ELBE Overview: Difference between revisions

Newer edit →

Revision as of 15:03, 24 September 2012

The Embedded Linux Build Environment (elbe) is a Debian based System to generate root-filesystems for embedded devices.

General Notes

Generally root-filesystem creation faces the following requirements:

Creation of root-filesystem for a specific architecture.
Generation of a development environment for the specific architecture.

Trying to solve this via cross-compilation of the required packages, we face the following problems:

Many packages are not designed and tested for cross-compilation.
Big projects consume a significant amount of time to cross compile.
Dependencies are not resolved automatically. The Engineer is required to manually find out which package versions of dependencies are required.
Changes and patches to the packages need to be updated to new version, this process makes an update a very time consuming process.
One must make sure that the same toolchain is used in the development environment, and root-filesystem.

Elbe takes a different approach at solving these Problems:

Standard Packages are not self compiled. We use the Debian distributions binary packages.
Own applications are not cross compiled, but built natively on the target architecture in a virtual machine or emulator.
The root-filesystem is a subset of of the debian system on the virtual development machine. This implicitly ensures, that the same toolchain is used on development machine and target.
Updates, addition or package removal is done via debians package-management (apt), which also solves all the dependency problems.

Installation

Elbe is shipped as debian package. This package will pull the necessary dependencies.

Configure /etc/apt/sources.list.d appropriately and install it using the following command:

aptitude install elbe

Overview

The Elbe system consists of the Program elbe, which is completely implemented in Python. Similar to git, it can be called with several sub commands. For example:

elbe <command>
elbe create --directory /scratch/example example.xml
elbe chg_archive example.xml archive.tar.bz2

An elbe Project consist of an xml file, that describes the project. This description includes the kernel and initrd, which is used to boot the emulator. When creating a project, this kernel and initrd can be downloaded using the elbe dl_kernel command.

Then we use the elbe create command to generate the project directory, which contains the virtual hard disk image and Makefile to create the buildimage and root file system. We change to the project directory, and run make.

This will start the root-filesystem generation process:

The stock debian installer initrd is modified by elbe, so that it doesn’t ask questions during install. And it hooks the image generation into the install process.
emulator is run with the specified kernel and initrd.
inside the emulator, Debian installer will install the distribution without asking questions.
The final step of the installer is to start the image generation.
Image generation creates a copy of the buildimage. (We have a set of modes for this copy)
To this copy the fine-tuning commands are applied.
And the archive is unpacked into the copy.
According to what is specified in the xml file. The copy is then baked into a tar archive or filesystem image.

This diagram illustrates the Process:

Inside the emulator, the following happens:

Example XML Files

A root-filesystem-project is described via an xml file.

Elbe ships with a set of example xml files.

This xml file describes a simple system in the default full copy mode. The root filesystem is essentially identical to the build system, and it will be saved as nfsroot.tar.gz

arm-example.xml

<ns0:RootFileSystem xmlns:ns0="https://www.linutronix.de/projects/Elbe"
        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
        created="2009-05-20T08:50:56" revision="4"
        xsi:schemaLocation="https://www.linutronix.de/projects/Elbe dbsfed.xsd">
        <project>
                <name>ARMexample</name>
                <version>08.15</version>
                <mirror>
                        <primary_host>debian.tu-bs.de</primary_host>
                        <primary_path>/debian</primary_path>
                        <primary_proto>http</primary_proto>
                </mirror>
                <noauth />
                <suite>squeeze</suite>
                <buildimage>
                        <arch>armel</arch>
                        <size>20G</size>
                        <mem>256</mem>
                        <interpreter>qemu-system-arm</interpreter>
                        <console>ttyAMA0,115200n1</console>
                        <machine>versatilepb</machine>
                        <NIC>
                                <model>smc91c111</model>
                                <MAC>de:ad:be:ef:be:05</MAC>
                        </NIC>
                        <portforwarding>
                                <forward>
                                        <proto>tcp</proto>
                                        <buildenv>22</buildenv>
                                        <host>5022</host>
                                </forward>
                        </portforwarding>
                        <pkg-list>
                        </pkg-list>
                </buildimage>
        </project>
        <target>
                <hostname>myARM</hostname>
                <domain>tec.linutronix.de</domain>
                <passwd>foo</passwd>
                <console>ttyS0,115200</console>
                <package>
                        <tar>
                                <name>nfsroot.tar.gz</name>
                        </tar>
                </package>
                <finetuning>
                </finetuning>
                <pkg-list>
                        <pkg>build-essential</pkg>
                        <pkg>bash</pkg>
                        <pkg>less</pkg>
                        <pkg>git</pkg>
                        <pkg>debhelper</pkg>
                        <pkg>nfs-common</pkg>
                        <pkg>openssh-server</pkg>
                </pkg-list>
        </target>
</ns0:RootFileSystem>

This xml file is lacking the kernel and initrd tags, which are necessary for a successful build.

The following command will download these, and include them into the xml file:

elbe dl_kernel example.xml

To generate the project directory from the xml file the following command is used:

elbe create --directory /scratch/example example.xml

The project-directory must not exist before calling this command. It will contain several scripts, files and a Makefile, which controls the creation of the root-filesystem.

Creation of build system

Now change to the project directory and run

make

This will start the debian installer in the virtual machine, which will install the build system according to the xml file description. It also generates the archive nfsroot.tar.gz with a copy of the buildimage.

Note

This takes a while.

Working inside the virtual machine

After successful installation, the virtual machine can be started with:

make run

or without graphical terminal with:

make run-con

Changing the subset that is extracted as the root filesystem

Elbe has several methods to select the subset that is packaged as the root-filesystem.

The finetuning section allows to remove, copy or move files before the archive or image is generated.
The norecommend tag.
The initial copy has several modes, which allow to extract very small subsets.
The embedded archive.

Finetuning

The finetuning section allows to copy, move and delete files in the target root-filesystem. Additionally it is possible to run commands. Here is an example finetuning section:

  <finetuning>
    <rm>/usr/share/doc</rm>
    <mv path="/var">/var_ro</mv>
    <cp path=/copy/me>/my/name/on/target</mv>
  </finetuning>

Note

The copy, mv, and rm commands operate on full directories.

Advanced Copy

To copy files from the buildimage into the target image, the <command> tag can be used. The current directory is the target.

For example to copy /etc/passwd from the buildenvironment into the target, the following command can be used:

<command>cp /etc/passwd etc/ </command>

Useful directories to trim with finetuning

This section provides some useful directories that can safely be removed, and which generate big space savings:

<finetuning>
        <rm>/usr/share/doc</rm>                         (1)
        <rm>var/cache/apt/archives/*</rm>               (2)
        <rm>var/cache/apt/pkgcache.bin</rm>
        <rm>var/cache/apt/srcpkgcache.bin</rm>
        <rm>var/lib/apt/lists/*_Release</rm>
        <rm>var/lib/apt/lists/*_Packages</rm>
        <rm>var/lib/apt/lists/*_Sources</rm>

        <rm>boot</rm>                                   (3)

        <rm>lib/modules/2.6.32-5-versatile/</rm>        (4)
        <rm>var/cache/man/*</rm>                        (5)
        <rm>opt/elbe</rm>                               (6)
        <rm>var/cache/debconf/*</rm>                    (7)

</finetuning>

(1)	The doc file are not necessary.
(2)	The apt cache can be downloaded, when necessary.
(3)	The boot directory contains the kernel used for the VM. On embedded targets this is generally loaded through u-boot.
(4)	The kernel modules for the standard debian kernel.
(5)	The man page cache
(6)	The full copy mode, will also copy elbe onto the root-filesystem.
(7)	debconf cache is also not necessary

Slimming the root filesystem with the different modes

The copying process has several modes. The mode is configured in the target tag. It needs to be the tag before finetuning.

The following commented example illustrates where the mode is configured.

  <target>
    <hostname>example</hostname>
    <domain>example.com</domain>
    <passwd>foo</passwd>
    <package>
            <tar>nfsroot.tar.gz</tar>
    </package>

    <diet />        (1)

    <norecommend /> (2)

    <finetuning \>
    <pkg-list>
            <pkg>bash</pkg>
    </pkg-list>

  </target>

(1)	The mode is configured at this place, leaving it out, enables the default mode.
(2)	norecommend should be placed here.

norecommend

norecommend disables installation of recommended packages. This is a frequent cause for big root-filesystems. Installed programs will still work, but some functionality requiring external programs might be disabled.

Note

This is not strictly a mode as described in the following paragraphs. It can be combined with any of them, and the following modes are mutually exclusive.

default

The default mode generates a full copy of the build image. This mode is the easiest to use, but its not possible to generate images which have the debian package management removed.

setsel

The setsel mode can be used to generate images which only contain dpkg, and offers a more fine-grained control on which packages are installed.

The recommended usage is as follows:

Generate an image in the default mode.
Run the image and use aptitude to purge unwanted packages.
Maybe even use dpkg to remove apt and aptitude.
Then generate the list of selected Packages using dpkg --get-selections > selections.list
Transfer this file to the host System.
Use elbe setsel <xmlfile> selections.list to import the pkg-list into the xml file.
Rebuild using setsel mode.

How it works

The setsel mode works by feeding the pkg list to dpkg --set-selections in the target image copy. It has the advantage that we do not have to cope with some unregistered configuration files.

diet

Diet Mode only copies the files that are referenced in the Package management. It resolves the dependencies so that one does not need to reference library packages.

But

Some packages rely on files generated in the post-inst scripts, which are not tracked by the package management. Work is in progress to execute the post-inst scripts in the target copy, but we are still facing some problems with corner-cases, when dependencies of these scripts get removed in the finetuning.

This also holds for the tighten mode.

tighten

Tighten mode only extracts the files referenced by the packages in pkg-list. No dependencies are resolved. This mode is intended for compatibility with old xml files, do not use in new elbe projects.

XML Reference

This section is a step by step rundown of the arm example.

The xml file starts with the following header, which should always be the same:

<ns0:RootFileSystem xmlns:ns0="https://www.linutronix.de/projects/Elbe"
     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
     created="2009-05-20T08:50:56" revision="4"
     xsi:schemaLocation="https://www.linutronix.de/projects/Elbe dbsfed.xsd">

After this Header follows the project description.

        <project>
                <name>ARMexample</name>
                <version>08.15</version>
                <mirror>
                        <primary_host>debian.tu-bs.de</primary_host>    (1)
                        <primary_path>/debian</primary_path>
                        <primary_proto>http</primary_proto>
                        <url-list>                                      (2)
                                <url>
                                        <binary>http://192.168.1.2/custom/pkgs ./</binary>
                                </url>
                        </url-list>

                </mirror>
                <noauth />                                              (3)
                <suite>squeeze</suite>                                  (4)

(1)	The mirror tag contains primary_host, primary_path and primary_proto. It describes the debian mirror used.
(2)	The url-list can contain additional binary package sources.
(3)	The noauth tag can be used to disable authentication, when custom unsigned packages, are supposed to be installed.
(4)	The suite also controls which kernel and initrd is downloaded with the elbe dl_kernel` command. It also selects the distribution codename used from the primary mirror.

Note

We did not close the project tag yet.

The following section describes the virtual machine in which the debian installer will run, and where we want to build our custom packages in.

                <buildimage>
                        <arch>armel</arch>                              (1)
                        <size>20G</size>                                (2)
                        <mem>256</mem>                                  (3)
                        <interpreter>qemu-system-arm</interpreter>      (4)
                        <console>ttyAMA0,115200n1</console>             (5)
                        <machine>versatilepb</machine>                  (6)
                        <NIC>
                                <model>smc91c111</model>
                                <MAC>de:ad:be:ef:be:05</MAC>
                        </NIC>
                        <portforwarding>                                (7)
                                <forward>
                                        <proto>tcp</proto>
                                        <buildenv>22</buildenv>
                                        <host>5022</host>
                                </forward>
                        </portforwarding>
                        <pkg-list>                                      (8)
                        </pkg-list>
                </buildimage>
        </project>

(1)	arch is the debian architecture of the target.
(2)	size is the size of the hard-disk image.
(3)	mem controls the amount of RAM that is allocated to the virtual machine.
(4)	The interpreter is either qemu-system-<arch> or qemu-kvm. Usage of kvm is usually only possible, when the target is x86.
(5)	The console line needs special attention, because it is different on different emulation targets.
(6)	The machine tag contains the -machine parameter, that is provided to qemu.
(7)	portforwarding of network server ports from the virtual machine to the host. This example forwards the ssh port to port 5022 on the host.
(8)	This is the package list of buildimage.

Note

Our advice is to only change the sizes of hard-disk and RAM, if thats necessary. The other values come correctly configured in the example files.

We provide examples for arm, powerpc and x86.

        <target>
                <hostname>myARM</hostname>                      (1)
                <domain>tec.linutronix.de</domain>              (2)
                <passwd>foo</passwd>                            (3)
                <console>ttyS0,115200</console>
                <package>
                        <tar>
                                <name>nfsroot.tar.gz</name>     (4)
                        </tar>
                </package>
                <finetuning>                                    (5)
                </finetuning>
                <pkg-list>                                      (6)
                        <pkg>build-essential</pkg>
                        <pkg>bash</pkg>
                        <pkg>less</pkg>
                        <pkg>git</pkg>
                        <pkg>debhelper</pkg>
                        <pkg>nfs-common</pkg>
                        <pkg>openssh-server</pkg>
                </pkg-list>
        </target>

(1)	The hostname
(2)	and domainname
(3)	This is the root password of the machine.
(4)	This describes, that the resulting rootfilesystem, shall be generated as nfsroot.tar.gz
(5)	Empty finetuning section. Format of this section was already explained above.
(6)	The Packages list resides here.

Building ubi images

Elbe also has the ability to generate ubi images, including different partitions and mountpoints. Lets look at an example target section.

<target>
        <hostname>myARM</hostname>
        <domain>tec.linutronix.de</domain>
        <passwd>foo</passwd>
        <console>ttyS0,115200</console>

        <images>
                <mtd>
                        <name>linux.img</name>                  (1)
                        <nr>0</nr>
                        <size>60MB</size>
                        <ubivg>
                                <label>nand</label>
                                <miniosize>2048</miniosize>     (2)
                                <maxlogicaleraseblockcount>1533</maxlogicaleraseblockcount>
                                <logicaleraseblocksize>126976</logicaleraseblocksize>
                                <physicaleraseblocksize>128KiB</physicaleraseblocksize>
                                <ubi>                           (3)
                                        <type>static</type>
                                        <label>kernel</label>
                                        <id>0</id>
                                        <size>4MiB</size>
                                        <binary>/boot/vmlinuz-2.6.33.9-rt31</binary>
                                </ubi>
                                <ubi>
                                        <type>dynamic</type>
                                        <label>rfs</label>
                                        <id>1</id>
                                        <size>26MiB</size>
                                </ubi>
                                <ubi>
                                        <type>dynamic</type>
                                        <label>data</label>
                                        <id>2</id>
                                        <size>30MiB</size>
                                </ubi>
                        </ubivg>
                </mtd>
        </images>

        <fstab>                                                 (4)
                <bylabel>                                       (5)
                        <label>data</label>
                        <mountpoint>/opt</mountpoint>
                        <fs>
                                <type>ubifs</type>
                                <mkfs>-x lzo</mkfs>
                        </fs>
                        <options>rw</options>
                </bylabel>
                <bylabel>
                        <label>rfs</label>
                        <mountpoint>/</mountpoint>
                        <fs>
                                <type>ubifs</type>
                                <mkfs>-x lzo</mkfs>
                        </fs>
                        <options>ro</options>
                </bylabel>
                <bydev>                                         (6)

'''proc''' <mountpoint>/proc</mountpoint> <fs> <type>proc</type> </fs> </bydev> <bydev> '''sysfs''' <mountpoint>/sys</mountpoint> <fs> <type>sysfs</type> </fs> </bydev> <bydev> '''tmpfs''' <mountpoint>/tmp</mountpoint> <fs> <type>tmpfs</type> </fs> <options>size=2M</options> </bydev> <bydev> '''tmpfs''' <mountpoint>/var/log</mountpoint> <fs> <type>tmpfs</type> </fs> <options>size=4M</options> </bydev> <bydev> '''tmpfs'''

                        <mountpoint>/var/run</mountpoint>
                        <fs>
                                <type>tmpfs</type>
                        </fs>
                        <options>size=2M</options>
                </bydev>
        </fstab>

        <finetuning>
        </finetuning>
        <pkg-list>
                <pkg>dash</pkg>
        </pkg-list>
</target>

(1)	This specifies an mtd image with 60MB size whose filename is linux.img
(2)	Parameters for the ubi tools, describing the NAND geometry.
(3)	Specification of ubi volumes.
(4)	Because we are dealing with a root-filesystem split into more than one partition, we need to specify the fstab, so that everything can be copied into the right place.
(5)	Normal partition entries are by label.
(6)	Since we now create the target fstab ourselves, we also need to include the entries for /proc, /sys etc. These can be generated with bydev nodes.

@@ Line 1: / Line 1: @@
 <div id="header">
-=Embedded Linux Build Environment (elbe)=
+The Embedded Linux Build Environment (elbe) is a Debian based System to generate root-filesystems for embedded devices.
-Debian based System to generate root-filesystems for embedded devices.
+__TOC__
-==General Notes==
+== General Notes ==
 Generally root-filesystem creation faces the following requirements:
@@ Line 27: / Line 27: @@
 * Updates, addition or package removal is done via debians package-management (apt), which also solves all the dependency problems.
-==Installation==
+== Installation ==
 Elbe is shipped as debian package. This package will pull the necessary dependencies.
@@ Line 35: / Line 35: @@
   <tt>aptitude install elbe</tt>
-==Overview==
+== Overview ==
 The Elbe system consists of the Program <tt>elbe</tt>, which is completely implemented in Python. Similar to git, it can be called with several sub commands. For example:
@@ Line 68: / Line 68: @@
-===Example XML Files===
+=== Example XML Files ===
 A root-filesystem-project is described via an xml file.
@@ Line 150: / Line 150: @@
 The project-directory must not exist before calling this command. It will contain several scripts, files and a Makefile, which controls the creation of the root-filesystem.
-===Creation of build system===
+=== Creation of build system ===
 <div class="paragraph">
@@ Line 170: / Line 170: @@
 </div></div></div></div><div class="sect2">
-===Working inside the virtual machine===
+=== Working inside the virtual machine ===
 <div class="paragraph">
@@ Line 190: / Line 190: @@
 </div></div></div></div></div><div class="sect1">
-==Changing the subset that is extracted as the root filesystem==
+== Changing the subset that is extracted as the root filesystem ==
 <div class="sectionbody"><div class="paragraph">
@@ Line 205: / Line 205: @@
 </div><div class="sect2">
-===Finetuning===
+=== Finetuning ===
 <div class="paragraph">
@@ Line 237: / Line 237: @@
 </div></div></div></div><div class="sect2">
-===Useful directories to trim with finetuning===
+=== Useful directories to trim with finetuning ===
 <div class="paragraph">

ELBE Overview: Difference between revisions

Revision as of 15:03, 24 September 2012

Contents

General Notes

Installation

Overview

Example XML Files

Creation of build system

Working inside the virtual machine

Changing the subset that is extracted as the root filesystem

Finetuning

Useful directories to trim with finetuning

Archive

Slimming the root filesystem with the different modes

norecommend

default

setsel

diet

tighten

XML Reference

Building ubi images

Navigation menu

Page actions

Page actions

Personal tools

Navigation

Search

Tools