06T13:41:24Z

Tbreyer: /* FAQ List */

[[Image:COMPXA270.png|600px|COM AM35-D2]]

== FAQ List ==
1. The Core Module doesn't restart after the supply voltage is disconnected and connected again.
Reason: This problem appears, if a active USB Hub is connected to the device.
Workaround: Ensure, that the USB Hub voltage will also be interrupted if the supply voltage of the core module is disconnected.

Main Page

2012-03-06T13:38:44Z

Tbreyer:

'''Welcome on MediaWiki at DH electronics...'''

== Getting started ==
* [http://www.mediawiki.org/wiki/Manual:Configuration_settings Configuration settings list]
* [http://www.mediawiki.org/wiki/Manual:FAQ MediaWiki FAQ]
* [https://lists.wikimedia.org/mailman/listinfo/mediawiki-announce MediaWiki release mailing list]

File:Stuhlkopf.zip

2011-11-29T07:03:19Z

Tbreyer: