Software 428-500

PLD

Development Software

To write your own VDHL-code you can use the ispLEVER Classic Software from Lattice ([1]

You also need a programmer (e.g. HW-USBN-2A from Lattice) to deploy the VHDL-Code on your PLD.

After installing the software and the drivers for your programmer you can start a new project.

Programming example

You can find a demo-project here:media:PLD-demo2.zip

For the demo-project you need an additional hardware.

You can find the schematic here:media:SRAM.pdf

IO addressing

DHCOM:	SRAM hardware:	Connector:
A0	PLD_A0	PLD_IO7 / X11 Pin7
A1	PLD_A1	PLD_IO9 / X11 Pin9
A2	PLD_A2	PLD_IO11 / X11 Pin11
A3	PLD_A3	PLD_IO13 / X11 Pin13
A4	PLD_A4	PLD_IO15 / X11 Pin15
A5	PLD_A5	PLD_IO37 / X11 Pin9
A6	PLD_A6	PLD_IO39 / X11 Pin39
A7	PLD_A7	PLD_IO41 / X11 Pin41
A8	PLD_A8	PLD_IO43 / X11 Pin43
A9	PLD_A9	PLD_IO45 / X11 Pin45
A10	PLD_A10	PLD_IO44 / X11 Pin44
A11	PLD_A11	PLD_IO42 / X11 Pin42
A12	PLD_A12	PLD_IO40 / X11 Pin40
A13	PLD_A13	PLD_IO38 / X11 Pin38
A14	PLD_A14	PLD_IO36 / X11 Pin36
A15	PLD_A15	PLD_IO12 / X11 Pin12
	PLD_A16	PLD_IO10 / X11 Pin10
	PLD_A17	PLD_IO8 / X11 Pin8
CS_A	RAM_CS	PLD_IO17 / X11 Pin17
OE	RAM_OE	PLD_IO14 / X11 Pin14
WE	RAM_WE	PLD_IO35 / X11 Pin35
	RAM_LB	PLD_IO18 / X11 Pin18
	RAM_UB	PLD_IO16 / X11 Pin16
D0	PLD_D0	PLD_IO19 / X11 Pin19
D1	PLD_D1	PLD_IO21 / X11 Pin21
D2	PLD_D2	PLD_IO23 / X11 Pin23
D3	PLD_D3	PLD_IO25 / X11 Pin25
D4	PLD_D4	PLD_IO27 / X11 Pin27
D5	PLD_D5	PLD_IO29 / X11 Pin29
D6	PLD_D6	PLD_IO31 / X11 Pin31
D7	PLD_D7	PLD_IO33 / X11 Pin33
D8	PLD_D8	PLD_IO34 / X11 Pin34
D9	PLD_D9	PLD_IO32 / X11 Pin32
D10	PLD_D10	PLD_IO30 / X11 Pin30
D11	PLD_D11	PLD_IO28 / X11 Pin28
D12	PLD_D12	PLD_IO26 / X11 Pin26
D13	PLD_D13	PLD_IO24 / X11 Pin24
D14	PLD_D14	PLD_IO22 / X11 Pin22
D15	PLD_D15	PLD_IO20 / X11 Pin20

You have to download the *.jed-File with the programmer to your PLD.