Calibration of resistive touchscreens

From Wiki-DB
Revision as of 07:39, 20 October 2023 by Pzimmermann (talk | contribs) (Remove headings)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

On devices with resistive touchscreens, the touchscreen has to be calibrated.

At our yocto images, we usually use libinput as library for handling input.

Prerequisites

  • Yocto packages weston, weston-init and weston-examples have to be installed inside the image.
  • The config file /etc/xdg/weston/weston.ini needs the following lines (to enable touchscreen calibration):
[libinput]
touchscreen_calibrator=true

After changing the configuration of weston, weston needs to be restarted:

systemctl restart weston

Steps for calibration

1. Get the touchscreen device name with weston-touch-calibrator

XDG_RUNTIME_DIR=/var/run/user/$(id -u weston) weston-touch-calibrator

Example result (bold part is needed for next steps):

device "/sys/devices/platform/soc/2100000.bus/21a8000.i2c/i2c-2/2-0049/input/input0/event0" - head "DPI-1"

2. Run weston-touch-calibrator on the device for starting the calibration. With the example part of the last result, the command looks like this (bold part is from the last result):

XDG_RUNTIME_DIR=/var/run/user/$(id -u weston) weston-touch-calibrator -v /sys/devices/platform/soc/2100000.bus/21a8000.i2c/i2c-2/2-0049/input/input0/event0

Now you press the highlighted points at the touchscreen to calibrate it. You will now get an output on the console like this (the important part is marked bold):

Calibration values: -0.001472 -1.081086 1.033880 -1.135099 0.000319 1.082698

3. To make the calibration permanent, you need to add a udev rule. Create the file /etc/udev/rules.d/touchscreen-cal.rules and use the calibration values there. With the result of the previous example, the file looks like this (bold part is the result of the last example):

SUBSYSTEM=="input", KERNEL=="event[0-9]*", ENV{ID_INPUT_TOUCHSCREEN}=="1", ENV{LIBINPUT_CALIBRATION_MATRIX}="-0.001472 -1.081086 1.033880 -1.135099 0.000319 1.082698"