Avenger96

Introduction

The AVENGER Board is a 96Boards compliant consumer edition board based on the STM32MP15 series of SoCs. The STM32MP15 series is a highly integrated multi-market applications processor designed to enable secure and portable applications within the Internet of Things. AVENGER board features Dual-core Arm® Cortex®-A7 processors operating at up to 650 Hz, Single core Arm® Cortex® M4 operating up to 200 MHz. In addition, an extensive set of interfaces and connectivity peripherals are included to interface to cameras, touch-screen displays, MMC/SD cards and media processor engine. It also fully supports wireless communication, including WLAN and BLE.

Technical Details

STM32MP157AAC 2x ARM® Cortex-A7 up to 650 MHz 1x ARM® Cortex-M4 up to 200 MHz GPU 1x 3D GPU Vivante® @ 533 MHz - OpenGL® ES 2.0 PMIC STPMIC1A DDR3 DRAM 1024 Mbyte @ 533 MHz eMMC Flash 8 Gbyte, v4.51 interface NOR Flash 2 Mbyte, Quad SPI interface EEPROM 128 byte microSD Socket UHS-I speed grade, v3.01 USB Host 2x type A, 2.0 high-speed USB OTG 1x type micro-AB, 2.0 high-speed HDMI WXGA (1366x768) @ 60 fps, HDMI 1.4 WiFi / Bluetooth WiFi 5 GHz & 2.4GHz IEEE 802.11a / b / g / n / ac Bluetooth® v4.2 (BR/EDR/BLE) PCB antenna Ethernet 10 / 100 / 1000 Mbit/s, IEEE 802.3-compliant

Push-Buttons Power and reset Battery Socket CR1216, CR1220 and CR1225 LEDs 4x green user controlled LEDs 1x blue Bluetooth enabled 1x yellow WiFi enabled 1x red power supply okay Boot Mode 3 bit boot mode switch Debug Interface JTAG interface via tag-connect Supply (SYS_DCIN) 8 - 18 VDC Temperature Range 0 - 40 °C Dimensions 100 x 85 mm Serial Peripherals 2 x UART 2 x I2C 1 x I2S 1 x SPI 1 x GPIOs

Downloads

Documents

• Getting-Started

Images

• Avenger96 v1.2 Starter Image

Changelog v1.1 to v1.2:

• /home/root folder contains simple OpenAMP demo
• HSLVEN_QSPI fix (from ST) was added to make QSPI boot work again with PRODUCT_BELOW_2V5 programmed

Changelog v1.0 to v1.1:

• Updated U-Boot which programs the PRODUCT_BELOW_2V5 fuse if necessary and reboots the board
• BUCK3 voltage changed to 2.5V which enables Gbit ethernet support
• Icon added in Weston for starting glmark2-es2-wayland
• /etc/issue contains version info
• Reduced display resolution of HDMI

Old Images:

• Avenger96 v1.1 Starter Image
• Avenger96 Embedded World v1.0 Starter Image

Links

• 96Boards