Software 428-500: Difference between revisions

Revision as of 08:27, 28 May 2015

To write your own VDHL-code you can use the ispLEVER Classic Software from Lattice ([1]

You also need a programmer (e.g. HW-USBN-2A from Lattice) to deploy the VHDL-Code on your PLD.

After installing the software and the drivers for your programmer you can start a new project.

You can find a demo-project here:media:PLD-demo2.zip

For the demo-project you need an additional hardware.

You can find the schematic here:media:SRAM.pdf

You have to download the *.jed-File with the programmer to your PLD.

Revision as of 08:27, 28 May 2015 view source Sgonzo (talk \| contribs) 170 edits No edit summary ← Older edit		Revision as of 08:27, 28 May 2015 view source Sgonzo (talk \| contribs) 170 edits No edit summary Newer edit →
Line 15:		Line 15:
	For the demo-project you need an additional hardware.		For the demo-project you need an additional hardware.

	You can find the schematic here:[[media:SRAM]]		You can find the schematic here:[[media:SRAM.pdf]]