COM iMX6 WinCE

FAQ

WEC7 Tools

CE Remote Display Application

The Remote Display allows to operate the target device's Win CE desktop from a Windows PC. It requires a USB ActiveSync connection.

Download X86 remote display application (over ActiveSync connection)

Usage

1. Extract the zip file on your PC.

2. Wait for the ActiveSync connection to be ready.

3. Start ASRDisp.exe.

Binary BSP user guide

1. Download binary BSP (Please have a look at the iMX6 Downloads section.).

2. Unzip the files to any folder on your PC.

3. Call link-DHCOM_iMX6_BIN_GEN.bat file in the folder ...\DHCOM_iMX6_BSP_BIN\, to generate symbolic links in the \WINCE700\ folder.

4. Start Visual Studio 2008 with WEC7 platform builder.

5. Open platform builder project DHCOM_iMX6.pbxml at location C:\WINCE700\OSDesigns\DHCOM_iMX6_WEC7\.

6. Select retail build.

7. Call build --> rebuild solution to build the WEC7 image.

8. After the image build has completed successfully, the nk.nb0 image is stored at location C:\WINCE700\OSDesigns\DHCOM_iMX6_WEC7\RelDir\_1_Retail_DHCOM_iMX6_ARMV7\.

9. Copy the new nk.nb0 to your mircoSD card and restart the system.

Note: To delete the symbolic links (see 3.) please call unlink-DHCOM_iMX6_BIN_GEN.bat file in the folder ...\DHCOM_iMX6_BSP_BIN\

WEC7 DHHalLib (function library)

The DHHalLib provides hardware related functions for Windows Embedded CE 6 and Windows Embedded Compact 7. All the functionality is available from the user mode.

Version numbers

Read DHHalLib version

`unsigned long DHHalLibGetVersion()`

Return value: unsigned long --> version number (e.g. 0x01040001 for version 1.4.0.1)

BSP version

`unsigned long BSPGetVersion()`

Return value: unsigned long --> version number (e.g. 0x01040001 for version 1.4.0.1)

Note: The version number information is stored in the following registry key: [HKEY_LOCAL_MACHINE\Ident] dword:"BSPVersionNumber"

Read image version

`unsigned long WinCEImageGetVersion()`

Return value: unsigned long --> version number (e.g. 0x01040001 for version 1.4.0.1)

GPIO

Note: These functions can only access the DHCOM standard GPIOs. The mapping is done with the following enum.

  typedef enum DHCOM_GPIOEnum
  {
    DHCOM_GPIO_A,
    DHCOM_GPIO_B,
    DHCOM_GPIO_C,
    DHCOM_GPIO_D,
    DHCOM_GPIO_E,
    DHCOM_GPIO_F,
    DHCOM_GPIO_G,
    DHCOM_GPIO_H,
    DHCOM_GPIO_I,
    DHCOM_GPIO_J,
    DHCOM_GPIO_K,
    DHCOM_GPIO_L,
    DHCOM_GPIO_M,
    DHCOM_GPIO_N,
    DHCOM_GPIO_O,
    DHCOM_GPIO_P,
    DHCOM_GPIO_Q,
    DHCOM_GPIO_R,
    DHCOM_GPIO_S,
    DHCOM_GPIO_T,
    DHCOM_GPIO_U,
    DHCOM_GPIO_V,
    DHCOM_GPIO_W,
    DHCOM_GPIO_NOT_DEFINED
  }*pDHCOM_GPIOEnum;

Direction

`bool GPIOSetDirection( DHCOM_GPIOEnum eGpio, bool bInOut, bool bDefaultState)`

Input values:

DHCOM_GPIOEnum eGpio = DHCOM GPIO pin name

bool bInOut = GPIO direction (1 = input / 0 = output)

bool bDefaultState = Default state (0 = low / 1 = high)

Return value: bool --> true = success; false = failed

Set state

`void GPIOSetPin(DHCOM_GPIOEnum eGpio, bool bState)`

Input values:

DHCOM_GPIOEnum eGpio = DHCOM GPIO pin name

bool bState = pin state ( 0 = low / 1 = high)

Read state

`bool GPIOGetPin(DHCOM_GPIOEnum eGpio)`

Input values:

DHCOM_GPIOEnum eGpio = DHCOM GPIO pin name

Return value: bool --> 0 = low; 1 = high

Set Interrupt

`bool GPIOSetInterrupt(DHCOM_GPIOEnum eGpio, HANDLE hEvent, unsigned long ulTimeout)`*

Input values:

DHCOM_GPIOEnum eGpio = DHCOM GPIO pin name

HANDLE *hEvent = external EventHandle Pointer

bool bState = GPIO Interrupt State

Return value: bool --> true = success; false = failed

Clear Interrupt

`bool GPIOClearInterrupt(DHCOM_GPIOEnum eGpio)`

Note: Gpio Interrupt cannot disable by Hardware.

Input values:

DHCOM_GPIOEnum eGpio = DHCOM GPIO pin name

Return value: bool --> true = success; false = failed

I2C

Note: These I2C Devices can only be set. The mapping is done with the following enum.

  typedef enum DHCOM_I2CEnum
  {
   DHCOM_I2C0=0,
   DHCOM_I2C1,
   DHCOM_I2C2,
   DHCOM_I2C3,
   DHCOM_I2C_NOT_DEFINED
  }*pDHCOM_I2CEnum;

Note: These freqencies can only be set. The mapping is done with the following enum.

  typedef enum DHCOM_I2CFREQMode
  {
   I2C_100K=0,
   I2C_400K,
   I2C_800K,I2C_1600K,
   I2C_2400K,
   I2C_3200K
  }*pDHCOM_I2CFREQMode;

Open

`bool I2COpen(DHCOM_I2CEnum eI2CPort, DHCOM_I2CFREQMode eI2CFreq)`

Input values:

DHCOM_I2CEnum eI2CPort = DHCOM I2C port name (e.g. DHCOM_I2C0)

DHCOM_I2CFREQMode eI2CFreq = DHCOM I2C port freqency name(e.g. I2C_100K)

Return value: bool --> true = success; false = failed

Close

`void I2CClose(DHCOM_I2CEnum eI2CPort)`

Input values:

DHCOM_I2CEnum eI2CPort = DHCOM I2C port name (e.g. DHCOM_I2C0)

Read

`bool I2CRead(DHCOM_I2CEnum eI2CPort, DHCOM_I2CFREQMode eI2CFreq, unsigned char cDevId, unsigned char cI2CReg, unsigned char pOutBuffer)`*

Input values:

DHCOM_I2CEnum eI2CPort = DHCOM I2C port name (e.g. DHCOM_I2C0)

DHCOM_I2CFREQMode eI2CFreq = DHCOM I2C port freqency name(e.g. I2C_100K)

unsigned char cDevId = I2C device address (0..127)

unsigned char cI2CReg = I2C device register address (0..255)

unsigned char *pOutBuffer = Pointer to the read byte

Return value: bool --> true = success; false = failed

Write

`bool I2CWrite(DHCOM_I2CEnum eI2CPort, DHCOM_I2CFREQMode eI2CFreq, unsigned char cDevId, unsigned char cI2CReg, unsigned char cValue)`

Input values:

DHCOM_I2CEnum eI2CPort = DHCOM I2C port name (e.g. DHCOM_I2C0)

DHCOM_I2CFREQMode eI2CFreq = DHCOM I2C port freqency name(e.g. I2C_100K)

unsigned char cDevId = I2C device address (0..127)

unsigned char cI2CReg = I2C device register address (0..255)

unsigned char cValue = Value to be written

Return value: bool --> true = success; false = failed

Read multiple bytes

`bool I2CReadMultipleBytes(DHCOM_I2CEnum eI2CPort, DHCOM_I2CFREQMode eI2CFreq, unsigned char cDevId, unsigned char cI2CReg, unsigned char cBytes, unsigned char pOutBuffer)`*

Input values:

DHCOM_I2CEnum eI2CPort = DHCOM I2C port name (e.g. DHCOM_I2C0)

DHCOM_I2CFREQMode eI2CFreq = DHCOM I2C port freqency name(e.g. I2C_100K)

unsigned char cDevId = I2C device address (0..127)

unsigned char cI2CReg = I2C device register address (0..255)

unsigned char cBytes = Number of bytes to be read (max. 255)

unsigned char *pOutBuffer = Pointer to the read buffer

Return value: bool --> true = success; false = failed

Write multiple bytes

`bool I2CWriteMultipleBytes(DHCOM_I2CEnum eI2CPort, DHCOM_I2CFREQMode eI2CFreq, unsigned char cDevId, unsigned char cI2CReg, unsigned char cBytes, unsigned char pInBuffer)`*

Input values:

DHCOM_I2CEnum eI2CPort = DHCOM I2C port name (e.g. DHCOM_I2C0)

DHCOM_I2CFREQMode eI2CFreq = DHCOM I2C port freqency name(e.g. I2C_100K)

unsigned char cDevId = I2C device address (0..127)

unsigned char cI2CReg = I2C device register address (0..255)

unsigned char cBytes = Number of bytes to be read (max. 255)

unsigned char *pInBuffer = Pointer to the input buffer

Return value: bool --> true = success; false = failed

SPI

Note: These SPI Devices can only be set. The mapping is done with the following enum.

  typedef enum DHCOM_SPIEnum
  {
       DHCOM_SPI1=0,
       DHCOM_SPI2,
       DHCOM_SPI_NOT_DEFINED
  }*pDHCOM_SPIEnum;

Note: These chip selects can be set. The mapping is done with the following enum.

   typedef enum DHCOM_SPIModeEnum
   {
       SPI_CS0=0,
       SPI_CS1,
       SPI_CS2,
       SPI_CS3
   }*pDHCOM_SPIModeEnum;

Open

`bool SPIOpen(DHCOM_SPIEnum eSPIPort, DHCOM_SPIModeEnum eSPIMode, unsigned int iSPIFreq)`

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

DHCOM_SPIModeEnum eSPIMode = DHCOM SPI mode name(e.g. DHCOM_CS0)

unsigned int iSPIFreq = DHCOM SPI frequency (e.g. 16MHz = 16000000)

Return value: bool --> true = success; false = failed

Close

`void SPIClose(DHCOM_SPIEnum eSPIPort)`

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

Read

`bool SPIRead(DHCOM_SPIEnum eSPIPort, unsigned int pOutBuffer)`*

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

unsigned int *pOutBuffer = Pointer to the output buffer

Return value: bool --> true = success; false = failed

Write

`bool SPIWrite(DHCOM_SPIEnum eSPIPort, unsigned int pInBuffer, unsigned int pOutBuffer, bool bLoopback)`

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

unsigned int *pInBuffer = Pointer to the input buffer

unsigned int *pOutBuffer = Pointer to the output buffer (If not Loopback used = NULL)

bool bLoopback = Enable/Disable Loopback transmission

Return value: bool --> true = success; false = failed

Read multiple bytes

`bool SPIReadMultiple(DHCOM_SPIEnum eSPIPort, unsigned int iWCount, unsigned int pOutBuffer)`*

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

unsigned int iWCount = Number of bytes to read (max. 1024 Bytes)

unsigned int *pOutBuffer = Pointer to the output buffer

Return value: bool --> true = success; false = failed

Write multiple bytes

`bool SPIWriteMultiple(DHCOM_SPIEnum eSPIPort, unsigned int pOutBuffer, unsigned int iWCount)`*

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

unsigned int *pOutBuffer = Pointer to the output buffer

Return value: bool --> true = success; false = failed

Read bytes from NOR Flash

`bool SPIReadNORFlash(DHCOM_SPIEnum eSPIPort, unsigned int iSPIReg, unsigned int iWCount, unsigned int pOutBuffer)`*

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

unsigned int iSPIReg = SPI NOR Flash Start Address (0..65565)

unsigned int iWCount = Number of bytes to read (max. 1024 Bytes)

unsigned int *pOutBuffer = Pointer to the output buffer

Return value: bool --> true = success; false = failed

Write bytes to NOR Flash

`bool SPIWriteNORFlash(DHCOM_SPIEnum eSPIPort, unsigned int iSPIReg, unsigned int pOutBuffer, unsigned int iWCount)`*

Input values:

DHCOM_SPIEnum eSPIPort = DHCOM SPI port name (e.g. DHCOM_SPI1)

unsigned int iSPIReg = SPI NOR Flash Start Address (0..65565)

unsigned int *pOutBuffer = Pointer to the output buffer

Return value: bool --> true = success; false = failed

Physical Memory

Note: These freqencies can only be set. The mapping is done with the following enum.

   typedef enum DHCOM_PHYEnum
   {
       DHCOM_PHY1=1,
       DHCOM_PHY2,
       DHCOM_PHY3,
       DHCOM_PHY4,
       DHCOM_PHY5,
       DHCOM_PHY6,
       DHCOM_PHY7,
       DHCOM_PHY8,
       DHCOM_PHY9
   }*pDHCOM_PHYEnum;

Write Physical Address

`int WritePhysicalAddress(DHCOM_PHYEnum PHYDev, unsigned long ulPhyAddr, unsigned char cRegSize, int iValue, bool bReadBack)`

Input values:

DHCOM_PHYEnum PHYDev = DHCOM PHY Device name (e.g. DHCOM_PHY1)

unsigned long ulPhyAddr = Physical Address to write (e.g. GPIO1_MASK_REG = 0x209c014)

unsigned char cRegSize = Register Size (8 = 8bit, 16 = 16bit, 32 = 32bit)

int iValue = Value for Physical Address to write

bool bReadBack = Enable/Disable Readback function (enable = true -> disable = false)

Return value: int --> returns the written value from the specified Physical Address

if bReadBack == TRUE, else 0x0 will be returned

Read Physical Address

`int ReadPhysicalAddress(DHCOM_PHYEnum PHYDev, unsigned long ulPhyAddr, unsigned char cRegSize)`

Input values:

DHCOM_PHYEnum PHYDev = DHCOM PHY Device name (e.g. DHCOM_PHY1)

unsigned long ulPhyAddr = Physical Address to write (e.g. GPIO1_MASK_REG = 0x209c014)

unsigned char cRegSize = Register Size (8 = 8bit, 16 = 16bit, 32 = 32bit)

Return value: int --> returns the value from the specified Physical Address

KITL

Restart

`bool RestartPowerKITL()`

Input values:

Return value: bool --> true = success; false = failed

Control

`bool ControlPowerKITL(bool bEnable)`

Input values:

bool bEnable = Enable/Disable KITL Connection

Return value: bool --> true = success; false = failed

Backlight

Backlight Level

`bool SetBacklightLevel(int Level)`

Note: In DHHalLib Version 1.0.0.0 only Backlight Enable/Disable available. (Value 0 = Disable, Value 1 to 255 = Enable)

Input values:

int Level = Backlight Level (0 ... 255)

Return value: bool --> true = success; false = failed

Backlight Timeout

`bool SetBacklightSuspend(int Timeout, bool bEnable)`

Note: In DHHalLib Version 1.0.0.0 not available.

Input values:

int Timeout = Timeout for Backlight (seconds)

bool bEnable = Enable/Disable Timeout Backlight --> true = On; false = Off

Return value: bool --> true = success; false = failed

Touch screen

Calibrate touch

`bool CalibrateTouch()`

Return value: bool --> true = success; false = failed

Clear calibration data

`bool ClearTouchCalibrationData()`

Description:

This function delete the registry entry [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH] dword:"TouchCalibrationDone" . For saving the value permanent please call SaveRegistry() afterwards.

Return value: bool --> true = success; false = failed

Registry

Save HIVE registry

`bool SaveRegistry()`

Return value: bool --> true = success; false = failed

Create backup

`bool CreateRegistryBackup()`

Description:

This function generates the files ave_HKLM_Reg.srg and Save_HKLCU_Reg.srg in the folder \Storage Card\. These files can be used at a later time to restore the registry.

Return value: bool --> true = success; false = failed

Restore backup

`bool RestoreRegistryBackup()`

Description:

This function restores the registry from the files Save_HKLM_Reg.srg and Save_HKLCU_Reg.srg in the folder \Storage Card\. Afterwards a restart is carried out automatically. If the backup files are not present, then the function returns the return value flase.

Return value: bool --> true = this never happens because a soft reset is performed; false = failed

Watchdog & Reset

Soft reset

`void SoftReset()`

WEC2013 Debugging

1. Enable connection to WEC2013 device via Telnet. DH electronics recommends PuTTY for Telnet connection.

Note: PuTTY can be downloaded from www.heise.de

COM iMX6 WinCE

Contents

FAQ

WEC7 Tools

CE Remote Display Application

Binary BSP user guide

WEC7 DHHalLib (function library)

Version numbers

GPIO

I2C

SPI

Physical Memory

KITL

Backlight

Touch screen

Registry

Watchdog & Reset

WEC2013 Debugging

Navigation menu

Page actions

Page actions

Personal tools

Navigation

Search

Tools