Display Adapter 448-200 Data Image Display: Difference between revisions

From Wiki-DB
Jump to navigationJump to search
No edit summary
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 5: Line 5:
   In order to use the display correctly you have to install the machting display settings on your Bootloader.
   In order to use the display correctly you have to install the machting display settings on your Bootloader.


===You can find the settings here:===
<ul>
<li> Use the following settings for following EVA-Kits: Serial Numbers: DHeva01 431100001...431100012 and DHeva01 051210001...051210025</li>
[[media:01_DataImage_4_3inch_FG040360DSSWBG03.zip|Settings DataImage 4,3" Display (FG040360DSSWBG03) (for U-Boot Version v1.11.2.0 or higher)]


===Hardware===


'''[[How to connect the 4.3" adaptor the the EVA-Board]]'''


===Hardware===


'''[[How to connect the adaptor the the EVA-Board]]'''
===Software===
Use the following settings for following EVA-Kits: Serial Numbers: '''DHeva01 431100001...431100012''' and '''DHeva01 051210001...051210025'''
 
[[media:01_DataImage_4_3inch_FG040360DSSWBG03.zip|Settings DataImage 4,3" Display (FG040360DSSWBG03) (for U-Boot Version v1.11.2.0 or higher)]]

Latest revision as of 08:09, 10 May 2012

Display Adapter 4.3"


 The display adapter 448-200 was designed to connect a 4.3" display from data image to the DH development kit.
 In order to use the display correctly you have to install the machting display settings on your Bootloader.


Hardware

How to connect the 4.3" adaptor the the EVA-Board


Software

Use the following settings for following EVA-Kits: Serial Numbers: DHeva01 431100001...431100012 and DHeva01 051210001...051210025

Settings DataImage 4,3" Display (FG040360DSSWBG03) (for U-Boot Version v1.11.2.0 or higher)