COM iMX6 WinCE

WEC7 Tools

CE Remote Display Application

The Remote Display allows to operate the target device's Win CE desktop from a Windows PC. It requires a USB ActiveSync connection.

Download X86 remote display application (over ActiveSync connection)

Usage

1. Extract the zip file on your PC.

2. Wait for the ActiveSync connection to be ready.

3. Start ASRDisp.exe.

Binary BSP user guide

1. Download binary BSP (Please have a look at the iMX6 Downloads section.).

2. Unzip the files to any folder on your PC.

3. Call link-DHCOM_iMX6_BIN_GEN.bat file in the folder ...\DHCOM_iMX6_BSP_BIN\, to generate symbolic links in the \WINCE700\ folder.

4. Start Visual Studio 2008 with WEC7 platform builder.

5. Open platform builder project DHCOM_iMX6.pbxml at location C:\WINCE700\OSDesigns\DHCOM_iMX6_WEC7\.

6. Select retail build.

7. Call build --> rebuild solution to build the WEC7 image.

8. After the image build has completed successfully, the nk.nb0 image is stored at location C:\WINCE700\OSDesigns\DHCOM_iMX6_WEC7\RelDir\_1_Retail_DHCOM_iMX6_ARMV7\.

9. Copy the new nk.nb0 to your mircoSD card and restart the system.

Note: To delete the symbolic links (see 3.) please call unlink-DHCOM_iMX6_BIN_GEN.bat file in the folder ...\DHCOM_iMX6_BSP_BIN\

WEC7 / WEC2013 DHHalLib (function library)

The DHHalLib provides hardware related functions for Windows Embedded CE 6 and Windows Embedded Compact 7. All the functionality is available from the user mode.

Version numbers

Read DHHalLib version

unsigned long DHHalLibGetVersion()

Return value: unsigned long --> version number (e.g. 0x01040001 for version 1.4.0.1)

BSP version

unsigned long BSPGetVersion()

Return value: unsigned long --> version number (e.g. 0x01040001 for version 1.4.0.1)

Note: The version number information is stored in the following registry key: [HKEY_LOCAL_MACHINE\Ident] dword:"BSPVersionNumber"

Read image version

unsigned long WinCEImageGetVersion()

Return value: unsigned long --> version number (e.g. 0x01040001 for version 1.4.0.1)

GPIO

Note: These functions can only access the DHCOM standard GPIOs. The mapping is done with the following enum.

  typedef enum DHCOM_GPIOEnum
  {
    DHCOM_GPIO_A,
    DHCOM_GPIO_B,
    DHCOM_GPIO_C,
    DHCOM_GPIO_D,
    DHCOM_GPIO_E,
    DHCOM_GPIO_F,
    DHCOM_GPIO_G,
    DHCOM_GPIO_H,
    DHCOM_GPIO_I,
    DHCOM_GPIO_J,
    DHCOM_GPIO_K,
    DHCOM_GPIO_L,
    DHCOM_GPIO_M,
    DHCOM_GPIO_N,
    DHCOM_GPIO_O,
    DHCOM_GPIO_P,
    DHCOM_GPIO_Q,
    DHCOM_GPIO_R,
    DHCOM_GPIO_S,
    DHCOM_GPIO_T,
    DHCOM_GPIO_U,
    DHCOM_GPIO_V,
    DHCOM_GPIO_W,
    DHCOM_GPIO_NOT_DEFINED
  }*pDHCOM_GPIOEnum;

  typedef enum DHCOM_GPIOISRType
  {
    DHCOM_GPIO_INTR_LOW_LEV=0,
    DHCOM_GPIO_INTR_HIGH_LEV,
    DHCOM_GPIO_INTR_RISE_EDGE,
    DHCOM_GPIO_INTR_FALL_EDGE,
    DHCOM_GPIO_INTR_BOTH_EDGE,
    DHCOM_GPIO_INTR_NONE
  }*pDHCOM_GPIOISRType;

Direction

bool GPIOSetDirection( DHCOM_GPIOEnum eGpio, bool bInOut, bool bDefaultState)

Input values:

DHCOM_GPIOEnum eGpio = DHCOM GPIO pin name

bool bInOut = GPIO direction (1 = input / 0 = output)

bool bDefaultState = Default state (0 = low / 1 = high)

Return value: bool --> true = success; false = failed

Set state

void GPIOSetPin(DHCOM_GPIOEnum eGpio, bool bState)

Input values:

DHCOM_GPIOEnum eGpio = DHCOM GPIO pin name

bool bState = pin state ( 0 = low / 1 = high)

Read state

bool GPIOGetPin(DHCOM_GPIOEnum eGpio)

Input values:

DHCOM_GPIOEnum eGpio = DHCOM GPIO pin name

Return value: bool --> 0 = low; 1 = high

Set Interrupt

bool GPIOSetInterrupt(DHCOM_GPIOEnum eGpio, DHCOM_GPIOISRType eISRType, HANDLE *hEvent, unsigned long ulTimeout)

Input values:

DHCOM_GPIOEnum eGpio = DHCOM GPIO pin name

DHCOM_GPIOISRType eISRType = DHCOM GPIO interrupt trigger level

HANDLE *hEvent = external EventHandle Pointer

unsigned long ulTimeout = Interrupt timeout

bool bState = GPIO Interrupt State

Return value: bool --> true = success; false = failed

Set Single Interrupt

bool GPIOSetSingleInterrupt(DHCOM_GPIOEnum eGpio, DHCOM_GPIOISRType eISRType, unsigned long ulTimeout)

Input values:

DHCOM_GPIOEnum eGpio = DHCOM GPIO pin name

DHCOM_GPIOISRType eISRType = DHCOM GPIO interrupt trigger level

unsigned long ulTimeout = Interrupt timeout

bool bState = GPIO Interrupt State

Return value: bool --> true = success; false = failed

Clear Interrupt

bool GPIOClearInterrupt(DHCOM_GPIOEnum eGpio)

Note: Gpio Interrupt cannot disable by Hardware.

Input values:

DHCOM_GPIOEnum eGpio = DHCOM GPIO pin name

Return value: bool --> true = success; false = failed

I2C

Note: These I2C Devices can only be set. The mapping is done with the following enum.

  typedef enum DHCOM_I2CEnum
  {
   DHCOM_I2C0=0,
   DHCOM_I2C1,
   DHCOM_I2C2,
   DHCOM_I2C3,
   DHCOM_I2C_NOT_DEFINED
  }*pDHCOM_I2CEnum;

Note: These freqencies can only be set. The mapping is done with the following enum.

  typedef enum DHCOM_I2CFREQMode
  {
   I2C_100K=0,
   I2C_400K,
   I2C_800K,I2C_1600K,
   I2C_2400K,
   I2C_3200K
  }*pDHCOM_I2CFREQMode;

Open

bool I2COpen(DHCOM_I2CEnum eI2CPort, DHCOM_I2CFREQMode eI2CFreq)

Input values:

DHCOM_I2CEnum eI2CPort = DHCOM I2C port name (e.g. DHCOM_I2C0)

DHCOM_I2CFREQMode eI2CFreq = DHCOM I2C port freqency name(e.g. I2C_100K)

Return value: bool --> true = success; false = failed

Close

void I2CClose(DHCOM_I2CEnum eI2CPort)

Input values:

DHCOM_I2CEnum eI2CPort = DHCOM I2C port name (e.g. DHCOM_I2C0)

Read

bool I2CRead(DHCOM_I2CEnum eI2CPort, DHCOM_I2CFREQMode eI2CFreq, unsigned char cDevId, unsigned char cI2CReg, unsigned char *pOutBuffer)

Input values:

DHCOM_I2CEnum eI2CPort = DHCOM I2C port name (e.g. DHCOM_I2C0)

DHCOM_I2CFREQMode eI2CFreq = DHCOM I2C port freqency name(e.g. I2C_100K)

unsigned char cDevId = I2C device address (0..127)

unsigned char cI2CReg = I2C device register address (0..255)

unsigned char *pOutBuffer = Pointer to the read byte

Return value: bool --> true = success; false = failed

Write

bool I2CWrite(DHCOM_I2CEnum eI2CPort, DHCOM_I2CFREQMode eI2CFreq, unsigned char cDevId, unsigned char cI2CReg, unsigned char cValue)

Input values:

DHCOM_I2CEnum eI2CPort = DHCOM I2C port name (e.g. DHCOM_I2C0)

DHCOM_I2CFREQMode eI2CFreq = DHCOM I2C port freqency name(e.g. I2C_100K)

unsigned char cDevId = I2C device address (0..127)

unsigned char cI2CReg = I2C device register address (0..255)

unsigned char cValue = Value to be written

Return value: bool --> true = success; false = failed

Read multiple bytes

bool I2CReadMultipleBytes(DHCOM_I2CEnum eI2CPort, DHCOM_I2CFREQMode eI2CFreq, unsigned char cDevId, unsigned char cI2CReg, unsigned char cBytes, unsigned char *pOutBuffer)

Input values:

DHCOM_I2CEnum eI2CPort = DHCOM I2C port name (e.g. DHCOM_I2C0)

DHCOM_I2CFREQMode eI2CFreq = DHCOM I2C port freqency name(e.g. I2C_100K)

unsigned char cDevId = I2C device address (0..127)

unsigned char cI2CReg = I2C device register address (0..255)

unsigned char cBytes = Number of bytes to be read (max. 255)

unsigned char *pOutBuffer = Pointer to the read buffer

Return value: bool --> true = success; false = failed

Write multiple bytes

bool I2CWriteMultipleBytes(DHCOM_I2CEnum eI2CPort, DHCOM_I2CFREQMode eI2CFreq, unsigned char cDevId, unsigned char cI2CReg, unsigned char cBytes, unsigned char *pInBuffer)

Input values:

DHCOM_I2CEnum eI2CPort = DHCOM I2C port name (e.g. DHCOM_I2C0)

DHCOM_I2CFREQMode eI2CFreq = DHCOM I2C port freqency name(e.g. I2C_100K)

unsigned char cDevId = I2C device address (0..127)

unsigned char cI2CReg = I2C device register address (0..255)

unsigned char cBytes = Number of bytes to be read (max. 255)

unsigned char *pInBuffer = Pointer to the input buffer

Return value: bool --> true = success; false = failed

SPI

Note: These SPI Devices can only be set. The mapping is done with the following enum.

  typedef enum DHCOM_SPIEnum
  {
       DHCOM_SPI1=0,
       DHCOM_SPI2,
       DHCOM_SPI_NOT_DEFINED
  }*pDHCOM_SPIEnum;

Note: These chip selects can be set. The mapping is done with the following enum.

   typedef enum DHCOM_SPIModeEnum
   {
       SPI_CS0=0,
       SPI_CS1,
       SPI_CS2,
       SPI_CS3
   }*pDHCOM_SPIModeEnum;

Open

bool SPIOpen(DHCOM_SPIEnum eSPIPort, DHCOM_SPIModeEnum eSPIMode, unsigned int iSPIFreq)

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

DHCOM_SPIModeEnum eSPIMode = DHCOM SPI mode name(e.g. DHCOM_CS0)

unsigned int iSPIFreq = DHCOM SPI frequency (e.g. 16MHz = 16000000)

Return value: bool --> true = success; false = failed

Close

void SPIClose(DHCOM_SPIEnum eSPIPort)

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

Read

bool SPIRead(DHCOM_SPIEnum eSPIPort, unsigned int *pOutBuffer)

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

unsigned int *pOutBuffer = Pointer to the output buffer

Return value: bool --> true = success; false = failed

Write

bool SPIWrite(DHCOM_SPIEnum eSPIPort, unsigned int *pInBuffer, unsigned int *pOutBuffer, bool bLoopback)

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

unsigned int *pInBuffer = Pointer to the input buffer

unsigned int *pOutBuffer = Pointer to the output buffer (If not Loopback used = NULL)

bool bLoopback = Enable/Disable Loopback transmission

Return value: bool --> true = success; false = failed

Read multiple bytes

bool SPIReadMultiple(DHCOM_SPIEnum eSPIPort, unsigned int iWCount, unsigned int *pOutBuffer)

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

unsigned int iWCount = Number of bytes to read (max. 1024 Bytes)

unsigned int *pOutBuffer = Pointer to the output buffer

Return value: bool --> true = success; false = failed

Write multiple bytes

bool SPIWriteMultiple(DHCOM_SPIEnum eSPIPort, unsigned int *pOutBuffer, unsigned int iWCount)

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

unsigned int *pOutBuffer = Pointer to the output buffer

Return value: bool --> true = success; false = failed

Read bytes from NOR Flash

bool SPIReadNORFlash(DHCOM_SPIEnum eSPIPort, unsigned int iSPIReg, unsigned int iWCount, unsigned int *pOutBuffer)

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

unsigned int iSPIReg = SPI NOR Flash Start Address (0..65565)

unsigned int iWCount = Number of bytes to read (max. 1024 Bytes)

unsigned int *pOutBuffer = Pointer to the output buffer

Return value: bool --> true = success; false = failed

Write bytes to NOR Flash

bool SPIWriteNORFlash(DHCOM_SPIEnum eSPIPort, unsigned int iSPIReg, unsigned int *pOutBuffer, unsigned int iWCount)

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

unsigned int iSPIReg = SPI NOR Flash Start Address (0..65565)

unsigned int *pOutBuffer = Pointer to the output buffer

Return value: bool --> true = success; false = failed

UART

(Note: Currently available for WEC 2013)

Note: These UART Devices can only be set. The mapping is done with the following enum.

  typedef enum DHCOM_UARTEnum
  {
       DHCOM_UART1=1,
       DHCOM_UART2,
       DHCOM_UART3
  }*pDHCOM_UARTEnum;

Note: These mode selects can be set. The mapping is done with the following enum.

   typedef enum DHCOM_UARTModeEnum
   {
       DHCOM_HSHAKE_OFF=1,
       DHCOM_HSHAKE_SOFTWARE,
       DHCOM_HSHAKE_HARDWARE
   }*pDHCOM_UARTModeEnum;

Note: These parity selects can be set. The mapping is done with the following enum.

   typedef enum DHCOM_UARTParityEnum
   {
       DHCOM_NOPARITY=0,
       DHCOM_ODDPARITY,
       DHCOM_EVENPARITY,
       DHCOM_MARKPARITY,
       DHCOM_SPACEPARITY
   }*pDHCOM_UARTParityEnum;

Note: These stopbit selects can be set. The mapping is done with the following enum.

   typedef enum DHCOM_UARTStopBitEnum
   {
       DHCOM_ONESTOPBIT=0,
       DHCOM_ONE5STOPBITS,
       DHCOM_TWOSTOPBITS
   }*pDHCOM_UARTStopBitEnum;

Note: These byte size selects can be set. The mapping is done with the following enum.

   typedef enum DHCOM_UARTByteSizeEnum
   {
       DHCOM_5BIT=5,
       DHCOM_6BIT,
       DHCOM_7BIT,
       DHCOM_8BIT
   }*pDHCOM_UARTByteSizeEnum;

Note: These event selects can be set. The mapping is done with the following enum.

   typedef enum DHCOM_UARTWEvent
   {
       SIG_RX_CHAR_DETECT_Flag=1,
       SIG_RX_EVENT_DETECT_Flag=2,
       SIG_TX_BUFFER_EMPTY_Flag=4,
       SIG_CTS_CHANGED_Flag=8,
       SIG_DSR_CHANGED_Flag=16,
       SIG_RLSD_CHANGED_Flag=32,
       SIG_BREAK_DETECT_Error=64,
       SIG_LINE_STATUS_Error=128,
       SIG_RING_DETECT_Error=512
   }*pDHCOM_UARTWEvent;

Open

bool UARTOpen(DHCOM_UARTEnum eUARTPort, DHCOM_UARTModeEnum eUARTMode, unsigned long lUARTFreq)

Input values:

DHCOM_UARTEnum eUARTPort = DHCOM UART port name (e.g. DHCOM_UART1)

DHCOM_UARTModeEnum eUARTMode = DHCOM UART mode name(e.g. DHCOM_HSHAKE_OFF)

unsigned long lUARTFreq = DHCOM UART frequency (e.g. 115200 bit/s = 115200)

Return value: bool --> true = success; false = failed

Close

void UARTClose(DHCOM_UARTEnum eUARTPort)

Input values:

DHCOM_UARTEnum eUARTPort = DHCOM UART port name (e.g. DHCOM_UART1)

Configure

bool UARTConfigure(DHCOM_UARTEnum eUARTPort, DHCOM_UARTModeEnum eUARTMode, DHCOM_UARTParityEnum eUARTParity, DHCOM_UARTStopBitEnum eUARTStopBit, DHCOM_UARTByteSizeEnum eUARTByteSize, unsigned long lUARTFreq)

Input values:

DHCOM_UARTEnum eUARTPort = DHCOM UART port name (e.g. DHCOM_UART1)

DHCOM_UARTModeEnum eUARTMode = DHCOM UART mode name(e.g. DHCOM_HSHAKE_OFF)

DHCOM_UARTParityEnum eUARTParity = DHCOM UART parity name (e.g. DHCOM_NOPARITY)

DHCOM_UARTStopBitEnum eUARTStopBit = DHCOM UART stop bit name (e.g. DHCOM_ONESTOPBIT)

DHCOM_UARTByteSizeEnum eUARTByteSize = DHCOM UART byte size name (e.g. DHCOM_8BIT)

unsigned long lUARTFreq = DHCOM UART frequency (e.g. 115200 bit/s = 115200)

Return value: bool --> true = success; false = failed

Configure Timeout

bool UARTConfigureTimeout(DHCOM_UARTEnum eUARTPort, unsigned long lReadIntervalTimeout, unsigned long lReadTotalTimeoutConstant, unsigned long lReadTotalTimeoutMultiplier, unsigned long ulWriteTotalTimeoutConstant, unsigned long ulWriteTotalTimeoutMultiplier)

Input values:

DHCOM_UARTEnum eUARTPort = DHCOM UART port name (e.g. DHCOM_UART1)

unsigned long lReadIntervalTimeout = Read interval timeout

unsigned long lReadTotalTimeoutConstant = Read total timeout

unsigned long lReadTotalTimeoutMultiplier = Read total timeout multiplier

unsigned long ulWriteTotalTimeoutConstant = Write total timeout

unsigned long ulWriteTotalTimeoutMultiplier = Write total timeout multiplier

Return value: bool --> true = success; false = failed

Clear buffer

bool UARTClearBuffer(DHCOM_UARTEnum eUARTPort)

Input values:

DHCOM_UARTEnum eUARTPort = DHCOM UART port name (e.g. DHCOM_UART1)

Read

bool UARTRead(DHCOM_UARTEnum eUARTPort, int iDataLength, unsigned char *pInBuffer)

Input values:

DHCOM_UARTEnum eUARTPort = DHCOM UART port name (e.g. DHCOM_UART1)

int iDataLength = Read data length

unsigned char *pInBuffer = Pointer to the input buffer

Return value: bool --> true = success; false = failed

Write

bool UARTWrite(DHCOM_UARTEnum eUARTPort, unsigned char *pOutBuffer)

Input values:

DHCOM_UARTEnum eUARTPort = DHCOM UART port name (e.g. DHCOM_UART1)

unsigned char *pOutBuffer = Pointer to the output buffer

Return value: bool --> true = success; false = failed

CAN

(Note: Currently available for WEC 2013)

Note: These CAN Devices can only be set. The mapping is done with the following enum.

  typedef enum DHCOM_CANEnum
  {
       DHCOM_CAN1=1,
       DHCOM_CAN_NOT_DEFINED
  }*pDHCOM_CANEnum;

Note: These mode selects can be set. The mapping is done with the following enum.

   typedef enum DHCOM_CANModeEnum
   {
       DHCOM_CAN_STANDARD=0,
       DHCOM_CAN_EXTENDED
   }*pDHCOM_CANModeEnum;

Note: These frame selects can be set. The mapping is done with the following enum.

   typedef enum DHCOM_CANFrameEnum
   {
       DHCOM_CAN_DATA=0,
       DHCOM_CAN_REMOTE
   }*pDHCOM_CANFrameEnum;

Open

bool CANOpen(DHCOM_CANEnum eCANPort, DHCOM_CANModeEnum eCANMode)

Input values:

DHCOM_CANEnum eCANPort = DHCOM CAN port name (e.g. DHCOM_CAN1)

DHCOM_CANModeEnum eCANMode = DHCOM CAN mode name(e.g. DHCOM_CAN_STANDARD)

Return value: bool --> true = success; false = failed

Close

void CANClose(DHCOM_CANEnum eCANPort)

Input values:

DHCOM_CANEnum eCANPort = DHCOM CAN port name (e.g. DHCOM_CAN1)

Configure

bool CANConfigureMode(DHCOM_CANEnum eCANPort, DHCOM_CANModeEnum eCANMode, unsigned long lCANBitrate = 0, bool bCANTLPrio = false, bool bCANLoopback = false)

Input values:

DHCOM_CANEnum eCANPort = DHCOM CAN port name (e.g. DHCOM_CAN1)

DHCOM_CANModeEnum eCANMode = DHCOM CAN mode name(e.g. DHCOM_CAN_STANDARD)

unsigned long lCANBitrate = DHCOM UART frequency (e.g. 500000 bit/s = 500kbit)

bool bCANTLPrio = DHCOM CAN transmit local prio (e.g. false = disabled)

bool bCANLoopback = DHCOM CAN loopback mode (e.g. false = disabled)

Return value: bool --> true = success; false = failed

Configure Timing

bool CANConfigureTimimg(DHCOM_CANEnum eCANPort, unsigned long lPrescaler, unsigned char cPropSeg, unsigned char cPhase1Seg, unsigned char cPhase2Seg, unsigned char RJW)

Input values:

DHCOM_CANEnum eCANPort = DHCOM CAN port name (e.g. DHCOM_CAN1)

unsigned long lPrescaler = Prescaler value

unsigned char cPropSeg = Property segmentation time value

unsigned char cPhase1Seg = Phase 1 segmentation time value

unsigned char cPhase2Seg = Phase 2 segmentation time value

unsigned char RJW = Request jump time value

Return value: bool --> true = success; false = failed

Configure Filter

bool CANConfigureFilter(DHCOM_CANEnum eCANPort, int iFilterID, int iFilterIDMask, bool bFilterFormat, bool bFilterRemote)

Input values:

DHCOM_CANEnum eCANPort = DHCOM CAN port name (e.g. DHCOM_CAN1)

int iFilterID = Filter ID value

int iFilterIDMask = Filter ID Mask value

bool bFilterFormat = Filter format (e.g. false = disabled)

bool bFilterRemote = Filter remote frame (e.g. false = disabled)

Return value: bool --> true = success; false = failed

Remove Filter

bool CANResetFilter(DHCOM_CANEnum eCANPort)

Input values:

DHCOM_CANEnum eCANPort = DHCOM CAN port name (e.g. DHCOM_CAN1)

Return value: bool --> true = success; false = failed

Configure Message

bool CANConfigureMessage(DHCOM_CANEnum eCANPort, DHCOM_CANFrameEnum eCANFrame, int iCANMsgID, unsigned char cCANMsgPrio, unsigned long lCANMsgTimeout, bool bTXAbort)

Input values:

DHCOM_CANEnum eCANPort = DHCOM CAN port name (e.g. DHCOM_CAN1)

DHCOM_CANFrameEnum eCANFrame = DHCOM CAN frame name (e.g. DHCOM_CAN_DATA)

int iCANMsgID = CAN Message identification number (e.g. 0x2)

unsigned char cCANMsgPrio = CAN Message priority (e.g. 1)

unsigned long lCANMsgTimeout = CAN Message timeout (e.g. 1000 = 1 sec)

bool bTXAbort = CAN Message timeout enable (e.g. false = disabled)

Return value: bool --> true = success; false = failed

Get Message Header

bool CANGetMessageParameter(DHCOM_CANEnum eCANPort, int *iCANMsgID, int *iCANMsgLength, int *iCANFrame, unsigned char *cCANMsgPrio, unsigned long *lCANMsgTimeout, int *iTXAbort)

Input values:

DHCOM_CANEnum eCANPort = DHCOM CAN port name (e.g. DHCOM_CAN1)

int *iCANMsgID = Pointer to Message identification value

int *iCANMsgLength = Pointer to Message length value

int *iCANFrame = Pointer to Message frame value

unsigned char *cCANMsgPrio = Pointer to Message priority value

unsigned long *lCANMsgTimeout = Pointer to Message timeout value

int *iTXAbort = Pointer to Message TX abort value

Return value: bool --> true = success; false = failed

Read

bool CANRead(DHCOM_CANEnum eCANPort, unsigned char *pInBuffer, int iDataLength)

Input values:

DHCOM_CANEnum eCANPort = DHCOM CAN port name (e.g. DHCOM_CAN1)

unsigned char *pInBuffer = Pointer to the input buffer

int iDataLength = Read data length

Return value: bool --> true = success; false = failed

Write

bool CANWrite(DHCOM_CANEnum eCANPort, unsigned char *pOutBuffer, int iDataLength = 8)

Input values:

DHCOM_CANEnum eCANPort = DHCOM CAN port name (e.g. DHCOM_CAN1)

unsigned char *pOutBuffer = Pointer to the output buffer

int iDataLength = Write data length

Return value: bool --> true = success; false = failed

Physical Memory

Note: These freqencies can only be set. The mapping is done with the following enum.

   typedef enum DHCOM_PHYEnum
   {
       DHCOM_PHY1=1,
       DHCOM_PHY2,
       DHCOM_PHY3,
       DHCOM_PHY4,
       DHCOM_PHY5,
       DHCOM_PHY6,
       DHCOM_PHY7,
       DHCOM_PHY8,
       DHCOM_PHY9
   }*pDHCOM_PHYEnum;

Write Physical Address

int WritePhysicalAddress(DHCOM_PHYEnum PHYDev, unsigned long ulPhyAddr, unsigned char cRegSize, int iValue, bool bReadBack)

Input values:

DHCOM_PHYEnum PHYDev = DHCOM PHY Device name (e.g. DHCOM_PHY1)

unsigned long ulPhyAddr = Physical Address to write (e.g. GPIO1_MASK_REG = 0x209c014)

unsigned char cRegSize = Register Size (8 = 8bit, 16 = 16bit, 32 = 32bit)

int iValue = Value for Physical Address to write

bool bReadBack = Enable/Disable Readback function (enable = true -> disable = false)

Return value: int --> returns the written value from the specified Physical Address

if bReadBack == TRUE, else 0x0 will be returned

Read Physical Address

int ReadPhysicalAddress(DHCOM_PHYEnum PHYDev, unsigned long ulPhyAddr, unsigned char cRegSize)

Input values:

DHCOM_PHYEnum PHYDev = DHCOM PHY Device name (e.g. DHCOM_PHY1)

unsigned long ulPhyAddr = Physical Address to write (e.g. GPIO1_MASK_REG = 0x209c014)

unsigned char cRegSize = Register Size (8 = 8bit, 16 = 16bit, 32 = 32bit)

Return value: int --> returns the value from the specified Physical Address

KITL

Restart

bool RestartPowerKITL()

Input values:

Return value: bool --> true = success; false = failed

Control

bool ControlPowerKITL(bool bEnable)

Input values:

bool bEnable = Enable/Disable KITL Connection

Return value: bool --> true = success; false = failed

Backlight

Backlight Level

bool SetBacklightLevel(int Level)

Note: In DHHalLib Version 1.0.0.0 only Backlight Enable/Disable available. (Value 0 = Disable, Value 1 to 255 = Enable)

Input values:

int Level = Backlight Level (0 ... 255)

Return value: bool --> true = success; false = failed

Backlight Timeout

bool SetBacklightSuspend(int Timeout, bool bEnable)

Note: In DHHalLib Version 1.0.0.0 not available.

Input values:

int Timeout = Timeout for Backlight (seconds)

bool bEnable = Enable/Disable Timeout Backlight --> true = On; false = Off

Return value: bool --> true = success; false = failed

Touch screen

Calibrate touch

bool CalibrateTouch()

Return value: bool --> true = success; false = failed

Clear calibration data

bool ClearTouchCalibrationData()

Description:

This function delete the registry entry [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH] dword:"TouchCalibrationDone" . For saving the value permanent please call SaveRegistry() afterwards.

Return value: bool --> true = success; false = failed

Registry

Save HIVE registry

bool SaveRegistry()

Return value: bool --> true = success; false = failed

Create backup

bool CreateRegistryBackup()

Description:

This function generates the files ave_HKLM_Reg.srg and Save_HKLCU_Reg.srg in the folder \Storage Card\. These files can be used at a later time to restore the registry.

Return value: bool --> true = success; false = failed

Restore backup

bool RestoreRegistryBackup()

Description:

This function restores the registry from the files Save_HKLM_Reg.srg and Save_HKLCU_Reg.srg in the folder \Storage Card\. Afterwards a restart is carried out automatically. If the backup files are not present, then the function returns the return value flase.

Return value: bool --> true = this never happens because a soft reset is performed; false = failed

Watchdog & Reset

Soft reset

void SoftReset()

WEC7 / WEC2013 DHHalLib C# Wrapper (function wrapper)

The DHHalLib C# wrapper provides hardware related functions for Windows Embedded CE 6 and Windows Embedded Compact 7. All the functionality is available from the user mode.

Version numbers

Read DHHalLib version

UInt32 DHHalLibGetVersion()

Return value: UInt32 --> version number (e.g. 0x01040001 for version 1.4.0.1)

BSP version

UInt32 BSPGetVersion()

Return value: UInt32 --> version number (e.g. 0x01040001 for version 1.4.0.1)

Note: The version number information is stored in the following registry key: [HKEY_LOCAL_MACHINE\Ident] dword:"BSPVersionNumber"

Read image version

UInt32 WinCEImageGetVersion()

Return value: UInt32 --> version number (e.g. 0x01040001 for version 1.4.0.1)

GPIO

Note: These functions can only access the DHCOM standard GPIOs. The mapping is done with the following enum.

  public enum DHCOM_GPIOEnum
  {
    DHCOM_GPIO_A,
    DHCOM_GPIO_B,
    DHCOM_GPIO_C,
    DHCOM_GPIO_D,
    DHCOM_GPIO_E,
    DHCOM_GPIO_F,
    DHCOM_GPIO_G,
    DHCOM_GPIO_H,
    DHCOM_GPIO_I,
    DHCOM_GPIO_J,
    DHCOM_GPIO_K,
    DHCOM_GPIO_L,
    DHCOM_GPIO_M,
    DHCOM_GPIO_N,
    DHCOM_GPIO_O,
    DHCOM_GPIO_P,
    DHCOM_GPIO_Q,
    DHCOM_GPIO_R,
    DHCOM_GPIO_S,
    DHCOM_GPIO_T,
    DHCOM_GPIO_U,
    DHCOM_GPIO_V,
    DHCOM_GPIO_W,
    DHCOM_GPIO_NOT_DEFINED
  };

  public enum DHCOM_GPIOISRType
  {
    DHCOM_GPIO_INTR_LOW_LEV=0,
    DHCOM_GPIO_INTR_HIGH_LEV,
    DHCOM_GPIO_INTR_RISE_EDGE,
    DHCOM_GPIO_INTR_FALL_EDGE,
    DHCOM_GPIO_INTR_BOTH_EDGE,
    DHCOM_GPIO_INTR_NONE
  };

Direction

bool GPIOSetDirection( DHCOM_GPIOEnum eGpio, bool bInOut, bool bDefaultState)

Input values:

DHCOM_GPIOEnum eGpio = DHCOM GPIO pin name

bool bInOut = GPIO direction (1 = input / 0 = output)

bool bDefaultState = Default state (0 = low / 1 = high)

Return value: bool --> true = success; false = failed

Set state

void GPIOSetPin(DHCOM_GPIOEnum eGpio, bool bState)

Input values:

DHCOM_GPIOEnum eGpio = DHCOM GPIO pin name

bool bState = pin state ( 0 = low / 1 = high)

Read state

bool GPIOGetPin(DHCOM_GPIOEnum eGpio)

Input values:

DHCOM_GPIOEnum eGpio = DHCOM GPIO pin name

Return value: bool --> 0 = low; 1 = high

Set Interrupt

bool GPIOSetInterrupt(DHCOM_GPIOEnum eGpio, DHCOM_GPIOISRType eISRType, IntPtr hEvent, ulong ulTimeout)

Input values:

DHCOM_GPIOEnum eGpio = DHCOM GPIO pin name

DHCOM_GPIOISRType eISRType = DHCOM GPIO interrupt trigger level

IntPtr hEvent = external EventHandle Pointer

ulong ulTimeout = Interrupt timeout

bool bState = GPIO Interrupt State

Return value: bool --> true = success; false = failed

Set Single Interrupt

bool GPIOSetSingleInterrupt(DHCOM_GPIOEnum eGpio, DHCOM_GPIOISRType eISRType, ulong ulTimeout)

Input values:

DHCOM_GPIOEnum eGpio = DHCOM GPIO pin name

DHCOM_GPIOISRType eISRType = DHCOM GPIO interrupt trigger level

ulong ulTimeout = Interrupt timeout

bool bState = GPIO Interrupt State

Return value: bool --> true = success; false = failed

Clear Interrupt

bool GPIOClearInterrupt(DHCOM_GPIOEnum eGpio)

Note: Gpio Interrupt cannot disable by Hardware.

Input values:

DHCOM_GPIOEnum eGpio = DHCOM GPIO pin name

Return value: bool --> true = success; false = failed

I2C

Note: These I2C Devices can only be set. The mapping is done with the following enum.

  public enum DHCOM_I2CEnum
  {
   DHCOM_I2C0=0,
   DHCOM_I2C1,
   DHCOM_I2C2,
   DHCOM_I2C3,
   DHCOM_I2C_NOT_DEFINED
  };

Note: These freqencies can only be set. The mapping is done with the following enum.

  public enum DHCOM_I2CFREQMode
  {
   I2C_100K=0,
   I2C_400K,
   I2C_800K,I2C_1600K,
   I2C_2400K,
   I2C_3200K
  };

Open

bool I2COpen(DHCOM_I2CEnum eI2CPort, DHCOM_I2CFREQMode eI2CFreq)

Input values:

DHCOM_I2CEnum eI2CPort = DHCOM I2C port name (e.g. DHCOM_I2C0)

DHCOM_I2CFREQMode eI2CFreq = DHCOM I2C port freqency name(e.g. I2C_100K)

Return value: bool --> true = success; false = failed

Close

void I2CClose(DHCOM_I2CEnum eI2CPort)

Input values:

DHCOM_I2CEnum eI2CPort = DHCOM I2C port name (e.g. DHCOM_I2C0)

Read

bool I2CRead(DHCOM_I2CEnum eI2CPort, DHCOM_I2CFREQMode eI2CFreq, byte cDevId, byte cI2CReg, byte[] pInBuffer)

Input values:

DHCOM_I2CEnum eI2CPort = DHCOM I2C port name (e.g. DHCOM_I2C0)

DHCOM_I2CFREQMode eI2CFreq = DHCOM I2C port freqency name(e.g. I2C_100K)

byte cDevId = I2C device address (0..127)

byte cI2CReg = I2C device register address (0..255)

ref byte pOutBuffer = Pointer to the read byte

Return value: bool --> true = success; false = failed

Write

bool I2CWrite(DHCOM_I2CEnum eI2CPort, DHCOM_I2CFREQMode eI2CFreq, byte cDevId, byte cI2CReg, byte cValue)

Input values:

DHCOM_I2CEnum eI2CPort = DHCOM I2C port name (e.g. DHCOM_I2C0)

DHCOM_I2CFREQMode eI2CFreq = DHCOM I2C port freqency name(e.g. I2C_100K)

byte cDevId = I2C device address (0..127)

byte cI2CReg = I2C device register address (0..255)

byte cValue = Value to be written

Return value: bool --> true = success; false = failed

Read multiple bytes

bool I2CReadMultipleBytes(DHCOM_I2CEnum eI2CPort, DHCOM_I2CFREQMode eI2CFreq, byte cDevId, byte cI2CReg, byte cBytes, byte[] pInBuffer)

Input values:

DHCOM_I2CEnum eI2CPort = DHCOM I2C port name (e.g. DHCOM_I2C0)

DHCOM_I2CFREQMode eI2CFreq = DHCOM I2C port freqency name(e.g. I2C_100K)

byte cDevId = I2C device address (0..127)

byte cI2CReg = I2C device register address (0..255)

byte cBytes = Number of bytes to be read (max. 255)

byte[] pInBuffer = Pointer to the read buffer

Return value: bool --> true = success; false = failed

Write multiple bytes

bool I2CWriteMultipleBytes(DHCOM_I2CEnum eI2CPort, DHCOM_I2CFREQMode eI2CFreq, byte cDevId, byte cI2CReg, byte cBytes, byte[] pOutBuffer)

Input values:

DHCOM_I2CEnum eI2CPort = DHCOM I2C port name (e.g. DHCOM_I2C0)

DHCOM_I2CFREQMode eI2CFreq = DHCOM I2C port freqency name(e.g. I2C_100K)

byte cDevId = I2C device address (0..127)

byte cI2CReg = I2C device register address (0..255)

byte cBytes = Number of bytes to be read (max. 255)

byte[] pOutBuffer = Pointer to the input buffer

Return value: bool --> true = success; false = failed

SPI

Note: These SPI Devices can only be set. The mapping is done with the following enum.

  public enum DHCOM_SPIEnum
  {
       DHCOM_SPI1=0,
       DHCOM_SPI2,
       DHCOM_SPI_NOT_DEFINED
  };

Note: These chip selects can be set. The mapping is done with the following enum.

   public enum DHCOM_SPIModeEnum
   {
       SPI_CS0=0,
       SPI_CS1,
       SPI_CS2,
       SPI_CS3
   };

Open

bool SPIOpen(DHCOM_SPIEnum eSPIPort, DHCOM_SPIModeEnum eSPIMode, uint iSPIFreq)

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

DHCOM_SPIModeEnum eSPIMode = DHCOM SPI mode name(e.g. DHCOM_CS0)

uint iSPIFreq = DHCOM SPI frequency (e.g. 16MHz = 16000000)

Return value: bool --> true = success; false = failed

Close

void SPIClose(DHCOM_SPIEnum eSPIPort)

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

Read

bool SPIRead(DHCOM_SPIEnum eSPIPort, uint[] pOutBuffer)

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

uint[] pOutBuffer = Pointer to the output buffer

Return value: bool --> true = success; false = failed

Write

bool SPIWrite(DHCOM_SPIEnum eSPIPort, uint[] pInBuffer, uint[] pOutBuffer, bool bLoopback)

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

uint[] pInBuffer = Pointer to the input buffer

uint[] pOutBuffer = Pointer to the output buffer (If not Loopback used = NULL)

bool bLoopback = Enable/Disable Loopback transmission

Return value: bool --> true = success; false = failed

Read multiple bytes

bool SPIReadMultiple(DHCOM_SPIEnum eSPIPort, uint iWCount, uint[] pInBuffer)

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

uint iWCount = Number of bytes to read (max. 1024 Bytes)

uint[] pOutBuffer = Pointer to the output buffer

Return value: bool --> true = success; false = failed

Write multiple bytes

bool SPIWriteMultiple(DHCOM_SPIEnum eSPIPort, uint[] pOutBuffer, uint iWCount)

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

uint[] pOutBuffer = Pointer to the output buffer

uint iWCount = Number of bytes to write (max. 1024 Bytes)

Return value: bool --> true = success; false = failed

Read bytes from NOR Flash

bool SPIReadNORFlash(DHCOM_SPIEnum eSPIPort, uint iSPIReg, uint iWCount, uint[] pInBuffer)

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

uint iSPIReg = SPI NOR Flash Start Address (0..65565)

uint iWCount = Number of bytes to read (max. 1024 Bytes)

uint[] pOutBuffer = Pointer to the output buffer

Return value: bool --> true = success; false = failed

Write bytes to NOR Flash

bool SPIWriteNORFlash(DHCOM_SPIEnum eSPIPort, uint iSPIReg, uint[] pOutBuffer, uint iWCount)

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

uint iSPIReg = SPI NOR Flash Start Address (0..65565)

uint[] pOutBuffer = Pointer to the output buffer

uint iWCount = Data length count

Return value: bool --> true = success; false = failed

UART

(Note: Currently available for WEC 2013)

Note: These UART Devices can only be set. The mapping is done with the following enum.

  public enum DHCOM_UARTEnum
  {
       DHCOM_UART1=1,
       DHCOM_UART2,
       DHCOM_UART3
  };

Note: These mode selects can be set. The mapping is done with the following enum.

   public enum DHCOM_UARTModeEnum
   {
       DHCOM_HSHAKE_OFF=1,
       DHCOM_HSHAKE_SOFTWARE,
       DHCOM_HSHAKE_HARDWARE
   };

Note: These parity selects can be set. The mapping is done with the following enum.

   public enum DHCOM_UARTParityEnum
   {
       DHCOM_NOPARITY=0,
       DHCOM_ODDPARITY,
       DHCOM_EVENPARITY,
       DHCOM_MARKPARITY,
       DHCOM_SPACEPARITY
   };

Note: These stopbit selects can be set. The mapping is done with the following enum.

   public enum DHCOM_UARTStopBitEnum
   {
       DHCOM_ONESTOPBIT=0,
       DHCOM_ONE5STOPBITS,
       DHCOM_TWOSTOPBITS
   };

Note: These byte size selects can be set. The mapping is done with the following enum.

   public enum DHCOM_UARTByteSizeEnum
   {
       DHCOM_5BIT=5,
       DHCOM_6BIT,
       DHCOM_7BIT,
       DHCOM_8BIT
   };

Note: These event selects can be set. The mapping is done with the following enum.

   public enum DHCOM_UARTWEvent
   {
       SIG_RX_CHAR_DETECT_Flag=1,
       SIG_RX_EVENT_DETECT_Flag=2,
       SIG_TX_BUFFER_EMPTY_Flag=4,
       SIG_CTS_CHANGED_Flag=8,
       SIG_DSR_CHANGED_Flag=16,
       SIG_RLSD_CHANGED_Flag=32,
       SIG_BREAK_DETECT_Error=64,
       SIG_LINE_STATUS_Error=128,
       SIG_RING_DETECT_Error=512
   };

Open

bool UARTOpen(DHCOM_UARTEnum eUARTPort, DHCOM_UARTModeEnum eUARTMode, ulong lUARTFreq)

Input values:

DHCOM_UARTEnum eUARTPort = DHCOM UART port name (e.g. DHCOM_UART1)

DHCOM_UARTModeEnum eUARTMode = DHCOM UART mode name(e.g. DHCOM_HSHAKE_OFF)

ulong lUARTFreq = DHCOM UART frequency (e.g. 115200 bit/s = 115200)

Return value: bool --> true = success; false = failed

Close

void UARTClose(DHCOM_UARTEnum eUARTPort)

Input values:

DHCOM_UARTEnum eUARTPort = DHCOM UART port name (e.g. DHCOM_UART1)

Configure

bool UARTConfigure(DHCOM_UARTEnum eUARTPort, DHCOM_UARTModeEnum eUARTMode, DHCOM_UARTParityEnum eUARTParity, DHCOM_UARTStopBitEnum eUARTStopBit, DHCOM_UARTByteSizeEnum eUARTByteSize, ulong lUARTFreq)

Input values:

DHCOM_UARTEnum eUARTPort = DHCOM UART port name (e.g. DHCOM_UART1)

DHCOM_UARTModeEnum eUARTMode = DHCOM UART mode name(e.g. DHCOM_HSHAKE_OFF)

DHCOM_UARTParityEnum eUARTParity = DHCOM UART parity name (e.g. DHCOM_NOPARITY)

DHCOM_UARTStopBitEnum eUARTStopBit = DHCOM UART stop bit name (e.g. DHCOM_ONESTOPBIT)

DHCOM_UARTByteSizeEnum eUARTByteSize = DHCOM UART byte size name (e.g. DHCOM_8BIT)

ulong lUARTFreq = DHCOM UART frequency (e.g. 115200 bit/s = 115200)

Return value: bool --> true = success; false = failed

Configure Timeout

bool UARTConfigureTimeout(DHCOM_UARTEnum eUARTPort, ulong lReadIntervalTimeout, ulong lReadTotalTimeoutConstant, ulong lReadTotalTimeoutMultiplier, ulong ulWriteTotalTimeoutConstant, ulong ulWriteTotalTimeoutMultiplier)

Input values:

DHCOM_UARTEnum eUARTPort = DHCOM UART port name (e.g. DHCOM_UART1)

ulong lReadIntervalTimeout = Read interval timeout

ulong lReadTotalTimeoutConstant = Read total timeout

ulong lReadTotalTimeoutMultiplier = Read total timeout multiplier

ulong ulWriteTotalTimeoutConstant = Write total timeout

ulong ulWriteTotalTimeoutMultiplier = Write total timeout multiplier

Return value: bool --> true = success; false = failed

Clear buffer

bool UARTClearBuffer(DHCOM_UARTEnum eUARTPort)

Input values:

DHCOM_UARTEnum eUARTPort = DHCOM UART port name (e.g. DHCOM_UART1)

Read

bool UARTRead(DHCOM_UARTEnum eUARTPort, int iDataLength, byte[] pInBuffer)

Input values:

DHCOM_UARTEnum eUARTPort = DHCOM UART port name (e.g. DHCOM_UART1)

int iDataLength = Read data length

byte[] pInBuffer = Pointer to the input buffer

Return value: bool --> true = success; false = failed

Write

bool UARTWrite(DHCOM_UARTEnum eUARTPort, byte[] pOutBuffer)

Input values:

DHCOM_UARTEnum eUARTPort = DHCOM UART port name (e.g. DHCOM_UART1)

byte[] pOutBuffer = Pointer to the output buffer

Return value: bool --> true = success; false = failed

CAN

(Note: Currently available for WEC 2013)

Note: These CAN Devices can only be set. The mapping is done with the following enum.

  public enum DHCOM_CANEnum
  {
       DHCOM_CAN1=1,
       DHCOM_CAN_NOT_DEFINED
  };

Note: These mode selects can be set. The mapping is done with the following enum.

   public enum DHCOM_CANModeEnum
   {
       DHCOM_CAN_STANDARD=0,
       DHCOM_CAN_EXTENDED
   };

Note: These frame selects can be set. The mapping is done with the following enum.

   public enum DHCOM_CANFrameEnum
   {
       DHCOM_CAN_DATA=0,
       DHCOM_CAN_REMOTE
   };

Open

bool CANOpen(DHCOM_CANEnum eCANPort, DHCOM_CANModeEnum eCANMode)

Input values:

DHCOM_CANEnum eCANPort = DHCOM CAN port name (e.g. DHCOM_CAN1)

DHCOM_CANModeEnum eCANMode = DHCOM CAN mode name(e.g. DHCOM_CAN_STANDARD)

Return value: bool --> true = success; false = failed

Close

void CANClose(DHCOM_CANEnum eCANPort)

Input values:

DHCOM_CANEnum eCANPort = DHCOM CAN port name (e.g. DHCOM_CAN1)

Configure

bool CANConfigureMode(DHCOM_CANEnum eCANPort, DHCOM_CANModeEnum eCANMode, unsigned long lCANBitrate = 0, bool bCANTLPrio = false, bool bCANLoopback = false)

Input values:

DHCOM_CANEnum eCANPort = DHCOM CAN port name (e.g. DHCOM_CAN1)

DHCOM_CANModeEnum eCANMode = DHCOM CAN mode name(e.g. DHCOM_CAN_STANDARD)

unsigned long lCANBitrate = DHCOM UART frequency (e.g. 500000 bit/s = 500kbit)

bool bCANTLPrio = DHCOM CAN transmit local prio (e.g. false = disabled)

bool bCANLoopback = DHCOM CAN loopback mode (e.g. false = disabled)

Return value: bool --> true = success; false = failed

Configure Timing

bool CANConfigureTimimg(DHCOM_CANEnum eCANPort, ulong lPrescaler, byte cPropSeg, byte cPhase1Seg, byte cPhase2Seg, byte RJW)

Input values:

DHCOM_CANEnum eCANPort = DHCOM CAN port name (e.g. DHCOM_CAN1)

ulong lPrescaler = Prescaler value

byte cPropSeg = Property segmentation time value

byte cPhase1Seg = Phase 1 segmentation time value

byte cPhase2Seg = Phase 2 segmentation time value

byte RJW = Request jump time value

Return value: bool --> true = success; false = failed

Configure Filter

bool CANConfigureFilter(DHCOM_CANEnum eCANPort, int iFilterID, int iFilterIDMask, bool bFilterFormat, bool bFilterRemote)

Input values:

DHCOM_CANEnum eCANPort = DHCOM CAN port name (e.g. DHCOM_CAN1)

int iFilterID = Filter ID value

int iFilterIDMask = Filter ID Mask value

bool bFilterFormat = Filter format (e.g. false = disabled)

bool bFilterRemote = Filter remote frame (e.g. false = disabled)

Return value: bool --> true = success; false = failed

Remove Filter

bool CANResetFilter(DHCOM_CANEnum eCANPort)

Input values:

DHCOM_CANEnum eCANPort = DHCOM CAN port name (e.g. DHCOM_CAN1)

Return value: bool --> true = success; false = failed

Configure Message

bool CANConfigureMessage(DHCOM_CANEnum eCANPort, DHCOM_CANFrameEnum eCANFrame, int iCANMsgID, byte cCANMsgPrio, ulong lCANMsgTimeout, bool bTXAbort)

Input values:

DHCOM_CANEnum eCANPort = DHCOM CAN port name (e.g. DHCOM_CAN1)

DHCOM_CANFrameEnum eCANFrame = DHCOM CAN frame name (e.g. DHCOM_CAN_DATA)

int iCANMsgID = CAN Message identification number (e.g. 0x2)

byte cCANMsgPrio = CAN Message priority (e.g. 1)

ulong lCANMsgTimeout = CAN Message timeout (e.g. 1000 = 1 sec)

bool bTXAbort = CAN Message timeout enable (e.g. false = disabled)

Return value: bool --> true = success; false = failed

Get Message Header

bool CANGetMessageParameter(DHCOM_CANEnum eCANPort, ref int iCANMsgID, ref int iCANMsgLength, ref int iCANFrame, ref byte cCANMsgPrio, ref ulong lCANMsgTimeout, ref int iTXAbort)

Input values:

DHCOM_CANEnum eCANPort = DHCOM CAN port name (e.g. DHCOM_CAN1)

ref int iCANMsgID = Pointer to Message identification value

ref int iCANMsgLength = Pointer to Message length value

ref int iCANFrame = Pointer to Message frame value

ref byte cCANMsgPrio = Pointer to Message priority value

ref ulong lCANMsgTimeout = Pointer to Message timeout value

ref int iTXAbort = Pointer to Message TX abort value

Return value: bool --> true = success; false = failed

Read

bool CANRead(DHCOM_CANEnum eCANPort, byte[] pInBuffer, int iDataLength)

Input values:

DHCOM_CANEnum eCANPort = DHCOM CAN port name (e.g. DHCOM_CAN1)

byte[] pInBuffer = Pointer to the input buffer

int iDataLength = Read data length

Return value: bool --> true = success; false = failed

Write

bool CANWrite(DHCOM_CANEnum eCANPort, byte[] pOutBuffer, int iDataLength = 8)

Input values:

DHCOM_CANEnum eCANPort = DHCOM CAN port name (e.g. DHCOM_CAN1)

byte[] pOutBuffer = Pointer to the output buffer

int iDataLength = Write data length

Return value: bool --> true = success; false = failed

Physical Memory

Note: These freqencies can only be set. The mapping is done with the following enum.

   public enum DHCOM_PHYEnum
   {
       DHCOM_PHY1=1,
       DHCOM_PHY2,
       DHCOM_PHY3,
       DHCOM_PHY4,
       DHCOM_PHY5,
       DHCOM_PHY6,
       DHCOM_PHY7,
       DHCOM_PHY8,
       DHCOM_PHY9
   };

Write Physical Address

int WritePhysicalAddress(DHCOM_PHYEnum PHYDev, ulong ulPhyAddr, byte cRegSize, int iValue, bool bReadBack)

Input values:

DHCOM_PHYEnum PHYDev = DHCOM PHY Device name (e.g. DHCOM_PHY1)

ulong ulPhyAddr = Physical Address to write (e.g. GPIO1_MASK_REG = 0x209c014)

byte cRegSize = Register Size (8 = 8bit, 16 = 16bit, 32 = 32bit)

int iValue = Value for Physical Address to write

bool bReadBack = Enable/Disable Readback function (enable = true -> disable = false)

Return value: int --> returns the written value from the specified Physical Address

if bReadBack == TRUE, else 0x0 will be returned

Read Physical Address

int ReadPhysicalAddress(DHCOM_PHYEnum PHYDev, ulong ulPhyAddr, byte cRegSize)

Input values:

DHCOM_PHYEnum PHYDev = DHCOM PHY Device name (e.g. DHCOM_PHY1)

ulong ulPhyAddr = Physical Address to write (e.g. GPIO1_MASK_REG = 0x209c014)

byte cRegSize = Register Size (8 = 8bit, 16 = 16bit, 32 = 32bit)

Return value: int --> returns the value from the specified Physical Address

KITL

Restart

bool RestartPowerKITL()

Input values:

Return value: bool --> true = success; false = failed

Control

bool ControlPowerKITL(bool bEnable)

Input values:

bool bEnable = Enable/Disable KITL Connection

Return value: bool --> true = success; false = failed

Backlight

Backlight Level

bool SetBacklightLevel(int Level)

Note: In DHHalLib Version 1.0.0.0 only Backlight Enable/Disable available. (Value 0 = Disable, Value 1 to 255 = Enable)

Input values:

int Level = Backlight Level (0 ... 255)

Return value: bool --> true = success; false = failed

Backlight Timeout

bool SetBacklightSuspend(int Timeout, bool bEnable)

Note: In DHHalLib Version 1.0.0.0 not available.

Input values:

int Timeout = Timeout for Backlight (seconds)

bool bEnable = Enable/Disable Timeout Backlight --> true = On; false = Off

Return value: bool --> true = success; false = failed

Touch screen

Calibrate touch

bool CalibrateTouch()

Return value: bool --> true = success; false = failed

Clear calibration data

bool ClearTouchCalibrationData()

Description:

This function delete the registry entry [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH] dword:"TouchCalibrationDone" . For saving the value permanent please call SaveRegistry() afterwards.

Return value: bool --> true = success; false = failed

Registry

Save HIVE registry

bool SaveRegistry()

Return value: bool --> true = success; false = failed

Create backup

bool CreateRegistryBackup()

Description:

This function generates the files ave_HKLM_Reg.srg and Save_HKLCU_Reg.srg in the folder \Storage Card\. These files can be used at a later time to restore the registry.

Return value: bool --> true = success; false = failed

Restore backup

bool RestoreRegistryBackup()

Description:

This function restores the registry from the files Save_HKLM_Reg.srg and Save_HKLCU_Reg.srg in the folder \Storage Card\. Afterwards a restart is carried out automatically. If the backup files are not present, then the function returns the return value flase.

Return value: bool --> true = this never happens because a soft reset is performed; false = failed

Watchdog & Reset

Soft reset

void SoftReset()

WEC2013 Debugging

1. Enable connection to WEC2013 device via Telnet. DH electronics recommends PuTTY for Telnet connection.

Notes: PuTTY can be downloaded from www.heise.de. Default IP address is 192.168.1.110. No Login is used with the testsystem.

2. Before the Remote Debug session can be started it is necessary to start two applications via the telnet connection, by using the following commands:

• START conmanclient3.exe
• START cmaccept3.exe

NOTE: If you boot up the device, you have to start the service conmanclient3.exe once. The service cmaccept3.exe needs to be start before you will deploy or debug your application. The service cmaccept3.exe is closed automatically after 3 minutes. Be sure to connect your application with the device during this time period. Otherwise you have to start the cmaccept3.exe again. The files are stored in folder \windows\ at testimage.

3. Now the debug session can be started from visual studio.

WEC2013 VNC Connection

With WEC2013 efonVNC is used for remote desktop connection. For more information and license click here.

1. vncconfig.exe can be used to configure password and connection details (stored in folder \apps\wec2013\ at testimage).

NOTES:

• default password: dhcom_imx6
• default port number: 5900
• Configuration is stored in registry at path [HKEY_CURRENT_USER\Software\RealVNC\WinVNC4]

2. winvnc.exe (stored in folder \apps\wec2013\ at testimage) must be started. This is done atomatically at startup with the testimage. Otherwise the application can be started via telnet.

3. Download VNC viewer provided by RealVNC for PC/Laptop from here. For more information and license click here.

4. Run VNC viewer application and connect the device by using IP address and port number.

NOTES:

• default IP address: 192.168.1.110
• default port number: 5900

WEC2013 Remote Tools

Before remote tools can be used, it is necessary to sstart some applications on WEC2013 Device.

1. Enable connection to WEC2013 device via Telnet. DH electronics recommends PuTTY for Telnet connection.

Notes: PuTTY can be downloaded from www.heise.de. Default IP address is 192.168.1.110. No Login is used with the testsystem.

2. Before the Remote Debug session can be started it is necessary to start two applications via the telnet connection, by using the following commands:

• START conmanclient3.exe
• START cmaccept3.exe

NOTE: If you boot up the device, you have to start the service conmanclient3.exe once. The service cmaccept3.exe needs to be start before you will deploy or debug your application. The service cmaccept3.exe is closed automatically after 3 minutes. Be sure to connect your application with the device during this time period. Otherwise you have to start the cmaccept3.exe again. The files are stored in folder \windows\ at testimage.

3. Now it is possible to use remote tools from Visual Studio

WEC2013 Test Tools

TEST_APP_CANTEST

The app can be used to test DHCOM CAN Port. The application is stored at folder \apps\wec2013\.

Download CAN Demo source code

CAN WRITE:

TEST_APP_CANTEST --write --len 8 --id 0x12 --idlen 11 --val 0x55 --remote 0

Description of the example:

• --len: Send 8 Bytes
• --id: Message ID is 0x12
• --idlen: 11 = Standard ID; 29 can be used fpr extended ID
• --val: Data starts with 0x55, then 0x56, ...
• --remote: 0 = no remote frame

CAN READ:

TEST_APP_CANTEST --read --timeout 10000

Description of the example:

• The application waits for 10 seconds to receive data.

CAN GET BITRATE:

TEST_APP_CANTEST --getbitrate

Description of the example:

• The application shows the current used bitrate.

CAN SET BITRATE:

TEST_APP_CANTEST --setbitrate --bitrate 250000

Description of the example:

• The application sets bitrate to 250kbps.

UART_Test

The app can be used to test DHCOM UART 2 Port. The application is stored at folder \apps\wec2013\.

Download UART Demo source code

UART_Test

Description of the example:

• The application cyclic sends "Hello World" and receives data.
• The baudrate 115200 is used for the demo.
• q must be send to exit the demo.