DHCOM STM32MP1 Yocto

From Wiki-DB
Jump to navigation Jump to search

For general information about the Yocto Project please refer to the official Website. "Yocto is not an embedded Linux distribution – it creates a custom one for you." This says that if you are using Yocto to build your system image you are the distributor. If you're not aware of what this means for you please contact us.

Requirements hardware and software

  • Linux-based (Debian/Ubuntu is recommended) host system to use for building Linux/Yocto
  • min 4GB RAM / > 8GB RAM are recommended
  • disk space (depending on image to build about 80 GB)
  • a microSD card-reader to write the generated image to the microSD card

Supported Stable Branch

With our OpenEmbedded / Yocto BSP Layer for DHCOM STM32MP1 we support the following branches:

Name Version
Zeus (deprecated) 3.0
Dunfell 3.1


Setup Yocto Build System & Build Image

Please refer to the build instructions in the repository README.

Name
Zeus (deprecated)
Dunfell

Example Configurations