|
|
| (10 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| == FAQ == | | == Downloads == |
| == Hardware Errata ==
| | :* [[media:DHCOM_schematic_symbol_R01.zip|Download schematic symbols for DHCOM SODIMM-200 and display adaptor connector]] |
| Version 406-200:
| |
| Affected serial numbers:
| |
| 1164AA KA11.0328 ...
| |
| 11641A KA11.0328 ...
| |
| VCC_BAT errata:
| |
| Description: If VCC_BAT does not go down to 0V the processor may hang during a power-on cycle.
| |
| Workaround: Don't connect a battery or a gold cap to the VCC_BAT pin (pin 200) on the SODIMM-200 connector. In addition to that you can't buffer the date and time information.
| |
| SPI Flash errata:
| |
| Description: Boot from SPI Flash is not possible, because the wrong CS is connected to the serial flash memory.
| |
| Workaround: -
| |
|
| |
|
| == SD interface wire length == | | == Available Documents from Freescale == |
| The max. wire length from the SODIMM-200 connector to the SD Card Slot is 80mm (without buffer).
| |
| == Released MicroSD Cards ==
| |
|
| |
|
| ATP AF128UDI141313M82LTAAS-10 128MB Industrial Card
| | [http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX255 Productoverview i.MX25 at Freescale Website] |
| Delkin SD128HSSD-S2047-B 128MB Industrial Card
| |
| ATP AF1GUDI261313M82LTAAS-10 1GB Industrial Card
| |
| Delkin SD01GHSSD-S2047-B 1GB Industrial Card
| |
| ATP AF2GUDI461313M82LTAAS-10 2GB Industrial Card
| |
| Transcend TS2GUSD 2GB No industrial Card
| |
Latest revision as of 08:54, 23 December 2021
