|
|
| (2 intermediate revisions by the same user not shown) |
| Line 8: |
Line 8: |
|
| |
|
| == Introduction == | | == Introduction == |
| The AVENGER Board is a 96Boards compliant consumer edition board based on the STM32MP15 series of SoCs. The STM32MP15 series
| | Our DHCON products are optimized for smart home & building as well as Industry 4.0 and IoT applications. |
| is a highly integrated multi-market applications processor designed to enable secure and portable applications within the Internet of Things.
| | |
| AVENGER board features Dual-core Arm® Cortex®-A7 processors operating at up to 650 Hz, Single core Arm® Cortex® M4 operating up to
| | Why should you build on our DHCON products? |
| 209 MHz. In addition, an extensive set of interfaces and connectivity peripherals are included to interface to cameras, touch-screen displays,
| | |
| MMC/SD cards and media processor engine. It also fully supports wireless communication, including WLAN and BLE.
| | Individual IoT edge solutions – made easy |
| | Highest flexibility as Docker or LXC host |
| | Lowest power – built-in security |
| | Available for 10+ years |
|
| |
|
| == Technical Details == | | == Technical Details == |
| Line 21: |
Line 24: |
| |- | | |- |
| |valign="top" style="border: 0pt;" | | | |valign="top" style="border: 0pt;" | |
| * '''STM32MP157AAC | | * '''Standard with DHCOM i.MX6 Solo (other module optional) |
| **2x ARM® Cortex-A7 up to 650 MHz
| | *'''BSPs''' Linux, Android, WinCE |
| **1x ARM® Cortex-M4 up to 209 MHz
| | *'''Ethernet''' 2 x 10/100 Mbps |
| '''
| | *'''USB''' 2 x Host 2.0 |
| *'''GPU''' 1x 3D GPU Vivante® @ 533 MHz - OpenGL® ES 2.0
| | *'''Serial''' 1 x RS232 (isolated), 1 x RS485 (isolated) |
| *'''PMIC''' STPMIC1A | | *'''SD-Card''' 4-bit micro SD-card |
| *'''DDR3 DRAM''' 1024 Mbyte @ 533 MHz | | *'''CAN''' 1 x CAN (up to 1MBaud) on IN-RAIL, 1 x CAN (up to 1MBaud) isolated |
| *'''eMMC Flash''' 8 Gbyte, v4.51 interface | | *'''Display''' 1,3 inch OLED, 128 x 64 pixels, 30.000h MTBF |
| *'''NOR Flash''' 2 Mbyte, Quad SPI interface | | *'''Buttons''' 5 capacitive touch buttons |
| *'''EEPROM''' 128 byte | | *'''LEDs''' 4 programmable status LEDs |
| *'''microSD Socket''' UHS-I speed grade, v3.01 | | *'''Inputs''' 2 x opto couplper isolated |
| *'''USB Host''' 2x type A, 2.0 high-speed | | *'''Outputs''' 2 x open collector |
| *'''USB OTG''' 1x type micro-AB, 2.0 high-speed
| | *'''Extension interface''' internal extension interface for additional interfaces |
| *'''HDMI''' WXGA (1366x768) @ 60 fps, HDMI 1.4
| | *'''Power Supply''' 24VDC |
| *'''WiFi / Bluetooth''' | | *'''RTC''' Battery CR2032 |
| **WiFi 5 GHz & 2.4GHz IEEE 802.11a / b / g / n / ac
| | *'''Cooling''' Fanless |
| **Bluetooth® v4.2 (BR/EDR/BLE)
| | *'''Temperature range''' 0 up to +50°C |
| **PCB antenna
| | *'''Dimensions''' 107,8 x 89,8 x 53 [mm] |
| *'''Ethernet''' 10 / 100 / 1000 Mbit/s, IEEE 802.3-compliant | | *'''Certifications''' EN61131, EN61000-6-2, EN61000-6-3 |
| |valign="top" style="border: 0pt;" |
| |
| *'''Push-Buttons''' Power and reset | |
| *'''Battery Socket''' CR1216, CR1220 and CR1225 | |
| *'''LEDs''' | |
| **4x green user controlled LEDs
| |
| **1x blue Bluetooth enabled
| |
| **1x yellow WiFi enabled
| |
| **1x red power supply okay
| |
| *'''Boot Mode''' 3 bit boot mode switch | |
| *'''Debug Interface''' JTAG interface via tag-connect | |
| *'''Supply (SYS_DCIN)''' 8 - 18 VDC | |
| *'''Temperature Range''' 0 - 40 °C | |
| *'''Dimensions ''' 100 x 85 mm | |
| *'''Serial Peripherals''' | |
| **2 x UART
| |
| **2 x I2C
| |
| **1 x I2S
| |
| **1 x SPI
| |
| **1 x GPIOs
| |
| |} | | |} |
|
| |
|
| == Downloads == | | == Downloads == |
| ==== Documents ==== | | ==== Documents ==== |
| * [https://www.dropbox.com/s/nl15j510syvtxc7/DOC_Getting-Started-588-100_R06_2019-04-12.pdf?dl=0 Getting-Started] | | *'''[[media:Datasheet_DRC02.pdf|DRC02 datasheet]]''' |
| | |
| ==== DHCOR STM32MP1 schematic and layout symbols ====
| |
| * [https://www.dropbox.com/s/kssfu3ntov7t5t5/DHCOR-STM32MP1-Design-Symbols_2019-04-11_2.zip?dl=0 DHCOR STM32MP1 Allegro/Orcad symbols]
| |
| | |
| ==== DHCOR STM32MP1 STM CubeMX configuration ====
| |
| * [https://www.dropbox.com/s/b5sfk6obirhdeds/DHCOR-PinMux-TFBGA361-Avenger96-HW200_2019-04-05.zip?dl=0 Avegner96 CubeMX configuration]
| |
|
| |
|
| ==== Binary package ====
| | *'''[[media:USM_Bedienungsanleitung_DRC02_R01_2019-03-18.pdf|DRC02 usermanual german]]''' |
| * [https://www.dropbox.com/s/6w7iqqos5zpveap/Avenger96_v1.2_binary_deploy.zip?dl=0 Avenger96 v1.2 binary package for eMMC programming] | |
|
| |
|
| ==== Yocto meta layer ====
| | *'''[[media:USM_DRC02-EN_R02.pdf|DRC02 usermanual englisch]]''' |
| * [https://www.dropbox.com/s/maau78tpg8tf09e/meta-av96.thud.5fe50075_2019-04-25.zip?dl=0 Yocto meta layer (based on v2.0.2 image from 2019-04-25)] | |
| The package contains the new meta-av96 layer for the ST v1.0.0 SDK. Please see readme.txt which describes the build process.
| |
|
| |
|
| ==== Images==== | | ==== Images==== |
| * [https://www.dropbox.com/s/wm1faek37u8c9v9/Avenger96_v2.0.2_2019-04-25.zip?dl=0 Avenger96 v2.0.2 Starter Image]
| |
Introduction
Our DHCON products are optimized for smart home & building as well as Industry 4.0 and IoT applications.
Why should you build on our DHCON products?
Individual IoT edge solutions – made easy
Highest flexibility as Docker or LXC host
Lowest power – built-in security
Available for 10+ years
Technical Details
|
|
|
- Standard with DHCOM i.MX6 Solo (other module optional)
- BSPs Linux, Android, WinCE
- Ethernet 2 x 10/100 Mbps
- USB 2 x Host 2.0
- Serial 1 x RS232 (isolated), 1 x RS485 (isolated)
- SD-Card 4-bit micro SD-card
- CAN 1 x CAN (up to 1MBaud) on IN-RAIL, 1 x CAN (up to 1MBaud) isolated
- Display 1,3 inch OLED, 128 x 64 pixels, 30.000h MTBF
- Buttons 5 capacitive touch buttons
- LEDs 4 programmable status LEDs
- Inputs 2 x opto couplper isolated
- Outputs 2 x open collector
- Extension interface internal extension interface for additional interfaces
- Power Supply 24VDC
- RTC Battery CR2032
- Cooling Fanless
- Temperature range 0 up to +50°C
- Dimensions 107,8 x 89,8 x 53 [mm]
- Certifications EN61131, EN61000-6-2, EN61000-6-3
|
Downloads
Documents
Images
