Difference between revisions of "First Steps"

From Wiki-DB
Jump to navigation Jump to search
Line 1: Line 1:
# Insert DHCOM-Module
+
<ol>
 +
<li>  Insert DHCOM-Module </li>
  
  [[File:InsertModule.png]]
 
  
# Connect RS232
+
[[File:InsertModule.png]]
  
   [[File:ConnectRs232.png]]
+
<li> Connect RS232 </li>
 +
    
 +
[[File:ConnectRs232.png]]
  
# Set terminal programm (e.g. Tera Term)
+
<li> Set terminal programm (e.g. Tera Term) </li>
 +
 
 +
  Terminal settings:
 +
  Port: depending on your host
 +
  Baud rate: 38400
 +
  Data: 8 bit
 +
  Parity: none
 +
  Stop: 1 bit
 +
 
 +
  Flow Control: none
 +
  (Follow the link to download tera term: [http://www.heise.de/download/teraterm-pro.html
 +
  Tera Term Download]
  
# Connect Display-Adaptor
+
<li> Connect Display-Adaptor </li>
 +
 
 +
[[File:ConnectDisplay.png]] or [[File:ConnectDisplay43.png]]
  
  [[File:ConnectDisplay.png]]
+
<li> Connect power supply </li>
 
+
 
# Connect power supply
+
[[File:PowerSupply.png]]
 
 
  [[File:PowerSupply.png]]
 

Revision as of 06:45, 10 May 2012

  1. Insert DHCOM-Module
  2. Error creating thumbnail: Unable to save thumbnail to destination
  3. Connect RS232
  4. Error creating thumbnail: Unable to save thumbnail to destination
  5. Set terminal programm (e.g. Tera Term)
  6. Terminal settings: Port: depending on your host Baud rate: 38400 Data: 8 bit Parity: none Stop: 1 bit Flow Control: none (Follow the link to download tera term: [http://www.heise.de/download/teraterm-pro.html Tera Term Download]
  7. Connect Display-Adaptor
  8. Error creating thumbnail: Unable to save thumbnail to destination
    or
    Error creating thumbnail: Unable to save thumbnail to destination
  9. Connect power supply
  10. Error creating thumbnail: Unable to save thumbnail to destination