The Avenger96 board is the official DHCOR STM32MP1 reference design!
The AVENGER Board is a 96Boards compliant consumer edition board based on the STM32MP15 series of SoCs. The STM32MP15 series is a highly integrated multi-market applications processor designed to enable secure and portable applications within the Internet of Things. AVENGER board features Dual-core Arm® Cortex®-A7 processors operating at up to 650 MHz, Single core Arm® Cortex® M4 operating up to 209 MHz. In addition, an extensive set of interfaces and connectivity peripherals are included to interface to cameras, touch-screen displays, MMC/SD cards and media processor engine. It also fully supports wireless communication, including WLAN and BLE.
- Avenger96 588-200 Getting-Started R03
- NEW DHCOR STM32MP1 User Manual R05 IMPORTANT: Please have a look at NEW chapter 24. Hardware design checklist
- NOTE: Please also have a look at the STM32 MPU wiki: Links
- Avenger96 Schematic
- Avenger96 Bill of Material
- Avenger96 Assembly Top
- Avenger96 Assembly Bottom
- Avenger96 3D STEP file
- DHCOR STM32MP1 Allegro/Orcad schematic and layout symbols (release date: 16.10.2019) Now with Allegro *.brd file and 3D information
- DHCOR STM32MP1 3D STEP file
- Avenger96 CubeMX configuration (release date: 03.05.2019)
DH Mainline based Linux
- - The Mainline based Linux offers Etnaviv GPU driver support!!!
- - Based on kernel 5.10.x and Yocto version dunfell
- Yocto meta layer --> Github
- NEW DH Mainline based Starter Image 2021-10-21 (based on 5.10 kernel)
- Linux and bootloader documentation
- NEW How to start with custom DHCOR design?
- The patch below is an example patch which applies on top of u-boot v2021.01 and implements a custom board derived from 3V3 option of DHCOR STM32MP1 SoM. That's pretty much all you have to change to implement the board. But, please tweak the DTs esp. where there are the FIXME comments.
- NEW 0001-ARM-dts-stm32-Add-DHCOR-based-FOO-board-u-boot-v2021.01.patch
!!! This project NOT maintained from DH electronics!!! --> Please use the "DH Mainline based Linux" version for your project. The OpenSTLinux should only be used for testing
- - Based on OpenSTLinux v2.1
- - GPU support based on original vivante GPU driver.
- - Based on kernel 5.4.x and Yocto version dunfell
- DH electronics Github contains the meta-av96 layer for ST SDK. Please see readme.txt which describes the build process.
- OpenSTLinux-3.0 based on Yocto Dunfell LTS and Linux 5.10.10 - v7.0 Starter Image (Supported by Arrow Electronics)
- Starter Image Changelog
- This Image includes four different bootmodes to support some additional mezzanine boars. Click here to learn, how to change them.
- X-LINUX-AI OpenSTLinux Expansion Package: Description: Expansion Package that targets artificial intelligence for STM32MP1 Series devices.
- NEW X-LINUX-AI OpenSTLinux Expansion Package
- NEW How to install X-LINUX-AI v2.0.0 on Avenger96 board
SPI Flash and eMMC Image Programming
Mezzanine Boards by DH electronics
DSI Display Adaptor Board
You can easily add an DSI display to your Avenger96 with the help of the DSI Display Adaptor Board. The display can be activated easily on our Mainline Image with a device tree overlay as described here. To get one of the boards, simply reach out to us and we'll prepare one for you.