DHSBC STM32MP13: Difference between revisions

From Wiki-DB
Jump to navigationJump to search
Ageisreiter (talk | contribs)
Ageisreiter (talk | contribs)
No edit summary
Line 77: Line 77:
* [https://www.dropbox.com/scl/fi/qw4w8y4mwyztalvotos1v/DHCOR-STM32MP13-Symbol-Footprint.zip?rlkey=9twtzutrerlw61a3zel3gl720&st=3c9ibw89&dl=0 DHCOR STM32MP13 Allegro/layout symbol]
* [https://www.dropbox.com/scl/fi/qw4w8y4mwyztalvotos1v/DHCOR-STM32MP13-Symbol-Footprint.zip?rlkey=9twtzutrerlw61a3zel3gl720&st=3c9ibw89&dl=0 DHCOR STM32MP13 Allegro/layout symbol]
* [https://www.dropbox.com/scl/fi/jje7b8vn9tllsu96smpjr/DHCOR-STM32MP13-3D-STEP-718-100_R01_2024-03-06.zip?rlkey=8yjki1zvhzqoo0a76znuki0vn&st=pwcz7b8y&dl=0 DHCOR STM32MP13 3D STEP file]
* [https://www.dropbox.com/scl/fi/jje7b8vn9tllsu96smpjr/DHCOR-STM32MP13-3D-STEP-718-100_R01_2024-03-06.zip?rlkey=8yjki1zvhzqoo0a76znuki0vn&st=pwcz7b8y&dl=0 DHCOR STM32MP13 3D STEP file]
== Software ==
=== DH Mainline based Linux ===
* [https://github.com/dh-electronics/kas-dhsom Build your own Yocto Scarthgap LTS via kas (GitHub)]

Revision as of 14:34, 5 August 2024

The DHSBC STM32MP13x board is the official DHCOR STM32MP13 reference design!

COM Avenger96Board

Introduction

Reference design for secure industrial IoT devices based on STM32MP13x

  • Single Board Computer based on the solderable DHCOR STM32MP13
  • Compatible with accessories from the Raspberry Pi© community
  • Highlights: Bluetooth / WiFi, Dual GB Ethernet, Secure Boot, OP-TEE support
  • Trusted Platform Module 2.0 available on request
  • Mainline Linux support and active software maintenance
  • Industrial product design with CE certification
  • Guaranteed long-term availability of 10+ years

Technical Details

  • STM32MP135F
    • 1x ARM® Cortex-A7 up to 1 GHz

  • PMIC STPMIC1D
  • DDR3 DRAM 512 Mbyte @ 533 MHz
  • eMMC Flash 4 Gbyte
  • NOR Flash 4 Mbyte, Quad SPI interface
  • EEPROM 4 kbyte
  • RTC temp. compensated RV-3032-C7
  • USB Host 1x type A, 2.0 high-speed
  • USB Device 1x Type-C, 2.0 high-speed
  • WiFi / Bluetooth
    • WiFi 2.4GHz IEEE 802.11b / g / n
    • Bluetooth® v5.2 (BR/EDR/BLE)
    • Antenna: U-FL connector
  • Ethernet 10 / 100 / 1000 Mbit/s, IEEE 802.3-compliant
  • TPM (Trusted Platform Module)2.0 device ST33TPHF2XSPI
  • Push-Buttons Power and reset
  • Battery Socket CR1216, CR1220 and CR1225
  • Boot Mode 3 bit boot mode switch
  • Debug Interface JTAG interface via tag-connect
  • Supply (SYS_DCIN) 8 - 18 VDC
  • Temperature Range 0 - 40 °C
  • Dimensions 85 x 56 mm
  • Raspberry Pi 40-pin Expansion
    • 2 x UART
    • 1 x I2C
    • 1 x I2S
    • 1 x SPI
    • 2 x PWM
    • 2 x CAN
    • up to 28 x GPIOs

Product Change Notifications (PCN)

DHCOR STM32MP13

Downloads

Documentation

Design Files

Software

DH Mainline based Linux