Avenger96: Difference between revisions

From Wiki-DB
Jump to navigationJump to search
Line 28: Line 28:
**1x ARM® Cortex-M4 up to 200 MHz  
**1x ARM® Cortex-M4 up to 200 MHz  
'''
'''
* 2D/3D graphics accelerator
*'''GPU''' 1x 3D GPU Vivante®  @ 533 MHz - OpenGL® ES 2.0
* 0 - 512 MByte NAND flash memory (8 bit bus width) or 2 - 16 GByte eMMC flash
*'''PMIC''' STPMIC1A
* 2 MB SPI boot flash
*'''DDR3 DRAM''' 1024 Mbyte  @ 533 MHz
* 256 - 2048 MByte DDR3-1066 or DDR3-800
*'''eMMC Flash''' 8 Gbyte, v4.51 interface
* On-board microSD card socket
*'''NOR Flash''' 2 Mbyte, Quad SPI interface
* SD/MMC card interface, 4 bit SDIO
*'''EEPROM''' 128 byte
* LC display controller, 24 bit colors, 2048x1536 pixels
*'''microSD Socket''' UHS-I speed grade, v3.01
* LVDS 4-channel, max. 165 Mpixels/s
*'''USB Host''' 2x type A, 2.0 high-speed
* On-board touch controller for 4-wire resistive touch screens
*'''USB OTG''' 1x type micro-AB, 2.0 high-speed
* Ethernet controller 10/100 Mbit, IEEE1588 conform
*'''HDMI''' WXGA (1366x768) @ 60 fps, HDMI 1.4
* USB 2.0 OTG high-speed
*'''WiFi / Bluetooth'''
* USB 2.0 host high speed
**WiFi 5 GHz & 2.4GHz IEEE 802.11a / b / g / n / ac
* Full function UART
**Bluetooth® v4.2 (BR/EDR/BLE)
* Standard UART with hardware handshake support
**PCB antenna
* Standard UART
*'''Ethernet''' 10 / 100 / 1000 Mbit/s, IEEE 802.3-compliant
|valign="top" style="border: 0pt;" |  
|valign="top" style="border: 0pt;" |
* CAN interface
*'''Push-Buttons''' Power and reset
* 2 x SPI interface
*'''Battery Socket''' CR1216, CR1220 and CR1225
* 2 x I2CTM interface
*''''''
* I²S Audio codec (1 x microphone, 1 x Line in, 1x Line out)
*''''''
* Real-time clock (I2CTM connection), low power temperature compensated
*''''''
* 12 bit analog input
*''''''
* 1 kbit EEPROM with integrated MAC address
*''''''
* 16 bit address/databus interface on SODIMM-200 socket
*''''''
* PWM channel
*''''''
* 23 GPIOs
*''''''
* JTAG debug connection via FFC plug connector
*''''''
* Industrial temperature range (-40°C to +85°C)
* SODIMM-200 socket with DHCOM pin assignment
|}
|}



Revision as of 11:07, 21 February 2019

COM Avenger96Board

Introduction

The AVENGER Board is a 96Boards compliant consumer edition board based on the STM32MP15 series of SoCs. The STM32MP15 series is a highly integrated multi-market applications processor designed to enable secure and portable applications within the Internet of Things. AVENGER board features Dual-core Arm® Cortex®-A7 processors operating at up to 650 Hz, Single core Arm® Cortex® M4 operating up to 200 MHz. In addition, an extensive set of interfaces and connectivity peripherals are included to interface to cameras, touch-screen displays, MMC/SD cards and media processor engine. It also fully supports wireless communication, including WLAN and BLE.

Hardware

  • STM32MP157AAC
    • 2x ARM® Cortex-A7 up to 650 MHz
    • 1x ARM® Cortex-M4 up to 200 MHz

  • GPU 1x 3D GPU Vivante® @ 533 MHz - OpenGL® ES 2.0
  • PMIC STPMIC1A
  • DDR3 DRAM 1024 Mbyte @ 533 MHz
  • eMMC Flash 8 Gbyte, v4.51 interface
  • NOR Flash 2 Mbyte, Quad SPI interface
  • EEPROM 128 byte
  • microSD Socket UHS-I speed grade, v3.01
  • USB Host 2x type A, 2.0 high-speed
  • USB OTG 1x type micro-AB, 2.0 high-speed
  • HDMI WXGA (1366x768) @ 60 fps, HDMI 1.4
  • WiFi / Bluetooth
    • WiFi 5 GHz & 2.4GHz IEEE 802.11a / b / g / n / ac
    • Bluetooth® v4.2 (BR/EDR/BLE)
    • PCB antenna
  • Ethernet 10 / 100 / 1000 Mbit/s, IEEE 802.3-compliant
  • Push-Buttons Power and reset
  • Battery Socket CR1216, CR1220 and CR1225
  • '
  • '
  • '
  • '
  • '
  • '
  • '
  • '
  • '

Downloads

Documents