DHCOM iMX6ULL-D2: Difference between revisions

From Wiki-DB
Jump to navigationJump to search
No edit summary
Line 16: Line 16:
|-
|-
|valign="top" style="border: 0pt;" |  
|valign="top" style="border: 0pt;" |  
* '''Cortex-A9 Freescale i.MX6 Solo/Dual(Lite)/Quad up to 1.2GHz'''
* '''Cortex-A7 NXP i.MX6ULL up to 900 MHz'''
* 2D/3D graphics accelerator
* 128 - 1024 MByte NAND flash memory (8 bit bus width) or<br>4 - 16 GByte eMMC flash (8 bit bus width)
* 0 - 512 MByte NAND flash memory (8 bit bus width) or 2 - 16 GByte eMMC flash
* 2 MB SPI boot flash
* 2 MB SPI boot flash
* 256 - 2048 MByte DDR3-1066 or DDR3-800
* 128 - 1024 MByte DDR3-800
* On-board microSD card socket
* On-board microSD card socket
* SD/MMC card interface, 4 bit SDIO
* SD/MMC card interface, 4 bit SDIO
* LC display controller, 24 bit colors, 2048x1536 pixels
* LC display controller, 18 bit colors, 1366x768 pixels
* LVDS 4-channel, max. 165 Mpixels/s
* On-chip touch controller for 4-wire resistive touch screens
* On-board touch controller for 4-wire resistive touch screens
* 2x Ethernet controller 10/100 Mbit, IEEE1588 conform
* Ethernet controller 10/100 Mbit, IEEE1588 conform
* USB 2.0 OTG high-speed
* USB 2.0 OTG high-speed
* USB 2.0 host high speed
* USB 2.0 host high speed
* Full function UART  
* Standard UART
* Standard UART with hardware handshake support
* Standard UART with hardware handshake support
* Standard UART
|valign="top" style="border: 0pt;" |  
|valign="top" style="border: 0pt;" |  
* CAN interface  
* WiFi iEEE802.11b/g/n + Bluetooth v4.1 (BR/EDR/BLE) module on BGA
* 2 x SPI interface  
* 2x CAN interface  
* 2 x I2CTM interface  
* 2x SPI interface  
* 2x I2CTM interface  
* I²S Audio codec (1 x microphone, 1 x Line in, 1x Line out)
* I²S Audio codec (1 x microphone, 1 x Line in, 1x Line out)
* Real-time clock (I2CTM connection), low power temperature compensated
* Real-time clock (I2CTM connection), low power temperature compensated
* 12 bit analog input  
* 2x 10 bit analog input  
* 1 kbit EEPROM with integrated MAC address  
* 2x 256 byte EEPROM with integrated MAC address  
* 16 bit address/databus interface on SODIMM-200 socket
* PWM channel
* PWM channel
* 23 GPIOs
* 9 GPIOs
* JTAG debug connection via FFC plug connector  
* JTAG debug connection via FFC plug connector  
* Industrial temperature range (-40°C to +85°C)
* Industrial temperature range (-40°C to +85°C)

Revision as of 09:34, 9 May 2019

COM iMX6ULL-D2

Hardware

  • Cortex-A7 NXP i.MX6ULL up to 900 MHz
  • 128 - 1024 MByte NAND flash memory (8 bit bus width) or
    4 - 16 GByte eMMC flash (8 bit bus width)
  • 2 MB SPI boot flash
  • 128 - 1024 MByte DDR3-800
  • On-board microSD card socket
  • SD/MMC card interface, 4 bit SDIO
  • LC display controller, 18 bit colors, 1366x768 pixels
  • On-chip touch controller for 4-wire resistive touch screens
  • 2x Ethernet controller 10/100 Mbit, IEEE1588 conform
  • USB 2.0 OTG high-speed
  • USB 2.0 host high speed
  • Standard UART
  • Standard UART with hardware handshake support
  • WiFi iEEE802.11b/g/n + Bluetooth v4.1 (BR/EDR/BLE) module on BGA
  • 2x CAN interface
  • 2x SPI interface
  • 2x I2CTM interface
  • I²S Audio codec (1 x microphone, 1 x Line in, 1x Line out)
  • Real-time clock (I2CTM connection), low power temperature compensated
  • 2x 10 bit analog input
  • 2x 256 byte EEPROM with integrated MAC address
  • PWM channel
  • 9 GPIOs
  • JTAG debug connection via FFC plug connector
  • Industrial temperature range (-40°C to +85°C)
  • SODIMM-200 socket with DHCOM pin assignment

Software Support

Downloads

U-Boot Sources

Update-Kernel

Linux Kernel Sources / Prebuilt Kernels

  • Mainline
  • Vendor

Debian based root file systems

  • Debian alone
  • Debian Qt5

Virtual Machine for Application Development

Mainline Linux 4.4.x eMMC update package

Code Examples for Userspace-Applications to Access SPI, I2C, GPIOs, and more

WEC7 DHHalLib.dll (function library)

WEC7 binary BSP

WEC2013 DHHalLib.dll (function library)