Avenger96

Introduction

• Introduction

The AVENGER Board is a 96Boards compliant consumer edition board based on the STM32MP15 series of SoCs. The STM32MP15 series is a highly integrated multi-market applications processor designed to enable secure and portable applications within the Internet of Things. AVENGER board features Dual-core Arm® Cortex®-A7 processors operating at up to 650 Hz, Single core Arm® Cortex® M4 operating up to 200 MHz. In addition, an extensive set of interfaces and connectivity peripherals are included to interface to cameras, touch-screen displays, MMC/SD cards and media processor engine. It also fully supports wireless communication, including WLAN and BLE.

Hardware

• Hardware

STM32MP157AAC 2x ARM® Cortex-A7 up to 650 MHz 1x ARM® Cortex-M4 up to 200 MHz 2D/3D graphics accelerator 0 - 512 MByte NAND flash memory (8 bit bus width) or 2 - 16 GByte eMMC flash 2 MB SPI boot flash 256 - 2048 MByte DDR3-1066 or DDR3-800 On-board microSD card socket SD/MMC card interface, 4 bit SDIO LC display controller, 24 bit colors, 2048x1536 pixels LVDS 4-channel, max. 165 Mpixels/s On-board touch controller for 4-wire resistive touch screens Ethernet controller 10/100 Mbit, IEEE1588 conform USB 2.0 OTG high-speed USB 2.0 host high speed Full function UART Standard UART with hardware handshake support Standard UART

CAN interface 2 x SPI interface 2 x I2CTM interface I²S Audio codec (1 x microphone, 1 x Line in, 1x Line out) Real-time clock (I2CTM connection), low power temperature compensated 12 bit analog input 1 kbit EEPROM with integrated MAC address 16 bit address/databus interface on SODIMM-200 socket PWM channel 23 GPIOs JTAG debug connection via FFC plug connector Industrial temperature range (-40°C to +85°C) SODIMM-200 socket with DHCOM pin assignment

Downloads

Documents

• Getting-Started