COM iMX6 Bootloader U-Boot: Difference between revisions
From Wiki-DB
Jump to navigationJump to search
Ageisreiter (talk | contribs) Created page with "== FAQ == == Downloads == == Enter Bootloader Console == :#Connect DHCOM UART1 (FF UART) via null modem cable to the RS232 Port of your PC :#Start terminal program (e.g. Tera T..." |
Ageisreiter (talk | contribs) No edit summary |
||
| Line 6: | Line 6: | ||
:#Connect DHCOM UART1 (FF UART) via null modem cable to the RS232 Port of your PC | :#Connect DHCOM UART1 (FF UART) via null modem cable to the RS232 Port of your PC | ||
:#Start terminal program (e.g. Tera Term) on the Host PC with the following settings: | :#Start terminal program (e.g. Tera Term) on the Host PC with the following settings: | ||
:#:Baud rate: | :#:Baud rate: 115200 | ||
:#:Data: 8 bit | :#:Data: 8 bit | ||
:#:Parity: none | :#:Parity: none | ||
Revision as of 09:32, 26 May 2014
FAQ
Downloads
Enter Bootloader Console
- Connect DHCOM UART1 (FF UART) via null modem cable to the RS232 Port of your PC
- Start terminal program (e.g. Tera Term) on the Host PC with the following settings:
- Baud rate: 115200
- Data: 8 bit
- Parity: none
- Stop bits: 1 bit
- Flow control: none
- Press "del" on the Host PC during Core Module system start to enter bootloader console
