Yocto - Revision history

Mschmoeller: /* Example Configurations */

2020-05-13T12:13:04Z

Example Configurations

← Older revision		Revision as of 14:13, 13 May 2020
Line 38:		Line 38:
	== Example Configurations ==		== Example Configurations ==

	*'''[[Building Qt5 using Yocto \| Building Qt5 using Yocto]]'''		*'''[[Add Yocto SDK with QT5 to QT Creator \| Add Yocto SDK with QT5 to QT Creator]]'''
			*'''[[Building Qt5 for i.MX6 using Yocto Dizzy\| Building Qt5 for i.MX6 using Yocto Dizzy]]'''
	*'''[[Building Chromium, VLC and X11VNC using Yocto \| Building Chromium, VLC and X11VNC using Yocto]]'''		*'''[[Building Chromium, VLC and X11VNC using Yocto \| Building Chromium, VLC and X11VNC using Yocto]]'''

2020-02-24T15:20:44Z

Setup Yocto Build System & Build Image

← Older revision		Revision as of 17:20, 24 February 2020
Line 33:		Line 33:
	\| [[Setup Yocto for Dizzy/Krogoth \| Dizzy/Krogoth]] (i.MX6S/DL/D/Q)		\| [[Setup Yocto for Dizzy/Krogoth \| Dizzy/Krogoth]] (i.MX6S/DL/D/Q)
	\|- align="center"		\|- align="center"
	\| [~~[Setup Yocto for~~ Thud ~~\| Thud ]~~] (i.MX6ULL only)		\| [https://github.com/dh-electronics/dhcom_imx6-bsp-platform/tree/thud Thud] (i.MX6ULL only)
	\|}		\|}

2019-06-03T11:56:16Z

Setup Yocto Build System & Build Image

← Older revision		Revision as of 13:56, 3 June 2019
Line 31:		Line 31:
	! Name		! Name
	\|- align="center"		\|- align="center"
	\| [[Setup Yocto for Dizzy/Krogoth \| Dizzy/Krogoth]] (i.~~MX6qdl~~)		\| [[Setup Yocto for Dizzy/Krogoth \| Dizzy/Krogoth]] (i.MX6S/DL/D/Q)
	\|- align="center"		\|- align="center"
	\| [[Setup Yocto for Thud \| Thud ]] (i.MX6ULL only)		\| [[Setup Yocto for Thud \| Thud ]] (i.MX6ULL only)
	\|}		\|}



	== Example Configurations ==		== Example Configurations ==

2019-06-03T11:55:34Z

← Older revision		Revision as of 13:55, 3 June 2019
Line 19:		Line 19:
	\| Krogoth \|\| 2.1		\| Krogoth \|\| 2.1
	\|- align="center"		\|- align="center"
	\| Thud (i.~~MX6ull~~ only)\|\| 2.6		\| Thud (i.MX6ULL only)\|\| 2.6
	\|}		\|}

Line 33:		Line 33:
	\| [[Setup Yocto for Dizzy/Krogoth \| Dizzy/Krogoth]] (i.MX6qdl)		\| [[Setup Yocto for Dizzy/Krogoth \| Dizzy/Krogoth]] (i.MX6qdl)
	\|- align="center"		\|- align="center"
	\| [[Setup Yocto for Thud \| Thud ]] (i.~~MX6ull~~ only)		\| [[Setup Yocto for Thud \| Thud ]] (i.MX6ULL only)
	\|}		\|}

2019-03-18T11:21:37Z

← Older revision		Revision as of 13:21, 18 March 2019
Line 36:		Line 36:
	\|}		\|}

	~~== Running the image on DHCOM i.MX6 ==~~
	As this is just a console image, you will need a serial terminal program such as minicom in order to interact with the board and run commands. Simply plug the microSD card into the slot on the DHCOM i.MX6 module and apply power. You should immediately see log messages in the serial terminal. When complete, you should get a login prompt:

	~~Poky (Yocto Project Reference Distro) 2.1.2 dhcom3bimx6dl /dev/ttymxc0<br/>~~
	~~dhcom3bimx6dl login:~~

	~~The default login username is 'root' and there is no password.~~

2019-03-18T10:41:24Z

Setup Yocto Build System & Build Image

← Older revision		Revision as of 12:41, 18 March 2019
Line 31:		Line 31:
	! Name		! Name
	\|- align="center"		\|- align="center"
	\| [[~~SetupYoctoDizzyKrogoth~~ \| Dizzy/Krogoth]] (i.MX6qdl)		\| [[Setup Yocto for Dizzy/Krogoth \| Dizzy/Krogoth]] (i.MX6qdl)
	\|- align="center"		\|- align="center"
	\| [[~~SetupYoctoThud~~ \| Thud ]] (i.MX6ull only)		\| [[Setup Yocto for Thud \| Thud ]] (i.MX6ull only)
	\|}		\|}


	== Running the image on DHCOM i.MX6 ==		== Running the image on DHCOM i.MX6 ==

2019-03-18T10:39:40Z

2019-03-14T13:53:59Z

@@ Line 18: / Line 18: @@
 |- align="center"
 | Krogoth || 2.1
 |}
@@ Line 24: / Line 26: @@
 More information about Yocto stable branch maintenance at [https://wiki.yoctoproject.org/wiki/Stable_branch_maintenance https://wiki.yoctoproject.org/]
-== Setup Yocto Build System ==
+== Setup Yocto Build System (Thud - i.MX6ull only) ==
 ==== Install Required Host Packages ====
@@ Line 80: / Line 147: @@
   ${BSPDIR}/sources/meta-dhcom_imx6 \
-== Setup environment and build an image ==
+== Setup environment and build an image (Krogoth & Dizzy) ==
 To start a build, first set the MACHINE shell environment variable to set the machine.  These are: <br/>

2017-09-19T13:05:48Z

Add DHCOM i.MX6 BSP layer

← Older revision		Revision as of 15:05, 19 September 2017
Line 76:		Line 76:
	$: git clone -b krogoth https://github.com/dh-electronics/meta-dhcom_imx6.git		$: git clone -b krogoth https://github.com/dh-electronics/meta-dhcom_imx6.git

	Edit <code>fsl-community-bsp/build/conf/bblayers.conf</code> (run bitbake once to create build directory, see 'Setup environment and build an image') to add the meta-dhcom_imx6 layer at the end:		Edit <code>~/fsl-community-bsp/build/conf/bblayers.conf</code> (run bitbake once to create build directory, see 'Setup environment and build an image') to add the meta-dhcom_imx6 layer at the end:

	${BSPDIR}/sources/meta-dhcom_imx6 \		${BSPDIR}/sources/meta-dhcom_imx6 \

2017-09-19T13:05:17Z

Add DHCOM i.MX6 BSP layer

← Older revision		Revision as of 15:05, 19 September 2017
Line 76:		Line 76:
	$: git clone -b krogoth https://github.com/dh-electronics/meta-dhcom_imx6.git		$: git clone -b krogoth https://github.com/dh-electronics/meta-dhcom_imx6.git

	Edit fsl-community-bsp/build/conf/bblayers.conf (run bitbake once to create build directory, see 'Setup environment and build an image') to add the meta-dhcom_imx6 layer at the end:		Edit <code>fsl-community-bsp/build/conf/bblayers.conf</code> (run bitbake once to create build directory, see 'Setup environment and build an image') to add the meta-dhcom_imx6 layer at the end:

	${BSPDIR}/sources/meta-dhcom_imx6 \		${BSPDIR}/sources/meta-dhcom_imx6 \