First steps: Difference between revisions
From Wiki-DB
Jump to navigationJump to search
Created page with "=== Quick Start === Follow these steps for a quick start: # Insert a DHCOM Module in the SODIMM socket U5 on Development Kit # Plug in a “display board” on the corresponding..." |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
=== Quick Start === | === Quick Start === | ||
''DH COM > DHeva01 Development Kit > First steps'' | |||
Follow these steps for a quick start: | Follow these steps for a quick start: | ||
Latest revision as of 14:13, 7 April 2011
Quick Start
DH COM > DHeva01 Development Kit > First steps
Follow these steps for a quick start:
- Insert a DHCOM Module in the SODIMM socket U5 on Development Kit
- Plug in a “display board” on the corresponding connector U6, a keyboard and a mouse on the USB port
- Connect an external power supply to the board by the X22 or X23 connector (24V)
- The system will start as soon as the power supply is connected. There are five LEDs which are tuned on if the power supply circuit is correctly providing 1.8V, 3.3V, 5V and 12V power rails.
- Now the preinstalled operating system will boot.
