DHCOM iMX6-D2

From Wiki-DB
Jump to navigationJump to search
COM iMX6-D2

Hardware

  • Cortex-A9 Freescale i.MX6 Solo/Dual(Lite)/Quad up to 1.2GHz
  • 2D/3D graphics accelerator
  • 0 - 512 MByte NAND flash memory (8 bit bus width) or 2 - 16 GByte eMMC flash
  • 2 MB SPI boot flash
  • 256 - 2048 MByte DDR3-1066 or DDR3-800
  • On-board microSD card socket
  • SD/MMC card interface, 4 bit SDIO
  • LC display controller, 24 bit colors, 2048x1536 pixels
  • LVDS 4-channel, max. 165 Mpixels/s
  • On-board touch controller for 4-wire resistive touch screens
  • Ethernet controller 10/100 Mbit, IEEE1588 conform
  • USB 2.0 OTG high-speed
  • USB 2.0 host high speed
  • Full function UART
  • Standard UART with hardware handshake support
  • Standard UART
  • CAN interface
  • 2 x SPI interface
  • 2 x I2CTM interface
  • I²S Audio codec (1 x microphone, 1 x Line in, 1x Line out)
  • Real-time clock (I2CTM connection), low power temperature compensated
  • 12 bit analog input
  • 1 kbit EEPROM with integrated MAC address
  • 16 bit address/databus interface on SODIMM-200 socket
  • PWM channel
  • 23 GPIOs
  • JTAG debug connection via FFC plug connector
  • Industrial temperature range (-40°C to +85°C)
  • SODIMM-200 socket with DHCOM pin assignment

Software Support

Downloads

U-Boot Sources

Update-Kernel

Linux Kernel Sources

Debian Rootfilesystem

Virtual Machine for Application Development

Code Examples for Userspace-Applications to Access SPI, I2C, GPIOs, and more

WEC7 DHHalLib.dll (function library)

WEC7 binary BSP