|
green text
body { font-size: larger; }
- STM32MP157AAC
- 2x ARM® Cortex-A7 up to 650 MHz
- 1x ARM® Cortex-M4 up to 200 MHz
- 2D/3D graphics accelerator
- 0 - 512 MByte NAND flash memory (8 bit bus width) or 2 - 16 GByte eMMC flash
- 2 MB SPI boot flash
- 256 - 2048 MByte DDR3-1066 or DDR3-800
- On-board microSD card socket
- SD/MMC card interface, 4 bit SDIO
- LC display controller, 24 bit colors, 2048x1536 pixels
- LVDS 4-channel, max. 165 Mpixels/s
- On-board touch controller for 4-wire resistive touch screens
- Ethernet controller 10/100 Mbit, IEEE1588 conform
- USB 2.0 OTG high-speed
- USB 2.0 host high speed
- Full function UART
- Standard UART with hardware handshake support
- Standard UART
|
- CAN interface
- 2 x SPI interface
- 2 x I2CTM interface
- I²S Audio codec (1 x microphone, 1 x Line in, 1x Line out)
- Real-time clock (I2CTM connection), low power temperature compensated
- 12 bit analog input
- 1 kbit EEPROM with integrated MAC address
- 16 bit address/databus interface on SODIMM-200 socket
- PWM channel
- 23 GPIOs
- JTAG debug connection via FFC plug connector
- Industrial temperature range (-40°C to +85°C)
- SODIMM-200 socket with DHCOM pin assignment
|
