COM AM35 WinCE

Audio Codec

Record input selection

Select Microphone as the recorder device

wavmixer –s IN 2 1

Select LineIn as the recorder device

wavmixer –s IN 2 0

Microphone boost

Enable 20dB Mic boost

wavmixer –s IN 3 1

DHHalLib (function library)

The DHHalLib provides hardware related functions for Windows Embedded CE 6 and Windows Embedded Compact 7. All the functionality is available from the user mode.

Version numbers

Read DHHalLib version

unsigned long DHHalLibGetVersion()

Return value: unsigned long --> version number (e.g. 0x01040001 for version 1.4.0.1)

BSP version

unsigned long BSPGetVersion()

Return value: unsigned long --> version number (e.g. 0x01040001 for version 1.4.0.1)

Note: The version number information is stored in the following registry key: [HKEY_LOCAL_MACHINE\Ident] dword:"BSPVersionNumber"

Read image version

unsigned long WinCEImageGetVersion()

Return value: unsigned long --> version number (e.g. 0x01040001 for version 1.4.0.1)

I2C

Open

bool I2COpen(unsigned char cI2CPort)

Input values:

unsigned char cI2CPort = DHCOM I2C port number (1.. 2)

Return value: bool --> true = success; false = failed

Close

void I2CClose(unsigned char cI2CPort)

Input values:

unsigned char cI2CPort = DHCOM I2C port number (1.. 2)

Read

bool I2CRead( unsigned char cI2CPort, unsigned char cDevId, unsigned char cI2CReg, bool bSendStop, unsigned char *pOutBuffer)

Input values:

unsigned char cI2CPort = DHCOM I2C port number (1.. 2)

unsigned char iDevId = I2C device address (0..127)

unsigned char iI2CReg = I2C device register address (0..255)

bool bSendStop = NOT SUPPORTED

unsigned char *pOutBuffer = Pointer to the read byte

Return value: bool --> true = success; false = failed

Write

bool I2CWrite( unsigned char cI2CPort, unsigned char cDevId, unsigned char cI2CReg, unsigned char cValue, bool bSendStop)

Input values:

unsigned char cI2CPort = DHCOM I2C port number (1.. 2)

unsigned char iDevId = I2C device address (0..127)

unsigned char iI2CReg = I2C device register address (0..255)

unsigned char iValue = Value to be written

bool bSendStop = NOT SUPPORTED

Return value: bool --> true = success; false = failed

Read multiple bytes

bool I2CReadMultipleBytes( unsigned char cI2CPort, unsigned char cDevId, unsigned char cI2CReg, unsigned char cBytes, bool bSendStop, unsigned char *pOutBuffer)

Input values:

unsigned char cI2CPort = DHCOM I2C port number (1.. 2)

unsigned char iDevId = I2C device address (0..127)

unsigned char iI2CReg = I2C device register address (0..255)

unsigned char cBytes = Number of bytes to be read (max. 255)

bool bSendStop = NOT SUPPORTED

unsigned char *pOutBuffer = Pointer to the read buffer

Return value: bool --> true = success; false = failed

Write multiple bytes

bool I2CWriteMultipleBytes( unsigned char cI2CPort, unsigned char cDevId, unsigned char cI2CReg, unsigned char cBytes, bool bSendStop, unsigned char *pInBuffer)

Input values:

unsigned char cI2CPort = DHCOM I2C port number (1.. 2)

unsigned char iDevId = I2C device address (0..127)

unsigned char iI2CReg = I2C device register address (0..255)

unsigned char cBytes = Number of bytes to be written (max. 255)

bool bSendStop = NOT SUPPORTED

unsigned char *pInBuffer = Pointer to the input buffer

Return value: bool --> true = success; false = failed

Bus scan

bool I2CProbe(unsigned char cI2CPort, unsigned char cDevId)

Description:

Scans the bus for the specified device address. Is this achievable, then the function returns "true".

Input values:

unsigned char cI2CPort = DHCOM I2C port number (1.. 2)

unsigned char iDevId = I2C device address (0..127)

Return value: bool --> true = success; false = failed

GPIO

Note: These functions can only access the DHCOM standard GPIOs. The mapping is done with the following enum.

  enum DHCOM_GPIOEnum
  {
    DHCOM_GPIO_A,
    DHCOM_GPIO_B,
    DHCOM_GPIO_C,
    DHCOM_GPIO_D,
    DHCOM_GPIO_E,
    DHCOM_GPIO_F,
    DHCOM_GPIO_G,
    DHCOM_GPIO_H,
    DHCOM_GPIO_I,
    DHCOM_GPIO_J,
    DHCOM_GPIO_K,
    DHCOM_GPIO_L,
    DHCOM_GPIO_M,
    DHCOM_GPIO_N,
    DHCOM_GPIO_O,
    DHCOM_GPIO_P,
    DHCOM_GPIO_Q,
    DHCOM_GPIO_R,
    DHCOM_GPIO_S,
    DHCOM_GPIO_T,
    DHCOM_GPIO_U,
    DHCOM_GPIO_V,
    DHCOM_GPIO_W,
    DHCOM_GPIO_NOT_DEFINED
  };

Direction

bool GPIOSetDirection( DHCOM_GPIOEnum eGpio, bool bInOut, bool bDefaultState)

Input values:

DHCOM_GPIOEnum eGpio = DHCOM GPIO pin name

bool bInOut = GPIO direction (1 = input / 0 = output)

bool bDefaultState = Default state (0 = low / 1 = high)

Return value: bool --> true = success; false = failed

Set state

void GPIOSetPin(DHCOM_GPIOEnum eGpio, bool bState)

Input values:

DHCOM_GPIOEnum eGpio = DHCOM GPIO pin name

bool bState = pin state ( 0 = low / 1 = high)

Read state

bool GPIOGetPin(DHCOM_GPIOEnum eGpio)

Input values:

DHCOM_GPIOEnum eGpio = DHCOM GPIO pin name

Return value: bool --> 0 = low; 1 = high

Memory

Read physical address

int ReadPhysicalAddress(int iPhyAddr, unsigned char cRegSize)

Input values:

int iPhyAddr = Physical address

unsigned char cRegSize = Register size (16 = 16bit; 32 = 32bit)

Return value: int --> current value of the physical address

Write physical address

int WritePhysicalAddress( int iPhyAddr, unsigned char cRegSize, int iValue, bool bReadBack)

Input values:

int iPhyAddr = physical address

unsigned char cRegSize = Register size (16 = 16bit; 32 = 32bit)

int iValue = Value to be written

bool bReadBack = true --> the current value is read back after the write; false --> the current value isn’t read back after the write

Return value: int --> content of the physical address after write, if bReadBack = true. Otherwise the function returns 0.

Map physical memory

PVOID UserMmMapIoSpace(ULONG PhysicalAddress, ULONG NumberOfBytes, BOOLEAN CacheEnable)

Note: Not supported from WinEC7.

UnMap physical memory

void UserMmUnmapIoSpace(PVOID BaseAddress, ULONG NumberOfBytes)

Note: Not supported from WinEC7.

Backlight

PWM

bool SetPWM(ULONG Period, ULONG DutyCycle)

Input values:

ULONG Period = Period in us

ULONG DutyCycle = Duty cycle in percent

Return value: bool --> true = success; false = failed

Touch screen

Calibrate touch

bool CalibrateTouch()

Return value: bool --> true = success; false = failed

Save calibration data

bool SaveTouchCalibrationData()

Description:

This function sets the registry entry [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH] dword:"TouchCalibrationDone" to the value 1. For saving the value permanent please call SaveRegistry() afterwards.

Return value: bool --> true = success; false = failed

Clear calibration data

bool ClearTouchCalibrationData()

Description:

This function sets the registry entry [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH] dword:"TouchCalibrationDone" to the value 0. For saving the value permanent please call SaveRegistry() afterwards.

Return value: bool --> true = success; false = failed

Registry

Save HIVE registry

bool SaveRegistry()

Return value: bool --> true = success; false = failed

Create backup

bool CreateRegistryBackup()

Description:

This function generates the files ave_HKLM_Reg.srg and Save_HKLCU_Reg.srg in the folder \Storage Card\. These files can be used at a later time to restore the registry.

Return value: bool --> true = success; false = failed

Restore backup

bool RestoreRegistryBackup()

Description:

This function restores the registry from the files Save_HKLM_Reg.srg and Save_HKLCU_Reg.srg in the folder \Storage Card\. Afterwards a restart is carried out automatically. If the backup files are not present, then the function returns the return value flase.

Return value: bool --> true = this never happens because a soft reset is performed; false = failed

Watchdog & Reset

Soft reset

void SoftReset()