Yocto: Difference between revisions
From Wiki-DB
Jump to navigationJump to search
Mschmoeller (talk | contribs) |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 33: | Line 33: | ||
| [[Setup Yocto for Dizzy/Krogoth | Dizzy/Krogoth]] (i.MX6S/DL/D/Q) | | [[Setup Yocto for Dizzy/Krogoth | Dizzy/Krogoth]] (i.MX6S/DL/D/Q) | ||
|- align="center" | |- align="center" | ||
| [ | | [https://github.com/dh-electronics/dhcom_imx6-bsp-platform/tree/thud Thud] (i.MX6ULL only) | ||
|} | |} | ||
== Example Configurations == | == Example Configurations == | ||
*'''[[Building Qt5 using Yocto | Building Qt5 using Yocto]]''' | *'''[[Add Yocto SDK with QT5 to QT Creator | Add Yocto SDK with QT5 to QT Creator]]''' | ||
*'''[[Building Qt5 for i.MX6 using Yocto Dizzy| Building Qt5 for i.MX6 using Yocto Dizzy]]''' | |||
*'''[[Building Chromium, VLC and X11VNC using Yocto | Building Chromium, VLC and X11VNC using Yocto]]''' | *'''[[Building Chromium, VLC and X11VNC using Yocto | Building Chromium, VLC and X11VNC using Yocto]]''' | ||
Latest revision as of 13:13, 13 May 2020
For general information about the Yocto Project please refer to the official Website. "Yocto is not an embedded Linux distribution – it creates a custom one for you." This says that if you are using Yocto to build your system image you are the distributor. If you're not aware of what this means for you please contact us.
Requirements hardware and software
- Linux-based (Debian/Ubuntu is recommended) host system to use for building Linux/Yocto
- min 4GB RAM / > 8GB RAM are recommended
- disk space (depending on image to build about 80 GB)
- a microSD card-reader to write the generated image to the microSD card
Supported Stable Branch
With our OpenEmbedded / Yocto BSP Layer for DHCOM i.MX6 we support the following branches:
| Name | Version |
|---|---|
| Dizzy | 1.7 |
| Krogoth | 2.1 |
| Thud (i.MX6ULL only) | 2.6 |
Our BSP layer is based on the Freescale Community BSP.
More information about Yocto stable branch maintenance at https://wiki.yoctoproject.org/
Setup Yocto Build System & Build Image
| Name |
|---|
| Dizzy/Krogoth (i.MX6S/DL/D/Q) |
| Thud (i.MX6ULL only) |
Example Configurations
- Add Yocto SDK with QT5 to QT Creator
- Building Qt5 for i.MX6 using Yocto Dizzy
- Building Chromium, VLC and X11VNC using Yocto
External References
- The content of this tutorial heavily borrowed from i.MX6 Wandboard Wiki 'Getting started with Yocto on Wandboard'
- Have a look at 'Building Qt5 using yocto on Wandboard' to get information for adding Qt5
- Documentation of the latest Yocto Project Releases
- More additional information on Freescale Yocto Project Main-Page
