DHSBC STM32MP2x

The DHSBC STM32MP25 board is the official DHCOS STM32MP25x reference design!

Introduction

Reference design for secure industrial IoT devices based on STM32MP13x

• Single Board Computer based on the solderable DHCOS STM32MP25
• Compatible with accessories from the Raspberry Pi© community
• Highlights: Bluetooth / WiFi, Dual GB Ethernet, Secure Boot, OP-TEE support
• Trusted Platform Module 2.0 available on request
• Mainline Linux support and active software maintenance
• Industrial product design with CE certification
• Guaranteed long-term availability of 10+ years

Technical Details

STM32MP255C 2x ARM Cortex-A35 with 1.2 GHz 1x ARM Cortex-M33 up to 400 MHz PMIC STPMIC25D LPDDR4 32-bit 4 Gbyte @ 1200 MHz eMMC Flash 16 Gbyte NOR Flash 4 Mbyte, Quad SPI interface EEPROM 4 kbyte microSD socket RTC temp. compensated RV-3032-C7 USB Host 1x type A, 2.0 high-speed USB Type-C 1x USB-C 3.2 Gen 1x1 with DisplayPort alt. mode support WiFi / Bluetooth Tri band 2.4 GHz, 5 GHz and 6 GHz for IEEE802.11a/b/g/n/ac/ax Bluetooth® v5.4 BR/EDR/LE Antenna: U-FL connector Ethernet 2x 10 / 100 / 1000 Mbit/s, IEEE 802.3-compliant

LVDS 1x Dual Link, 2x 4-lane LVDS connector MIPI-CSI2 1x 2-lanes connector TPM (Trusted Platform Module)2.0 device ST33KTPM2I Push-Buttons Power and reset Battery Socket CR1216, CR1220 and CR1225 Boot Mode 4 bit boot mode switch Debug Interface JTAG interface via tag-connect Supply 5 VDC, USB Type-C power supply port Dimensions 85 x 56 mm Raspberry Pi 40-pin Expansion 2 x UART 1 x I2C 1 x I2S 1 x SPI 2 x PWM 2 x CAN up to 28 x GPIOs

Documentation

• Getting-Started with DHSBC STM32MP25
• DHCOS STM32MP2x User Manual IMPORTANT: Please have a look at chapter 27. Hardware design checklist

Software

• Build your own Yocto LTS via kas (GitHub)
• Yocto BSP meta layer (Github)

Links

• DH DHCOS STM32MP2x
• DH DHSBC STM32MP25
• STM32 MPU wiki
• STM32MP23 resources
• STM32MP25 resources