The DHSBC STM32MP13x board is the official DHCOR STM32MP13 reference design!
Introduction
Reference design for secure industrial IoT devices based on STM32MP13x
- Single Board Computer based on the solderable DHCOR STM32MP13
- Compatible with accessories from the Raspberry Pi© community
- Highlights: Bluetooth / WiFi, Dual GB Ethernet, Secure Boot, OP-TEE support
- Trusted Platform Module 2.0 available on request
- Mainline Linux support and active software maintenance
- Industrial product design with CE certification
- Guaranteed long-term availability of 10+ years
Technical Details
|
|
|
- STM32MP135F
- 1x ARM® Cortex-A7 up to 1 GHz
- PMIC STPMIC1D
- DDR3 DRAM 1024 Mbyte @ 533 MHz
- eMMC Flash 8 Gbyte
- NOR Flash 4 Mbyte, Quad SPI interface
- EEPROM 4 kbyte
- RTC temp. compensated RV-3032-C7
- USB Host 1x type A, 2.0 high-speed
- USB Device 1x Type-C, 2.0 high-speed
- WiFi / Bluetooth
- WiFi 2.4GHz IEEE 802.11b / g / n
- Bluetooth® v5.2 (BR/EDR/BLE)
- Antenna: U-FL connector
- Ethernet 10 / 100 / 1000 Mbit/s, IEEE 802.3-compliant
|
- TPM (Trusted Platform Module)2.0 device ST33TPHF2XSPI
- Push-Buttons Power and reset
- Battery Socket CR1216, CR1220 and CR1225
- Boot Mode 3 bit boot mode switch
- Debug Interface JTAG interface via tag-connect
- Supply (SYS_DCIN) 8 - 18 VDC
- Temperature Range 0 - 40 °C
- Dimensions 100 x 85 mm
- Raspberry Pi 40-pin Expansion
- 2 x UART
- 1 x I2C
- 1 x I2S
- 1 x SPI
- 2 x PWM
- 2 x CAN
- up to 28 x GPIOs
|
Product Change Notifications (PCN)
DHCOR STM32MP13
