COM iMX6 Bootloader U-Boot

From Wiki-DB
Revision as of 09:37, 26 May 2014 by Ageisreiter (talk | contribs) (Replaced content with "== FAQ == == Downloads == == Enter Bootloader Console == :#Connect DHCOM UART1 (FF UART) via null modem cable to the RS232 Port of your PC :#Start terminal program (e.g. Te...")
Jump to navigationJump to search

FAQ

Downloads

Enter Bootloader Console

  1. Connect DHCOM UART1 (FF UART) via null modem cable to the RS232 Port of your PC
  2. Start terminal program (e.g. Tera Term) on the Host PC with the following settings:
    Baud rate: 115200
    Data: 8 bit
    Parity: none
    Stop bits: 1 bit
    Flow control: none
  3. Press "del" on the Host PC during Core Module system start to enter bootloader console

U-boot console commands

Retrieved from "https://wiki.dh-electronics.com/index.php?title=COM_iMX6_Bootloader_U-Boot&oldid=1033"