Avenger96

The Avenger96 board is the official DHCOR STM32MP1 reference design!

Introduction

The AVENGER Board is a 96Boards compliant consumer edition board based on the STM32MP15 series of SoCs. The STM32MP15 series is a highly integrated multi-market applications processor designed to enable secure and portable applications within the Internet of Things. AVENGER board features Dual-core Arm® Cortex®-A7 processors operating at up to 650 MHz, Single core Arm® Cortex® M4 operating up to 209 MHz. In addition, an extensive set of interfaces and connectivity peripherals are included to interface to cameras, touch-screen displays, MMC/SD cards and media processor engine. It also fully supports wireless communication, including WLAN and BLE.

Technical Details

STM32MP157AAC 2x ARM® Cortex-A7 up to 650 MHz 1x ARM® Cortex-M4 up to 209 MHz GPU 1x 3D GPU Vivante® @ 533 MHz - OpenGL® ES 2.0 PMIC STPMIC1A DDR3 DRAM 1024 Mbyte @ 533 MHz eMMC Flash 8 Gbyte, v4.51 interface NOR Flash 2 Mbyte, Quad SPI interface EEPROM 128 byte microSD Socket UHS-I speed grade, v3.01 USB Host 2x type A, 2.0 high-speed USB OTG 1x type micro-AB, 2.0 high-speed HDMI WXGA (1366x768) @ 60 fps, HDMI 1.4 WiFi / Bluetooth WiFi 5 GHz & 2.4GHz IEEE 802.11a / b / g / n / ac Bluetooth® v4.2 (BR/EDR/BLE) PCB antenna Ethernet 10 / 100 / 1000 Mbit/s, IEEE 802.3-compliant

Push-Buttons Power and reset Battery Socket CR1216, CR1220 and CR1225 LEDs 4x green user controlled LEDs 1x blue Bluetooth enabled 1x yellow WiFi enabled 1x red power supply okay Boot Mode 3 bit boot mode switch Debug Interface JTAG interface via tag-connect Supply (SYS_DCIN) 8 - 18 VDC Temperature Range 0 - 40 °C Dimensions 100 x 85 mm Serial Peripherals 2 x UART 2 x I2C 1 x I2S 1 x SPI 1 x GPIOs

Documentation

• Avenger96 588-200 Getting-Started R03
• NEW DHCOR STM32MP1 User Manual R05 IMPORTANT: Please have a look at NEW chapter 24. Hardware design checklist

NOTE: Please also have a look at the STM32 MPU wiki: Links

Design Files

• Avenger96 Schematic
• Avenger96 Bill of Material
• Avenger96 Assembly Top
• Avenger96 Assembly Bottom
• Avenger96 3D STEP file
• DHCOR STM32MP1 Allegro/Orcad schematic and layout symbols (release date: 16.10.2019) Now with Allegro *.brd file and 3D information
• DHCOR STM32MP1 3D STEP file
• Avenger96 CubeMX configuration (release date: 03.05.2019)

Software

DH Mainline based Linux

Notes:

- The Mainline based Linux offers Etnaviv GPU driver support!!!

- Based on kernel 5.4.x and Yocto version dunfell

• NEW Yocto meta layer --> Github
• NEW DH Mainline based Starter Image
• NEW Linux and bootloader documentation

OpenSTLinux

Notes:

- Based on OpenSTLinux v2.0

- GPU support based on original vivante GPU driver.

- Based on kernel 5.4.x and Yocto version dunfell

• Yocto meta layer --> Github

DH electronics Github contains the meta-av96 layer for ST v1.2.0 SDK. Please see readme.txt which describes the build process.

• OpenSTLinux-2.0 based on Yocto Dunfell LTS and Linux 5.4 - v6.0 Starter Image (Supported by Arrow Electronics)

This Image also includes four different bootmodes to support some mezzanine boars. See here, how to change between them.

Starter Image Changelog

X-LINUX-AI OpenSTLinux Expansion Package: Description: Expansion Package that targets artificial intelligence for STM32MP1 Series devices.

• NEW X-LINUX-AI OpenSTLinux Expansion Package
• NEW How to install X-LINUX-AI v2.0.0 on Avenger96 board

Debian

• Debian Buster Starter Image

Useful instructions

SPI Flash and eMMC Image Programming

• Avenger96 Image Programming

Links

• STM32 MPU wiki
• STM32 MPU wiki - Device tree configuration
• STM32MP15 resources
• 96Boards