UBI/UBIFS Filesystem
Overview
On DHCOM Systems with Linux the UBIFS Filesystem is used for the NAND-Flash root-filesystem. The Unsorted Block Image File System (UBIFS) is a filesystem for use with raw flash memory media. UBIFS works on top of an Unsorted Block Images (UBI) device, which is itself on top of an MTD device.
For further details please have a look at
Create Images
To create UBI-Images or UBIFS-Images you need to install the "mtd-utils" on your Linux host pc. We recommend to download the latest version of the mtd-utils form the mtd-utils git-repository because it is reported that some versions from the distribution repositorys are buggy and/or out of date.
Create UBIFS Images
To create a UBIFS Image you need some hardware-depended information.
<min io size>Equals the page-size of the used NAND-Flash<LEB size>Logical Erase Block size<Erase Blocks count>maximum logical erase block count
If got this information, you can create a UBIFS-Image from a directory-tree with the following command:
# sodu mkfs.ubifs -F -r </path/to/your/rootfs/tree> -m <min io size> -e <LEB size> -c <Erase Blocks count> -o </path/to/output/Image.ubifs>
Examples
for am3517 with 256MB NAND-Flash
# sudo mkfs.ubifs –F -r /work/rootfs -m 2048 -e 126976 -c 1700 -o am35x.ubifs
for i.MX25 with 256MB NAND-Flash
# sudo mkfs.ubifs –F -r /work/rootfs -m 2048 -e 129024 -c 1700 -o imx25.ubifs
Remark To use the option -F you habe to run a kernel version 3.0 or higher. You need to have the "mtd-utils" version 1.5.x or higher, too.
Use the ubinfo command on your device to check the LEB size and count.
Example: # ubinfo /dev/ubi0
Create UBI Images
To create a UBI image you have to have already a UBIFS image. Use the following command:
# ubinize -vv -o <output image> -m <min io size> -p <PEB size>KiB -s <subpage-size> -O <VID-hdr-offset> <configuration file>
<min io size>Equals the page-size of the used NAND-Flash<PEB size>Physical Erase Block size (in KiB) - Equals the block size of the NAND-Flash<Erase Blocks count>Count of the available Erase Blocks<subpage-size>Subpage size in bytes. Default value is the minimum input/output size (page-size)<VID-hdr-offset>offset if the VID header from start of the PEB (default is the next min I/O unit or sub-page after the EC header)<configuration file>Path to a configuration file.
Example of a configuration file content (config.ini):
[rootfs_volume]
mode=ubi
image=imx25.ubifs
vol_id=0
vol_type=dynamic
vol_name=nand_rootfs
vol_flags=autoresize
Examples
for am3517
# sudo ubinize -vv -o am3517_rtfs.ubi -m 2048 -p 128KiB config.ini
for i.MX25
# sudo ubinize -vv -o imx25_rtfs.ubi -m 2048 -p 128KiB -s 512 -O 512 config.ini
User-space tools
The UBI/UBIFS user-space tools are included within the mtd-utils.
some commands are:
ubinfo- provides information about UBI devices and volumes found in the system;ubiattach- attaches MTD devices (which describe raw flash) to UBI and creates corresponding UBI devices;ubidetach- detaches MTD devices from UBI devices (the opposite to what ubiattach does);ubimkvol- creates UBI volumes on UBI devices;ubirmvol- removes UBI volumes from UBI devices;ubiupdatevol- updates UBI volumes;ubiformat- formats empty flash, erases flash and preserves erase counters, flashes UBI images to MTD devices;mtdinfo- reports information about MTD devices found in the system.
Use the "-h" option to get more information about the commands.
Flashing UBI/UBIFS Images
The following commands can be used to flash UBI/UBIFS Images. When you want to run a linux root-filesystem update please use the DHCOM Update Mechnism. You can use the following commands for data partitions.
Flash a UBIFS Image
ubiformat /dev/mtdX
ubiattach -m X -d Y /dev/ubi_ctrl
ubimkvol /dev/ubiY -N volume_name -s -m
ubiupdatevol /dev/ubiY_0 /path/to/Image.ubifs
Flash a UBI Image
ubiformat /dev/mtdX –f Image.ubi
