DRC02: Difference between revisions

From Wiki-DB
Jump to navigationJump to search
Newer edit →
Sgonzo (talk | contribs)
170 edits
Created page with "{| | | |- |__TOC__ |600px|DHCON DRC02 |} == Introduction == The AVENGER Board is a 96Boards compliant consumer edition board based on th..."
 
Sgonzo (talk | contribs)
170 edits
No edit summary
Line 8: Line 8:


== Introduction ==
== Introduction ==
The AVENGER Board is a 96Boards compliant consumer edition board based on the STM32MP15 series of SoCs. The STM32MP15 series
Our DHCON products are optimized for smart home & building as well as Industry 4.0 and IoT applications.
is a highly integrated multi-market applications processor designed to enable secure and portable applications within the Internet of Things.  
 
AVENGER board features Dual-core Arm® Cortex®-A7 processors operating at up to 650 Hz, Single core Arm® Cortex® M4 operating up to
Why should you build on our DHCON products?
209 MHz. In addition, an extensive set of interfaces and connectivity peripherals are included to interface to cameras, touch-screen displays,
 
MMC/SD cards and media processor engine. It also fully supports wireless communication, including WLAN and BLE.
Individual IoT edge solutions – made easy
Highest flexibility as Docker or LXC host
Lowest power – built-in security
Available for 10+ years


== Technical Details ==
== Technical Details ==
Line 21: Line 24:
|-
|-
|valign="top" style="border: 0pt;" |  
|valign="top" style="border: 0pt;" |  
* '''STM32MP157AAC
* '''Standard with DHCOM i.MX6 Solo (other module optional)
**2x ARM® Cortex-A7 up to 650 MHz
*'''BSPs''' 1x 3D GPU Vivante®  @ 533 MHz - OpenGL® ES 2.0
**1x ARM® Cortex-M4 up to 209 MHz
*'''Ethernet''' STPMIC1A
'''
*'''USB''' 1024 Mbyte  @ 533 MHz
*'''GPU''' 1x 3D GPU Vivante®  @ 533 MHz - OpenGL® ES 2.0
*'''Serial''' 8 Gbyte, v4.51 interface
*'''PMIC''' STPMIC1A
*'''SD-Card''' 2 Mbyte, Quad SPI interface
*'''DDR3 DRAM''' 1024 Mbyte  @ 533 MHz
*'''CAN''' 128 byte
*'''eMMC Flash''' 8 Gbyte, v4.51 interface
*'''Display''' UHS-I speed grade, v3.01
*'''NOR Flash''' 2 Mbyte, Quad SPI interface
*'''Buttons''' 2x type A, 2.0 high-speed
*'''EEPROM''' 128 byte
*'''LEDs''' 1x type micro-AB, 2.0 high-speed
*'''microSD Socket''' UHS-I speed grade, v3.01
*'''Inputs''' WXGA (1366x768) @ 60 fps, HDMI 1.4
*'''USB Host''' 2x type A, 2.0 high-speed
*'''Outputs'''
*'''USB OTG''' 1x type micro-AB, 2.0 high-speed
*'''Inputs'''
*'''HDMI''' WXGA (1366x768) @ 60 fps, HDMI 1.4
*'''Power Supply'''  
*'''WiFi / Bluetooth'''  
*'''RTC'''  
**WiFi 5 GHz & 2.4GHz IEEE 802.11a / b / g / n / ac
*'''Cooling'''  
**Bluetooth® v4.2 (BR/EDR/BLE)
*'''Temperature range'''
**PCB antenna
*'''Dimensions'''
*'''Ethernet''' 10 / 100 / 1000 Mbit/s, IEEE 802.3-compliant
*'''Certifications'''   
|valign="top" style="border: 0pt;" |
*'''Push-Buttons''' Power and reset
*'''Battery Socket''' CR1216, CR1220 and CR1225
*'''LEDs'''
**4x green user controlled LEDs
**1x blue Bluetooth enabled
**1x yellow WiFi enabled
**1x red power supply okay
*'''Boot Mode''' 3 bit boot mode switch
*'''Debug Interface''' JTAG interface via tag-connect
*'''Supply (SYS_DCIN)''' 8 - 18 VDC
*'''Temperature Range''' 0 - 40 °C
*'''Dimensions ''' 100 x 85 mm
*'''Serial Peripherals'''   
**2 x UART
**2 x I2C
**1 x I2S
**1 x SPI
**1 x GPIOs
|}
|}


== Downloads ==
== Downloads ==
==== Documents ====
==== Documents ====
* [[media:DOC_Getting-Started-588-100_R06_2019-04-12.pdf|Getting-Started]]
*'''[[media:Datasheet_DRC02.pdf|DRC02 datasheet]]'''
 
==== DHCOR STM32MP1 schematic and layout symbols ====
* [[media:DHCOR-STM32MP1-Design-Symbols_2019-04-11_2.zip|DHCOR STM32MP1 Allegro/Orcad symbols]]
 
==== DHCOR STM32MP1 STM CubeMX configuration ====
* [[media:DHCOR-PinMux-TFBGA361-Avenger96-HW200_2019-04-05.zip|Avegner96 CubeMX configuration]]
 
==== Binary package ====
* [[media:Avenger96_v1.2_binary_deploy.zip|Avenger96 v1.2 binary package for eMMC programming]]


==== Yocto meta layer ====
*'''[[media:USM_Bedienungsanleitung_DRC02_R01_2019-03-18.pdf|DRC02 usermanual]]'''
* [[media:Meta-av96.thud.5fe50075_2019-04-25.zip|Yocto meta layer (based on v2.0.2 image from 2019-04-25)]]
The package contains the new meta-av96 layer for the ST v1.0.0 SDK. Please see readme.txt which describes the build process.


==== Images====
==== Images====
* [[media:Avenger96_v2.0.2_2019-04-25.zip|Avenger96 v2.0.2 Starter Image]]

Revision as of 10:37, 30 April 2019

DHCON DRC02

Introduction

Our DHCON products are optimized for smart home & building as well as Industry 4.0 and IoT applications.

Why should you build on our DHCON products?

Individual IoT edge solutions – made easy Highest flexibility as Docker or LXC host Lowest power – built-in security Available for 10+ years

Technical Details

  • Standard with DHCOM i.MX6 Solo (other module optional)
  • BSPs 1x 3D GPU Vivante® @ 533 MHz - OpenGL® ES 2.0
  • Ethernet STPMIC1A
  • USB 1024 Mbyte @ 533 MHz
  • Serial 8 Gbyte, v4.51 interface
  • SD-Card 2 Mbyte, Quad SPI interface
  • CAN 128 byte
  • Display UHS-I speed grade, v3.01
  • Buttons 2x type A, 2.0 high-speed
  • LEDs 1x type micro-AB, 2.0 high-speed
  • Inputs WXGA (1366x768) @ 60 fps, HDMI 1.4
  • Outputs
  • Inputs
  • Power Supply
  • RTC
  • Cooling
  • Temperature range
  • Dimensions
  • Certifications

Downloads

Documents

Images

Retrieved from "https://wiki.dh-electronics.com/index.php?title=DRC02&oldid=2404"