DRC02: Difference between revisions

From Wiki-DB
Jump to navigationJump to search
(Created page with "{| | | |- |__TOC__ |600px|DHCON DRC02 |} == Introduction == The AVENGER Board is a 96Boards compliant consumer edition board based on th...")
 
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 8: Line 8:


== Introduction ==
== Introduction ==
The AVENGER Board is a 96Boards compliant consumer edition board based on the STM32MP15 series of SoCs. The STM32MP15 series
Our DHCON products are optimized for smart home & building as well as Industry 4.0 and IoT applications.
is a highly integrated multi-market applications processor designed to enable secure and portable applications within the Internet of Things.  
 
AVENGER board features Dual-core Arm® Cortex®-A7 processors operating at up to 650 Hz, Single core Arm® Cortex® M4 operating up to
Why should you build on our DHCON products?
209 MHz. In addition, an extensive set of interfaces and connectivity peripherals are included to interface to cameras, touch-screen displays,
 
MMC/SD cards and media processor engine. It also fully supports wireless communication, including WLAN and BLE.
Individual IoT edge solutions – made easy
Highest flexibility as Docker or LXC host
Lowest power – built-in security
Available for 10+ years


== Technical Details ==
== Technical Details ==
Line 21: Line 24:
|-
|-
|valign="top" style="border: 0pt;" |  
|valign="top" style="border: 0pt;" |  
* '''STM32MP157AAC
* '''Standard with DHCOM i.MX6 Solo (other module optional)
**2x ARM® Cortex-A7 up to 650 MHz
*'''BSPs''' Linux, Android, WinCE
**1x ARM® Cortex-M4 up to 209 MHz
*'''Ethernet''' 2 x 10/100 Mbps
'''
*'''USB''' 2 x Host 2.0
*'''GPU''' 1x 3D GPU Vivante®  @ 533 MHz - OpenGL® ES 2.0
*'''Serial''' 1 x RS232 (isolated), 1  x RS485 (isolated)
*'''PMIC''' STPMIC1A
*'''SD-Card''' 4-bit micro SD-card
*'''DDR3 DRAM''' 1024 Mbyte  @ 533 MHz
*'''CAN''' 1 x CAN (up to 1MBaud) on IN-RAIL, 1 x CAN (up to 1MBaud) isolated
*'''eMMC Flash''' 8 Gbyte, v4.51 interface
*'''Display''' 1,3 inch OLED, 128 x 64 pixels, 30.000h MTBF
*'''NOR Flash''' 2 Mbyte, Quad SPI interface
*'''Buttons''' 5 capacitive touch buttons
*'''EEPROM''' 128 byte
*'''LEDs''' 4 programmable status LEDs
*'''microSD Socket''' UHS-I speed grade, v3.01
*'''Inputs''' 2 x opto couplper isolated
*'''USB Host''' 2x type A, 2.0 high-speed
*'''Outputs''' 2 x open collector
*'''USB OTG''' 1x type micro-AB, 2.0 high-speed
*'''Extension interface''' internal extension interface for additional interfaces
*'''HDMI''' WXGA (1366x768) @ 60 fps, HDMI 1.4
*'''Power Supply''' 24VDC
*'''WiFi / Bluetooth'''  
*'''RTC''' Battery CR2032
**WiFi 5 GHz & 2.4GHz IEEE 802.11a / b / g / n / ac
*'''Cooling''' Fanless
**Bluetooth® v4.2 (BR/EDR/BLE)
*'''Temperature range''' 0 up to +50°C
**PCB antenna
*'''Dimensions''' 107,8 x 89,8 x 53 [mm]
*'''Ethernet''' 10 / 100 / 1000 Mbit/s, IEEE 802.3-compliant
*'''Certifications'''  EN61131, EN61000-6-2, EN61000-6-3
|valign="top" style="border: 0pt;" |
*'''Push-Buttons''' Power and reset
*'''Battery Socket''' CR1216, CR1220 and CR1225
*'''LEDs'''
**4x green user controlled LEDs
**1x blue Bluetooth enabled
**1x yellow WiFi enabled
**1x red power supply okay
*'''Boot Mode''' 3 bit boot mode switch
*'''Debug Interface''' JTAG interface via tag-connect
*'''Supply (SYS_DCIN)''' 8 - 18 VDC
*'''Temperature Range''' 0 - 40 °C
*'''Dimensions ''' 100 x 85 mm
*'''Serial Peripherals'''   
**2 x UART
**2 x I2C
**1 x I2S
**1 x SPI
**1 x GPIOs
|}
|}


== Downloads ==
== Downloads ==
==== Documents ====
==== Documents ====
* [https://www.dropbox.com/s/nl15j510syvtxc7/DOC_Getting-Started-588-100_R06_2019-04-12.pdf?dl=0 Getting-Started]
*'''[[media:Datasheet_DRC02.pdf|DRC02 datasheet]]'''
 
==== DHCOR STM32MP1 schematic and layout symbols ====
* [https://www.dropbox.com/s/kssfu3ntov7t5t5/DHCOR-STM32MP1-Design-Symbols_2019-04-11_2.zip?dl=0 DHCOR STM32MP1 Allegro/Orcad symbols]
 
==== DHCOR STM32MP1 STM CubeMX configuration ====
* [https://www.dropbox.com/s/b5sfk6obirhdeds/DHCOR-PinMux-TFBGA361-Avenger96-HW200_2019-04-05.zip?dl=0 Avegner96 CubeMX configuration]


==== Binary package ====
*'''[[media:USM_Bedienungsanleitung_DRC02_R01_2019-03-18.pdf|DRC02 usermanual german]]'''
* [https://www.dropbox.com/s/6w7iqqos5zpveap/Avenger96_v1.2_binary_deploy.zip?dl=0 Avenger96 v1.2 binary package for eMMC programming]


==== Yocto meta layer ====
*'''[[media:USM_DRC02-EN_R02.pdf|DRC02 usermanual englisch]]'''
* [https://www.dropbox.com/s/maau78tpg8tf09e/meta-av96.thud.5fe50075_2019-04-25.zip?dl=0 Yocto meta layer (based on v2.0.2 image from 2019-04-25)]
The package contains the new meta-av96 layer for the ST v1.0.0 SDK. Please see readme.txt which describes the build process.


==== Images====
==== Images====
* [https://www.dropbox.com/s/wm1faek37u8c9v9/Avenger96_v2.0.2_2019-04-25.zip?dl=0 Avenger96 v2.0.2 Starter Image]

Latest revision as of 08:46, 3 May 2019

DHCON DRC02

Introduction

Our DHCON products are optimized for smart home & building as well as Industry 4.0 and IoT applications.

Why should you build on our DHCON products?

Individual IoT edge solutions – made easy Highest flexibility as Docker or LXC host Lowest power – built-in security Available for 10+ years

Technical Details

  • Standard with DHCOM i.MX6 Solo (other module optional)
  • BSPs Linux, Android, WinCE
  • Ethernet 2 x 10/100 Mbps
  • USB 2 x Host 2.0
  • Serial 1 x RS232 (isolated), 1 x RS485 (isolated)
  • SD-Card 4-bit micro SD-card
  • CAN 1 x CAN (up to 1MBaud) on IN-RAIL, 1 x CAN (up to 1MBaud) isolated
  • Display 1,3 inch OLED, 128 x 64 pixels, 30.000h MTBF
  • Buttons 5 capacitive touch buttons
  • LEDs 4 programmable status LEDs
  • Inputs 2 x opto couplper isolated
  • Outputs 2 x open collector
  • Extension interface internal extension interface for additional interfaces
  • Power Supply 24VDC
  • RTC Battery CR2032
  • Cooling Fanless
  • Temperature range 0 up to +50°C
  • Dimensions 107,8 x 89,8 x 53 [mm]
  • Certifications EN61131, EN61000-6-2, EN61000-6-3

Downloads

Documents

Images