Introduction
The AVENGER Board is a 96Boards compliant consumer edition board based on the STM32MP15 series of SoCs. The STM32MP15 series
is a highly integrated multi-market applications processor designed to enable secure and portable applications within the Internet of Things.
AVENGER board features Dual-core Arm® Cortex®-A7 processors operating at up to 650 Hz, Single core Arm® Cortex® M4 operating up to
200 MHz. In addition, an extensive set of interfaces and connectivity peripherals are included to interface to cameras, touch-screen displays,
MMC/SD cards and media processor engine. It also fully supports wireless communication, including WLAN and BLE.
Technical Details
|
|
|
- STM32MP157AAC
- 2x ARM® Cortex-A7 up to 650 MHz
- 1x ARM® Cortex-M4 up to 200 MHz
- GPU 1x 3D GPU Vivante® @ 533 MHz - OpenGL® ES 2.0
- PMIC STPMIC1A
- DDR3 DRAM 1024 Mbyte @ 533 MHz
- eMMC Flash 8 Gbyte, v4.51 interface
- NOR Flash 2 Mbyte, Quad SPI interface
- EEPROM 128 byte
- microSD Socket UHS-I speed grade, v3.01
- USB Host 2x type A, 2.0 high-speed
- USB OTG 1x type micro-AB, 2.0 high-speed
- HDMI WXGA (1366x768) @ 60 fps, HDMI 1.4
- WiFi / Bluetooth
- WiFi 5 GHz & 2.4GHz IEEE 802.11a / b / g / n / ac
- Bluetooth® v4.2 (BR/EDR/BLE)
- PCB antenna
- Ethernet 10 / 100 / 1000 Mbit/s, IEEE 802.3-compliant
|
- Push-Buttons Power and reset
- Battery Socket CR1216, CR1220 and CR1225
- LEDs
- 4x green user controlled LEDs
- 1x blue Bluetooth enabled
- 1x yellow WiFi enabled
- 1x red power supply okay
- Boot Mode 3 bit boot mode switch
- Debug Interface JTAG interface via tag-connect
- Supply (SYS_DCIN) 8 - 18 VDC
- Temperature Range 0 - 40 °C
- Dimensions 100 x 85 mm
- Serial Peripherals
- 2 x UART
- 2 x I2C
- 1 x I2S
- 1 x SPI
- 1 x GPIOs
|
Downloads
Documents
Images
Links
