COM iMX25 Hardware

Hardware Errata

  VCC_BAT errata: 
    Description: If VCC_BAT does not go down to 0V the processor may hang during power-on cycle.
    Workaround: Don't connect a battery or a gold cap to the VCC_BAT pin (pin 200) on the SODIMM-200 connector. In addition to that you can't buffer the date and time information.
  Affected serial numbers:
    1164AA KA11.0328 ... (DH HW Version 406-200)
    11641A KA11.0328 ... (DH HW Version 406-200)

  SPI Flash errata:
    Description: Boot from SPI Flash is not possible, because the wrong CS is connected to the serial flash memory.
    Workaround: -
  Affected serial numbers:
    1164AA KA11.0328 ... (DH HW Version 406-200)
    11641A KA11.0328 ... (DH HW Version 406-200)

  UART1 CTS and RTS errata:
    Description: DHCOM UART1_CTS and UART1_RTS inverted.
    Workaround: Don't use hardware flow control.
  Affected serial numbers:
    1164AA KA11.0328 ... (DH HW Version 406-200)
    11641A KA11.0328 ... (DH HW Version 406-200)
    51112... (DH HW Version 406-200)
    50112... (DH HW Version 406-200)

SD interface wire length

The max. wire length from the SODIMM-200 connector to the SD Card Slot is 80mm (without buffer).

Released MicroSD Cards

ATP AF128UDI141313M82LTAAS-10	128MB	Industrial Card
Delkin SD128HSSD-S2047-B	128MB	Industrial Card
ATP AF1GUDI261313M82LTAAS-10	1GB	Industrial Card
Delkin SD01GHSSD-S2047-B	1GB	Industrial Card
ATP AF2GUDI461313M82LTAAS-10	2GB	Industrial Card
Transcend TS2GUSD		2GB	No industrial Card