View source for Add Yocto SDK with QT5 to QT Creator

The following instructions are based on '''DHCOM STM32MP1''' computer on module and Yocto version "zeus"
__TOC__


== Prepairing your virtual machine ==

Get the [[Virtual Machine for Application Development]].

Install the following package:

 $ sudo apt-get install qtcreator qt5default

== Download and install the SDK package ==

Get the [https://www.dropbox.com/s/iebkbf86dvxdeyk/dhlinux-glibc-x86_64-meta-toolchain-qt5-cortexa7t2hf-neon-vfpv4-toolchain-nodistro.0.zip?dl=0 QT5 SDK for STM32mp1]

Unpack the archive and install the toolchain. 

 $ sh ./dhlinux-glibc-x86_64-meta-toolchain-qt5-cortexa7t2hf-neon-vfpv4-toolchain-nodistro.0.sh

Choose the installation directory (default: /opt/dhlinux/nodistro.0/).

The toolchain is now installed to your system.

== Configure Qt Creator ==

Run QT Creator

In Qt Creator go to Tools > Options > Devices and add your Wandboard as a generic linux device.

[[Image:Qtcreator-add-device.jpg|550px]]

go to Tools > Options > Build & Run and:

Add a new c++ compiler. Select your compiler: /opt/dhlinux/nodistro.0/sysroots/x86_64-oesdk-linux/usr/bin/arm-dhlinux-linux-gnueabi/arm-dhlinux-linux-gnueabi-g++

[[Image:Qtcreator-add-compiler.jpg|850px]]

Add a new debugger. Select your debugger: /opt/dhlinux/nodistro.0/sysroots/x86_64-oesdk-linux/usr/bin/arm-dhlinux-linux-gnueabi/arm-dhlinux-linux-gnueabi-gdb

[[Image:Qtcreator-add-debugger.jpg|850px]]

Add your Qt version by selecting the qmake located in /opt/dhlinux/nodistro.0/sysroots/x86_64-oesdk-linux/usr/bin/qmake

[[Image:Qtcreator-add-qt-version.jpg|850px]]

Add a new kit selecting your new Qt5 version and compiler and setting the sysroot to /opt/dhlinux/nodistro.0/sysroots/cortexa7t2hf-neon-vfpv4-dhlinux-linux-gnueabi and leave the Qt mkspec empty.
Finally select your device

[[Image:Qtcreator-add-kit.jpg|850px]]

If there is a warning/error shown, please click apply between each step