Avenger96 UMS Image Programming - Revision history

Ageisreiter: /* Start UMS mode in U-Boot and flash the image */

2022-07-01T09:51:34Z

Start UMS mode in U-Boot and flash the image

← Older revision		Revision as of 11:51, 1 July 2022
Line 5:		Line 5:
	== Start UMS mode in U-Boot and flash the image ==		== Start UMS mode in U-Boot and flash the image ==
	* Set Avenger96 boot mode to SPI boot.		* Set Avenger96 boot mode to SPI boot.
			[[Image:AV96-SPI-boot.jpg\|200px\|COM Avenger96Board]]
	* Start the board and stop in U-Boot by pressing any key.		* Start the board and stop in U-Boot by pressing any key.
	* Connect USB cable between USB OTG and PC host port and call the following from U-Boot command line.		* Connect USB cable between USB OTG and PC host port and call the following from U-Boot command line.

Ageisreiter: /* Update U-Boot from USB stick */

2022-07-01T09:43:23Z

Update U-Boot from USB stick

@@ Line 19: / Line 19: @@
 * Run the script
   run update_sf
 * Restart the board -> New U-Boot will start up and will load the flashed dh-image-demo

Ageisreiter: /* Start UMS mode in U-Boot and flash the image */

2022-07-01T09:41:55Z

Start UMS mode in U-Boot and flash the image

← Older revision		Revision as of 11:41, 1 July 2022
Line 8:		Line 8:
	* Connect USB cable between USB OTG and PC host port and call the following from U-Boot command line.		* Connect USB cable between USB OTG and PC host port and call the following from U-Boot command line.
	ums 0 mmc 1		ums 0 mmc 1
	-> Mass storage is detected from the ~~Host~~ PC.		-> Mass storage is detected from the host PC.
	* Now you can use balena etcher to flash the dh-image-demo to eMMC.		* Now you can use balena etcher to flash the dh-image-demo to eMMC.

Ageisreiter: /* Get the U-Boot binaries */

2022-07-01T09:40:46Z

Get the U-Boot binaries

← Older revision		Revision as of 11:40, 1 July 2022
Line 25:		Line 25:
	* [[media:Dhcor-stm32mp1-bootloader_2022-06-13.zip\|Avenger96 U-Boot binaries 2022-06-13 U-Boot 2022.01-00002-g0065a16eff (Jun 13 2022 - 06:45:18 +0200)]]		* [[media:Dhcor-stm32mp1-bootloader_2022-06-13.zip\|Avenger96 U-Boot binaries 2022-06-13 U-Boot 2022.01-00002-g0065a16eff (Jun 13 2022 - 06:45:18 +0200)]]
	* [https://github.com/dh-electronics/u-boot-stm32mp1/tree/release/2022.01_dhsom/20220614 Sources U-Boot 2022.01-00002-g0065a16eff --> Github]		* [https://github.com/dh-electronics/u-boot-stm32mp1/tree/release/2022.01_dhsom/20220614 Sources U-Boot 2022.01-00002-g0065a16eff --> Github]
			* [https://wiki.dh-electronics.com/index.php/DHCOM_STM32MP1_Bootloader_U-Boot How to build U-Boot]

Ageisreiter: /* Get the U-Boot binaries */

2022-07-01T09:39:13Z

Get the U-Boot binaries

← Older revision		Revision as of 11:39, 1 July 2022
Line 24:		Line 24:

	* [[media:Dhcor-stm32mp1-bootloader_2022-06-13.zip\|Avenger96 U-Boot binaries 2022-06-13 U-Boot 2022.01-00002-g0065a16eff (Jun 13 2022 - 06:45:18 +0200)]]		* [[media:Dhcor-stm32mp1-bootloader_2022-06-13.zip\|Avenger96 U-Boot binaries 2022-06-13 U-Boot 2022.01-00002-g0065a16eff (Jun 13 2022 - 06:45:18 +0200)]]
			* [https://github.com/dh-electronics/u-boot-stm32mp1/tree/release/2022.01_dhsom/20220614 Sources U-Boot 2022.01-00002-g0065a16eff --> Github]

Ageisreiter at 09:37, 1 July 2022

2022-07-01T09:37:49Z

← Older revision		Revision as of 11:37, 1 July 2022
Line 3:		Line 3:
	This guide is about how to flash the AV96 board via universal mass storage.		This guide is about how to flash the AV96 board via universal mass storage.

			== Start UMS mode in U-Boot and flash the image ==
			* Set Avenger96 boot mode to SPI boot.
			* Start the board and stop in U-Boot by pressing any key.
			* Connect USB cable between USB OTG and PC host port and call the following from U-Boot command line.
			ums 0 mmc 1
			-> Mass storage is detected from the Host PC.
			* Now you can use balena etcher to flash the dh-image-demo to eMMC.

	== ~~Install STM32 Cube Programmer~~ ==		== Update U-Boot from USB stick ==

			After the image update you will have the problem, that the originally flashed U-Boot is not capable to load the new Image. To fix this you have to update the U-Boot on the SPI flash:
			* Copy the U-Boot and SPL binaiers to a USB stick and plugin the flash drive at the AVenger96 Host port
			* Start U-Boot and set the following ENV variable:
			env set update_sf 'usb start && env set loadaddr 0xc2000000 && env set loadaddr1 0xd2000000 && load usb 0 ${loadaddr1} u-boot-spl.stm32 && env set filesize1 ${filesize} && load usb 0 ${loadaddr} u-boot.itb && sf probe && sf erase 0 0x200000 && sf update ${loadaddr1} 0 ${filesize1} && sf update ${loadaddr1} 0x40000 ${filesize1} && sf update ${loadaddr} 0x80000 ${filesize} && env set filesize1 && env set loadaddr1'
			* Run the script
			run update_sf
			* Restart the board -> New U-Boot will start up and will load the flashed dh-image-demo

	~~Download~~ the ~~installer from the [https://www.st.com/en/development~~-~~tools/stm32cubeprog.html official STM32 Cube Programmer site].~~		== Get the U-Boot binaries ==

	~~Follow ST's installation instructions~~.		* [[media:Dhcor-stm32mp1-bootloader_2022-06-13.zip\|Avenger96 U-Boot binaries 2022-06-13 U-Boot 2022.01-00002-g0065a16eff (Jun 13 2022 - 06:45:18 +0200)]]


	~~== Get the image ==~~

Ageisreiter: Created page with "== Introduction == This guide is about how to flash the AV96 board via universal mass storage. == Install STM32 Cube Programmer == Download the installer from the [https:..."

2022-07-01T09:27:03Z

Created page with "== Introduction == This guide is about how to flash the AV96 board via universal mass storage. == Install STM32 Cube Programmer == Download the installer from the [https:..."

New page

== Introduction ==

This guide is about how to flash the AV96 board via universal mass storage.

== Install STM32 Cube Programmer ==

Download the installer from the [https://www.st.com/en/development-tools/stm32cubeprog.html official STM32 Cube Programmer site].

Follow ST's installation instructions.

== Get the image ==